Legrand V20GB306 Handleiding

Bekijk gratis de handleiding van Legrand V20GB306 (1 pagina’s), behorend tot de categorie Stekkerdoos. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.7 sterren uit 8 reviews. Heb je een vraag over Legrand V20GB306 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

WIREMOLD TEMPORARY POWER TAP

CORD-ENDED PLUGMOLD

®

2000 UNITS

INSTALLATION INSTRUCTIONS

WARNING:For maximum safety, this Wiremold Temporary

Power Tap is equipped with a grounding type plug (3-prong) for

use onlywith grounding type receptacles. modification of the

plug to allow its use in non-grounding receptacles voids the

warranty and may lead to electrical shock.

1.Be sure the proposed location for the Wiremold Temporary

Power Tap is close enough to an existing wall outlet to be

reached by the cordset.

2.Line up and locate where to install the mounting clips. for

best results, snap a chalkline or draw a guide line. When

unit is to be installed under an overhanging surface, such

as under a cupboard or shelf, allow at least 1/2" [12.7mm]

clearance between the top side of the unit and the

overhanging surface. This will avoid interference with plug

caps of the cords on tools, appliances, etc. to be powered

by the strip.

3.Install mounting clips. IMPORTANT – if the flat head screws

furnished are used, the substitute fasteners must also not

be of the flat head type, or the unit will not seat securely

in the mounting clips.

4.Snap temporary power tap into mounting clips, and plug

cordset into the wall outlet.

Wiremold Electrical Systems conform to and should be installed and

properly grounded in compliance with requirements of the current

National Electrical Code, Canadian Electrical Code or codes administered

by local authorities.

All electrical products may represent possible shock or fire hazard if

improperly installed or used. Wiremold electrical products are UL Listed

to U.S. and Canadian safety standards, made for interior use only, and

should be installed in conformance with current local and/or the National

Electrical Code.

The Wiremold Company

U.S. and International: 60 Woodlawn Street • West Hartford, CT 06110

1-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6251

Canada: 850 Gartshore Street • Fergus, Ontario N1M 2W8

1-800-741-7957 • FAX 519-843-5980

© Copyright 2002 The Wiremold Company All Rights Reserved

28781R1 0702

Product specificaties