Lectrosonics ZS-LRLT Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Lectrosonics ZS-LRLT (24 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
LT
Synthesized UHF Belt-Pack Transmitter
Featuring
Digital Hybrid Wireless®
Technology
US Patent 7,225,135
INSTRUCTION MANUAL
Rio Rancho, NM, USA
www.lectrosonics.com
Fill in for your records:
Serial Number:
Purchase Date:
Quick Start Steps
1) Install good batteries and turn power on (see pages
6 and 7).
2) Set the compatibility mode to match the receiver
(see page 10).
3) Connect the signal source and adjust input gain for
optimum modulation level (see pages 10 and 11).
4) Set Step Size and frequency to match receiver
(see page 11). Also see receiver manual for scan-
ning procedure to find a clear operating frequency.
5) Turn on the receiver and verify that solid RF and
audio signals are present (see receiver manual).
LT
LECTROSONICS, INC.
2
Digital Hybrid Wireless Belt-Pack Transmitter
Rio Rancho, NM 3
Consumer Alert for US Users - FCC Order DA 10-92
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this micro-
phone system without a license is subject to certain restrictions: the system may not cause harmful interference; it
must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received
from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless mi-
crophone systems, and these rules are subject to change. For more information, call the FCC at 1-888- CALL-FCC
(TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.
To operate wireless microphone systems at power greater than 50mW, you must qualify as a Part 74 user and be
licensed. If you qualify and wish to apply for a license go to: http://www.fcc.gov/Forms/Form601/601.html
Table of Contents
Introduction 4 ...........................................................................
Battery Installation 6 ...............................................................
Belt Clips 6 ...............................................................................
IR (infrared) Sync 6 ..................................................................
Operating Instructions 7 .........................................................
Battery Status LED Indicator 7 ..............................................
Powering On in Operating Mode 7 .........................................
Powering On in Standby Mode 8 ...........................................
Powering Off 8 .......................................................................
Navigating Menus 8 ...............................................................
Adjusting LCD Backlight 8 .....................................................
RF ON/OFF on the Menu 8 ....................................................
Power Menu 8 ........................................................................
Locking/Unlocking Changes to Settings.............................. 9
Selecting Programmable Switch Functions......................... 9
Main Window Indicators ...................................................... 9
Selecting the Compatibility (Compat) Mode 10 ........................
Connecting the Signal Source 10 ............................................
Using Line Level and Instrument Inputs 10 .............................
Selecting the Low Frequency Roll-off 10 .................................
Adjusting the Input Gain 11 ......................................................
Selecting Step Size 11 .............................................................
Selecting Frequency 11 ...........................................................
Selecting Frequency Using Two Buttons 12 .............................
Helpful Features on Receivers 12 ............................................
About Overlapping Frequency Blocks 12 .................................
Selecting Audio Polarity (Phase) 12 .........................................
Selecting Battery Type ........................................................ 12
Enabling Remote Control 13 ....................................................
Setting Transmitter Output Power 13 .......................................
Restoring Default Settings 13 ..................................................
IR Sync Operation 13 ...............................................................
5-Pin Input Jack Wiring 14 ........................................................
Microphone Cable Termination
for Non-Lectrosonics Microphones 15 .............................
Input Jack Wiring for Different Sources 16 .............................
Compatible Wiring for Both Servo Bias Inputs
and Earlier Transmitters: ..................................................... 16
Simple Wiring for Servo Bias Inputs ONLY: ......................... 16
Microphone RF Bypassing 17 ..................................................
Line Level Signals 17 ...............................................................
Accessories 18 ..........................................................................
Troubleshooting 19 ....................................................................
Specifications and Features 20 ................................................
Service and Repair 22 ...............................................................
Returning Units for Repair 22 ..................................................


Product specificaties

Merk: Lectrosonics
Categorie: Niet gecategoriseerd
Model: ZS-LRLT

Heb je hulp nodig?

Als je hulp nodig hebt met Lectrosonics ZS-LRLT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Lectrosonics

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd