Lambretta Cassola Chrono Handleiding

Lambretta Horloge Cassola Chrono

Lees hieronder de 📖 handleiding in het Nederlandse voor Lambretta Cassola Chrono (2 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Features
1.Time display with Hour, Minute and Second Hands.
2. One hour Stopwatch (Chronograph) with Seconds and Minutes
Hand display
3. 24-Hour Hand.
BEFORE USING THIS WATCH
STOPWATCH HAND ADJUSTMENT
1. Refer to diagram on left. Notice the small dial on the bottom and
the small dial on the left side. These are the stopwatch hands.The
bottom dial shows elapsed seconds (0-60) and the dial on the left
shows elapsed minutes (0-60).These hands are synchronized with
each other.They must be programmed to start at the “zero” or 12
o’clock position before the stopwatch can be used.
2. Pull the crown to the “out” position. Push and hold buttons “A” and
“B” simultaneously for two seconds, then release.The stopwatch
second hand (bottom small dial) will move backwards for one half
turn and then forward for one half turn.This will electronically reset
the stopwatch mechanism.
3.With the crown still in the “outposition, push either button A or B
to position the stopwatch second hand. Button “A” will move the
hand backwards (counter-clockwise). button “B” will move the hand
forward (clockwise). Each push of the buttons will move the hand
one step – if the button is held “in” the hand will move rapidly.
4. Remember, o-the stopwatch second and minute hands are synchr
nized with each other. For each revolution of the second hand, the
minute hand will move one minute. Both hands must be positioned
at the zero or 12 o’clock position.
MINUTE HAND PUSH BUTTON “A”
HOUR HAND
Crown
STOP WATCH
MINUTE HAND
STOP WATCH
SECOND HAND
24-HOUR HAND
IN
POSITION
OUT
POSITION
PUSH BUTTON “B”
SETTING THE TIME
With the crown still in the “outposition, turn the crown to set the
hands to the desired time.We suggest moving the hands to approxi-
mately 5 minutes past the correct time then backwards to the
correct time.The 24 hour hand is permanently synchronized with the
hour/minute hands.When setting the hands, check the 24 hour dial
(on the right side of the watch see diagram).AM time is 0-12 Hours
on this dial, PM time is 13-24 hours on this dial (24:00 hours is mid-
night).After the time is set, push the crown back to the “IN” position.
USING THE STOPWATCH/ SPLIT TIME
1. Insure that the stopwatch hands have been properly adjusted
(see section “BEFORE USING THIS WATCH”, above).
2. Push the “A” button to start the stopwatch. Push “A” button
again to stop.
3. Push the “B” button and the stopwatch hands will automatically
return to the “0” or starting position.
4. For “SPLIT” time measurement – With the stopwatch running, push
button “B”.The hands will stop moving, but the watch will keep the
stopwatch time internally. Push “B” again and the hands will catch up
to the actual elapsed time.
ELECTRONIC RESET FOR STOPWATCH
If for any reason, the stopwatch behaves erratically, it can be electroni-
cally reset as follows:
1. Pull the crown to the “OUT” position.
2. Push buttons “A” and “B” simultaneously for two seconds,
then release.
3.The stopwatch second hand will move backwards for 1/2 revolution
then forward 1/2 revolution.
4. Reset the hands to “0” following the above instruction:
“Stopwatch Hand Adjustment”, steps #2 through #4.
5. Push the crown back in.
CASSOLA
MANuAL


Product specificaties

Merk: Lambretta
Categorie: Horloge
Model: Cassola Chrono

Heb je hulp nodig?

Als je hulp nodig hebt met Lambretta Cassola Chrono stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Horloge Lambretta

Handleiding Horloge

Nieuwste handleidingen voor Horloge