Lenco Ipd-4000 Handleiding

Lenco Cradle/docking station Ipd-4000

Lees hieronder de 📖 handleiding in het Nederlandse voor Lenco Ipd-4000 (30 pagina's) in de categorie Cradle/docking station. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/30
BEFORE USING THIS PRODUCT, READ, UNDERSTAND, AND
FOLLOW THESE INSTRUCTIONS.
Save this booklet for future reference.
OWNER'S MANUAL
iPod Hifi Docking station
MODEL NO.: IPD-4000
iPod Hifi Docking station
12
OWNER'S MANUAL
iPod Hifi Docking station
OWNER'S MANUAL
English
English
C A U T I O N
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
IMPORTANT SAFETY INSTRUCTIONS
1.) Read these instructions.
2.) Keep these instructions.
3.) Heed all warnings.
4.) Follow all instructions.
5.) Do not use this apparatus near water.
6.) Clean only with dry cloth.
7.) Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8.) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9.) Do not defeat the safety purpose of the plug. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10.) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11.) Only use attachments / accessories specified by the manufacturer.
12.) Unplug this apparatus during lightning storms or when unused for long periods of time.
13.) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
14.) This appliance shall not be exposed to dripping or splashing water and no object filled
with l liquids such as vases shall be placed on the apparatus.
15.) Do not overload wall outlet. Use only power source as indicated.
16.) Use replacement parts as specified by the manufacturer.
17.) The product may be mounted to a wall only if recommended by the manufacturer.
18.) Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks.
19.) Attention should be drawn to the environmental aspects of battery disposal
The lightning flash with arrowhead
symbol, within an equilateral
triangle is intended to alert the
user to the presence of insulated
‘dangerous voltage’ within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK) , NO USER
SERVICEABLE PARTS
INSIDE
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
The exclamation point within
an equilateral triangle is
intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying
the appliance.
IMPORTANT NOTES
z Avoid installing this unit in places
exposed to direct sunlight or close to
heat radiating appliances such as
electric heaters, on top of other stereo
equipment that radiates too much heat,
places lacking ventilation or dusty
areas, places subject to constant
vibration and/or humid or moist areas.
z No naked flame sources, such as
lighted candles, should be placed on
the apparatus.
z The apparatus shall not expose to
dripping or splashing. No objects filled
with liquids, such as vases, shall be
placed on the apparatus.
z Do not attempt to clean this unit with
chemical solvents as this might
damage the finish. Use a clean dry
cloth.
z Operate controls and switches as
described in the manual.
z Before turning ‘On’ the power, make
certain that power cord is properly
installed.
z When moving the set, be sure to first
disconnect the power cord.
PREPARATION FOR USE
UNPACKING AND SET UP
z Carefully remove all the components from the display carton and verify
that you have all the necessary components before you dispose of the
display carton.
z Remove all packing materials from the individual components. Remove
any descriptive labels that may be attached to the front panel of the main
unit. Do not remove any labels or stickers on the back panels of the main
unit or the speakers.
z Place all the components in the desired location. This system is designed
to be used on level, stable, flat surface such as a table, desk, shelf, o
r
stand, convenient to an AC outlet, out of direct sunlight, and away from
sources of excess heat, dust, moisture, or vibration.
z Unwind the AC power cord on the back of the unit and extend the cord to
its full length
iPod Hifi Docking station
34
OWNER'S MANUAL
iPod Hifi Docking station
OWNER'S MANUAL
English
English
POWER SOURCE
This system is designed to operate on 230V AC
50Hz house current only.
Connecting this system to any other power source
may cause damage to the system and such damage
is not covered by your warranty.
NOTE: The system has an AC plug and will only fit into matching AC outlets.
This is a safety feature to reduce the possibility of electric shock. If the plug will
not fit in your AC outlets, you should have the outlet changed by a qualified,
licensed electrician. Do not use an adapter to make the plug fit into your outlet.
This defeats the safety feature and could expose you to electric shock.
PROTECT YOUR FURNITURE
This model is equipped with non-skid rubber 'feet' to prevent the product from
moving when you operate the controls. These 'feet' are made from
non-migrating rubber material specially formulated to avoid leaving any marks
or stains on your furniture. However certain types of oil based furniture
polishes, wood preservatives, or cleaning sprays may cause the rubber 'feet' to
soften, and leave marks or a rubber residue on the furniture. To prevent any
damage to your furniture we strongly recommend that you purchase small
self-adhesive felt pads, available at hardware stores and home improvement
centers everywhere, and apply these pads to the bottom of the rubber 'feet'
before you place the product on fine wooden furniture.
LOCATION OF CONTROLS AND INDICATORS
TOP PANEL
FRONT PANEL

Product specificaties

Merk: Lenco
Categorie: Cradle/docking station
Model: Ipd-4000

Heb je hulp nodig?

Als je hulp nodig hebt met Lenco Ipd-4000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Cradle/docking station Lenco

Lenco

Lenco BTA-101 Handleiding

29 Mei 2023
Lenco

Lenco PMX-350 Handleiding

16 April 2023
Lenco

Lenco BT-300 Handleiding

13 April 2023
Lenco

Lenco Ipd-4000 Handleiding

8 April 2023
Lenco

Lenco IPD-3100 Handleiding

3 April 2023
Lenco

Lenco IPD-9000 Handleiding

26 Maart 2023
Lenco

Lenco iPD-4800 Handleiding

25 Maart 2023
Lenco

Lenco BTT-1 Handleiding

11 Maart 2023
Lenco

Lenco MCI-400 Handleiding

27 Januari 2023
Lenco

Lenco BTT-6 Handleiding

15 November 2022

Handleiding Cradle/docking station

Nieuwste handleidingen voor Cradle/docking station

Acme Made

Acme Made SA104 Handleiding

16 April 2024
Vorago

Vorago Bocina BT 450 Handleiding

6 April 2024
Merlin

Merlin TimberTunes Handleiding

3 April 2024
Maxell

Maxell BT3100 Handleiding

19 Maart 2024
CLUB3D

CLUB3D CSV-3203 Handleiding

19 Maart 2024
Majestic

Majestic Flash Handleiding

19 Maart 2024
Axagon

Axagon ADSA-M2C Handleiding

19 Maart 2024
Inter-Tech

Inter-Tech ST-3525 Handleiding

18 Maart 2024
Sonnet

Sonnet Echo 5 Thunderbolt 4 Hub Handleiding

18 Maart 2024
Axagon

Axagon ADSA-SN Handleiding

18 Maart 2024