Lancom R&S UF-T60 Handleiding

Bekijk gratis de handleiding van Lancom R&S UF-T60 (1 pagina’s), behorend tot de categorie Firewall (hardware). Deze gids werd als nuttig beoordeeld door 39 mensen en kreeg gemiddeld 4.9 sterren uit 5 reviews. Heb je een vraag over Lancom R&S UF-T60 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

TECHNICAL DATA

Hardware

Power supplyExternal power supply 2x 12 –36 V

Max. power consumption40 W

Operating environmentTemperature range -20–70 °C; humidity 5–90 %, non-condensing

HousingRobust metal housing with mounting accessories for control cabinet mounting;

Network connections on the front side

FansNone

Dimensions (mm)68.4 x 130 x 150 (W x H x D)

Interfaces

ETH5x 10 / 100 / 1000 Mbps Gigabit Ethernet ports

SFP2x SFP ports

USB2x USB 3.0 ports

Console1x RJ45 configuration interface

Power supply1x 4-pin terminal block connector for connecting the power supply

GPIO1x 5-pin terminal block connector

Declaration of Conformity

Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in

compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of

the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc

Package contents

DocumentationQuick Reference Guide (DE/EN), Quick Install Guide (DE/EN), Service & Support Guide (DE/

EN)

AccessoriesDIN rail mounting accessories

MOUNTING AND CONNECTING THE DEVICE

LANCOM R&S®UF-T60

Quick Reference Guide

Cloud-ready

LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document

contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 111998/07/21

4

Please observe the following when setting up the device

AThe mains plug of the device must be freely accessible.

ADo not rest any objects on top of the device and do not stack multiple devices.

AKeep the device’s ventilation slots clear of obstruction.

AMount the device in a free slot of an appropriate control cabinet using the enclosed DIN rail mounting

material.

Before initial startup, please make sure to take notice of the information regarding the intended use under www.lancom-systems.com/safety!

Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.

a b LEDs HDD / Power

HDD offNo HDD read / write access

HDD greenHDD read / write access

POWER offDevice switched off

POWER blueDevice ready and accessible

e fLEDs ETH5 - ETH6 - SFP

e LEDs - Link detection

OffNo link detected

Green, permanentlyLink detected

f LEDs - Link activity

Offno link detected

Green, permanentlyLink detected, no port activity

Green, blinkingLink detected, port activity

c dLEDs ETH0 - ETH4 - TP Ethernet

c LEDs - Link speed

OffLink speed 10 Mbps

Green, permanentlyLinkSpeed 1000 Mbps

Orange, permanentlyLink speed 100 Mbps

d LEDs - Link activity

Offno link detected

Green, permanentlyLink detected, no port activity

Green, blinkingLink detected, port activity

a

5-pin GPIO terminal block connector (TTL level)

For connecting DIO_PWR, DIO_GND, GPO0, and GPI0

b

USB 3.0 interfaces

Interfaces for reinstallation of the device software.

Not necessary for initial commissioning.

c

TP Ethernet interfaces ETH0 - ETH4

Connect the ETH0 - ETH4 TP Ethernet interfaces to additional

network components using suitable Ethernet cables.

d

Serial configuration interface RJ45 (CON)

Maintenance interface for expert configuration.

Not necessary for initial commissioning.

e

SFP interfaces ETH5 - ETH6

Connect the ETH5 - ETH6 SFP interfaces to other network

components using suitable SFP modules.

f

4-pin terminal block connector

For connecting the power supply 2x 12 – 36 V (SELV / PELV)

g

Power button (device top)

Press the power button to start up the device.

To power off the device, press the power button for 5 seconds.

h

Reset button (device top)

Short press - device restart

a

b

cd

c

e

f

a

b

e

c

d

c

d

f

e

f

Product specificaties