Lazer Impala Handleiding

Lazer Niet gecategoriseerd Impala

Lees hieronder de 📖 handleiding in het Nederlandse voor Lazer Impala (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

Thank you for choosing the Lazer

helmet. You have made an excellent

choice that will help to reinforce your

safety while cycling: the sport for which

this helmet has been designed. Lazer

helmets conform to the strict criteria of

international standards.

Wearing a helmet may reduce the

seriousness of injuries to the head that

may occur during a sports accident. For

this reason, it is important to use this

protective gear properly.

Instructions for use and care

1) No helmet can protect the wearer

against all possible impacts.

2) The helmet is designed to be retained by

a strap under the lower jaw.

3) To be eective, a helmet must t and

be worn correctly. To check for correct

t, place helmet on head and make any

adjustments indicated. Securely fasten

retention system. Grasp the helmet and try

to rotate it to the front and rear. A correctly

tted helmet should be comfortable and

should not move forward to obscure vision

or rearward to expose the forehead.

4) No attachments should be made to the

helmet except those recommended by the

helmet manufacturer.

5) The helmet is designed to absorb shock

by partial destruction of the shell and liner.

This damage may not be visible. Therefore,

if subjected to a severe blow, the helmet

should be destroyed and replaced even if it

appears undamaged.

6) The helmet may be damaged and

rendered ineective by petroleum and

petroleum products, cleaning agents,

paints, adhesives and the like, without the

damage being visible to the user.

7) A helmet has a limited lifespan in use

and should be replaced when it shows

obvious signs of wear.

8) This helmet should not be used by

children while climbing or doing other

activities where there is a risk of hanging or

strangulation if the child gets trapped whilst

wearing the helmet.

9) This helmet is designed only for the

following activity: cycling, roller skate,

skateboard. It is not designed to be used

with mopeds or any other type of sport,

mechanical or not.

The Lazer Impala helmet comes with

an action camera mount, suitable for

attaching a camera or lights with a

standard GoPro mounting system.

To attach the action camera mount to

the helmet:

1) Position the mount on the center

vent hole second from the front with

the arrow on the bottom of the mount

facing forward (as shown in diagram

1A).

2) Take one Velcro strap, feed it

through the center vent hole second

from the front, then back up through

the next vent hole (as shown in

diagram 1B).

3) Then feed the strap back through

the mount, double back and fasten

Velcro pads (as shown in diagram 1C).

4) Repeat steps 1-3 for the other side.

Forward facing

For a video guide to help with the following steps please

go to the following URL and click on how to videos:

www.youtube.com/user/LazerSport

1. How to install the action camera mount

IM PA L A

1. How to install the action camera mount

IM PA L A

1A) 1C)

1B)

Lamorinièrestraat 33-37

2018 Antwerp - Belgium

www.lazersport.com

For other and more helmet

instructions, please refer to

the owner manual included

with the helmet.

I M PA L A I M PA L A

2. How to use the adjustable visor 2. How to use the adjustable visor

Impala

USER MANUAL

The adjustable visor of the Impala

can be set in 3 dierent positions

depending on your preference.

1) To adjust the visor, simply loosen

by turning the visor bolts counter

clockwise using a small coin, large

at head screwdriver or similar blunt

object.

Position the visor where you want

it, then re-tighten the bolt by turning

clockwise.

Visor boltPositions 1, 2 and 3

Product specificaties

Merk:	Lazer
Categorie:	Niet gecategoriseerd
Model:	Impala
Geslacht:	Unisex
Aantal per verpakking:	1 stuk(s)
Ventilatie:	Ja
Hoofdkleur van product:	Green, Yellow
Kleuring:	Monochromatisch
Levensfase van consument:	Volwassene
Kleur helmvizier:	Groen
Activiteit:	Wielrennen
Helmvizier:	Ja
Type sporthoofdkleding:	Helm
Aantal ventilatiegaten:	22
Instelbaar vizier:	Ja
Geïntegreerde zonneklep:	Ja
Merkspecifieke beschermende kenmerken:	MIPS