Lava LVM-601.2 Handleiding

Lava Wandsteun LVM-601.2

Lees hieronder de 📖 handleiding in het Nederlandse voor Lava LVM-601.2 (14 pagina's) in de categorie Wandsteun. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14
| 2 | LVM-601.2
MADE IN SWEDEN
User Manual
LVM-601.2
Remote Controlled Motorized Wallmount
| 2 | LVM-601.2
MADE IN SWEDEN
General Safety Precautions
• Read the owners manual carefully before installation.
• Installation of the wallmount should be made by qualified installator.
This device is intended for installation of flatscreens in dry areas only.
• Other application is not recommended as it may damage the equipment.
• Do not try to operate the wallmount by hand.
Introduction
The wall mount is a remote controlled, motorized wall mount for LCD-TV and
Plasma-TV. The action is reversible, so you can install it for both left and right
action and it will angle out the TV up to 90 degrees! You can also install the
TV in the ceiling.
It will fit various sizes, from 26-inch up to 50-inch. (50kg maximum for in/out
action, 13kg for mounting in the ceiling). Vesa standard is not needed on your
TV as the installation brackets are individually adjustable. The construction
also features unique two way pitch adjustments which allows you to adjust the
TV to perfect horizontal and vertical alignment on the wall.
If you already have a late edition of Khor or Chameleon LCD from Lava Elec-
tronics, you can use the standard TV remote controls special buttons to oper-
ate the wall mount. If you do not, there are two alternatives: you can program
the receiver of the wall mount to operate on your existing remotes or you can
use the remote included in the package. This remote also has the key func-
tions, such as volume, program change, source, for operating the Khor and
Chameleon LCD-TV.
NOTE!
English
| 3 |
LVM-601.2 MADE IN SWEDEN
Assembly
The wall mount with a TV fitted are rather heavy,
so make sure that the wall you intend to mount it
on is solid. If not, you have to reinforce the wall
with a minimum 15mm plywood board in order
to make a safe installation. Pay attention that
screws are not included for mounting the
bracket in the wall. Screw should have maxi-
mum Ø 6mm, the head should have Ø of 12-16mm. Minimum 150 kg safe working load/
screw!
Before you start, make sure that you have the following tools available:
Drilling machine, drills, Philips 2 Screwdriver, (Pozidrive 2 Screwdriver), water level,
wrench (or 8 & 10mm fixed tool). Pay attention to electrical screwdriver may not be used
when assembly the wall mount.
2. Use the screw that match the size of your TV
to fix the U-profiles on the TV as the illustration
shows.
3. Fasten the L-profiles and cover plate to the frame. Three
screws on each L-profile is minimum. Make sure that you use
the self tapping M4 screws as the frame do not have any lead
threads.
X
4. Mount the package to the U-profiles fastened on the TV.
Pay attention to have max 35mm distance between the
outer end of mount and TV. If this is more, the mount will not
be able to open the full 90 degrees.
M4 (4+4+4 pcs)
M5 (4+4+4 pcs)
M6 (4+4+4 pcs)
M8 (4+4+4 pcs)
English
1. Use the template on back of the gift box to mark the four fixing holes for
the mount on the wall. Make sure to align them 100% vertical. Drill the holes
and securely fasten the screws. Do not tight them all the way, you will need
about 5mm clearance between the head and the wall when you hook the wall
mount on the screws. For larger units, or less stable walls, please also drill
some of the centre fastening points. (Located close to the actuator bracket).


Product specificaties

Merk: Lava
Categorie: Wandsteun
Model: LVM-601.2

Heb je hulp nodig?

Als je hulp nodig hebt met Lava LVM-601.2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wandsteun Lava

Handleiding Wandsteun

Nieuwste handleidingen voor Wandsteun