LaCie 526 Handleiding

LaCie Monitor 526

Lees hieronder de 📖 handleiding in het Nederlandse voor LaCie 526 (45 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/45

LaCie 500 Series LCD Monitor

User Manual page 1

Table of Contents

Safety Precautions and Maintenance 3

Health and Ergonomic Precautions 4

Environmental Regulations 5

Manufacturer’s Recycling and Energy Information 6

Monitor Speciﬁcations 7

1. Introduction to Your LaCie 500 Series LCD Monitor 8

1.1. 500 Series LCD Monitor Features 8

1.2. Box Content 9

2. Installing Your LaCie 500 Series LCD Monitor 10

3. Using Your LaCie 500 Series LCD Monitor 13

3.1. Physical Adjustments 13

3.1.1. Raise and lower monitor screen 13

3.1.2. Screen tilt 13

3.1.3. Screen rotation 14

3.1.4. Swivel 14

3.1.5. Remove monitor stand for mounting 15

3.1.6. Flexible arm installation 16

4. OSD (On-Screen Display) Control Button Functions 17

4.1. Brightness/Contrast Controls 18

4.2. Auto Adjust (Analog input only) 18

4.3. Image Controls 18

4.4. Color Control Systems 20

4.5. Tools 1 21

4.6. Menu Tools 24

4.7. Information 25

4.8. OSD Warnings 26

4.9. Advanced Menu Functions 26

4.10. Using the Auto Brightness Function 39

5. Troubleshooting 41

6. Contacting Customer Support 43

6.1. LaCie Technical Support Contacts 44

7. Warranty Information 45

LaCie 500 Series LCD Monitor

User Manual page 2

Copyrights

reserved. No part of this publication

may be reproduced, stored in a retrieval

system, or transmitted in any form or by

any means, electronic, mechanical, pho-

tocopying, recording or otherwise, with-

out the prior written consent of LaCie.

Changes

e material in this document is for

information only and subject to change

without notice. While reasonable ef-

forts have been made in the preparation

of this document to assure its accuracy,

LaCie assumes no liability resulting

from errors or omissions in this docu-

ment, or from the use of the informa-

tion contained herein. LaCie reserves

the right to make changes or revisions

in the product design or the product

manual without reservation and without

obligation to notify any person of such

revisions and changes.

FCC Declaration of Conformity:

Tested To Comply

With FCC standards

For Home of Oﬃce Use

LaCie 500 Series

LCD Monitor

NOTE: is equipment has been

tested and found to comply with the

limits for a Class B digital device, pur-

suant to Part 15 of the FCC Rules.

ese limits are designed to provide

reasonable protection against harm-

ful interference in a residential instal-

lation. is equipment generates, uses

and can radiate radio frequency energy

and, if not installed and used in accor-

dance with the instructions, may cause

harmful interference to radio commu-

nications. However, there is no guaran-

tee that interference will not occur in a

particular installation. If this equipment

does cause harmful interference to radio

or television reception, which can be de-

termined by turning the equipment oﬀ

and on, the user is encouraged to try and

correct the interference by one or more

of the following measures:

Reorient or relocate the receiving an-

tenna.

Increase the separation between the

equipment and receiver.

Connect the equipment into an out-

let on a circuit diﬀerent from that to

which the receiver is connected.

Consult the dealer or an experienced

radio/TV technician for help.

Use only shielded cables to connect

I/O devices to this equipment.

Use the attached speciﬁed cables

with the LaCie 500 Series color moni-

tor so as not to interfere with radio and

television reception.

1. e power supply cord you use must

have been approved by and comply

with the safety standards of U.S.A.

and meet the following condition.

Power supply

chord

Non shield type,

3-conductor

Length 2.0 m

Plug shape

(USA)

2. Please use the supplied shielded video

❖

signal cable, 15-pin mini D-SUB to

DVI-A cable or DVI-D to DVI-D

cable. Use of other cables and adapt-

ers may cause interference with radio

and television reception.

U.S. Responsible Party: LaCie, LTD

Address: 22985 NW Evergreen Pkwy

Hillsboro, OR 97124

Tel. No.: (503) 844-4503

Manufacturer’s Declaration for

CE Certiﬁcation

We, LaCie, solemnly declare that this

product conforms to the following Eu-

ropean standards:

EN60950-1, EN61000-3-2

EN61000-3-3, EN55024

With reference to the following condi-

tions:

73/23/EEC Low Voltage Directive

89/336/EEC EMC Directive

LaCie S.A.

33 Bld du Général Martial Valin

75015 Paris

France

❖

Forward

CAUTION: Modiﬁcations not au-

thorized by the manufacturer may void

the user’s authority to operate this de-

vice. Modiﬁcations not authorized by

the manufacturer may void the user’s

authority to operate this device.

CAUTION: A shielded-type

power cord is required in order to meet

FCC emission limits and also to pre-

vent interference to the nearby radio

and television reception. It is essential

that only the supplied power cord be

used.

LaCie 500 Series LCD Monitor

User Manual page 3

Safety Precautions and Maintenance

DO NOT OPEN THE MONI-

TOR. ere are no user serviceable

parts inside and opening or removing

covers may expose you to dangerous

shock hazards or other risks. Refer all

servicing to qualiﬁed service person-

nel.

Do not spill any liquids into the cabi-

net or use your monitor near water.

Do not insert objects of any kind into

the cabinet slots, as they may touch

dangerous voltage points, which can

be harmful or fatal or may cause elec-

tric shock, ﬁre or equipment failure.

Do not place any heavy objects on

the power cord. Damage to the cord

may cause shock or ﬁre.

Do not place this product on a slop-

ing or unstable surface, as the moni-

tor may fall, causing serious damage.

Do not place any objects onto the

monitor and do not use the monitor

outdoors.

e inside of the ﬂuorescent tube

located within the LCD monitor

contains mercury. Please follow the

bylaws or rules of

your municipality to dispose of the

tube properly.

Do not bend power cord.

Do not use monitor in high tempera-

tured, humid, dusty, or oily areas.

Do not cover vent on monitor.

Immediately unplug your monitor

from the outlet and refer servicing to

❖

qualiﬁed personnel under the following

conditions:

When the power supply cord or plug

is damaged.

If liquid has been spilled, or objects

have fallen into the monitor.

If the monitor has been exposed to

rain or water.

If the monitor has been dropped or

the cabinet damaged.

If the monitor does not operate nor-

mally by following operating instruc-

tions.

If glass is broken, handle with care.

If monitor or glass is broken, do not

come in contact with the liquid crys-

tal and handle with care.

Allow adequate ventilation around

the monitor so that heat can properly

dissipate. Do not block ventilated

openings or place the monitor near

a radiator or other heat sources. Do

not put anything on top of monitor.

e power cable connector is the pri-

mary means of detaching the system

from the power supply. e monitor

should be installed close to a power

outlet which is easily accessible.

Handle with care when transporting.

Save packaging for transporting.

Image Persistence: Please be aware

that LCD Technology may experi-

ence a phenomenon known as Image

Persistence.

❖

Image Persistence occurs when a re-

sidual or “ghost” image of a previous

image remains visible on the screen.

Unlike CRT monitors, LCD moni-

tors’ image persistence is not per-

manent, but constant images being

displayed for a long period of time

should be avoided. To alleviate im-

age persistence, turn oﬀ the monitor

for as long as the previous image was

displayed. For example, if an image

was on the monitor for one hour, the

monitor should be turned oﬀ for one

hour to erase the image.

When operating the LaCie 500 Se-

ries LCD Monitor with a 220-240V

AC power source in Europe, use the

power cord provided with the moni-

tor.

In the UK, a BS approved power cord

with a moulded plug has a Black (ﬁve

Amps) fuse installed for use with this

equipment.

If a power cord is not supplied with

this equipment please contact your

supplier.

When operating the LaCie 500 Se-

ries LCD Monitor with a 220-240V

AC power source in Australia, use the

power cord provided with the moni-

tor. If a power cord is not supplied

with this equipment please contact

your supplier.

For all other cases, use a power cord

that matches the AC voltage of the

power outlet and has been approved

by and complies with the safety stan-

dard of your particular country.

❖

Product specificaties

Merk:	LaCie
Categorie:	Monitor
Model:	526
Kleur van het product:	Zwart
Gewicht verpakking:	20500 g
In hoogte verstelbaar:	150 mm
Beeldscherm:	LCD
Beeldschermdiagonaal:	25.5 "
Resolutie:	1920 x 1200 Pixels
Touchscreen:	Nee
Kijkhoek, horizontaal:	178 °
Kijkhoek, verticaal:	178 °
Typische contrastverhouding:	800:1
Afmetingen verpakking (BxDxH):	732 x 452 x 684 mm
Frequentiebereik verticaal:	50 - 85 Hz
VGA (D-Sub)poort(en):	1
Stroomverbruik (in standby):	1 W
Certificering:	UL/cUL, TuV-GS, CE, GOST-R, FCC-B, Canadian DOC class B, MPRII, TCO 03, VESA DPMS, EPA, TuV Ergonomie, ISO 13406-2, VESA DDC2B, VESA DDC-CI
Responstijd:	16 ms
Pixel pitch:	0.287 mm
Paneelmontage-interface:	100 x 100 mm
DVI-D poorten:	1
Helderheid (typisch):	400 cd/m²
Diepte ( zonder voet ):	306 mm
Hoogte (zonder voet ):	444.2 mm
Breedte ( zonder voet ):	589.8 mm
Gewicht (zonder voet):	9700 g
Breedte apparaat (met standaard):	589.8 mm
Diepte apparaat (met standaard):	306 mm
Hoogte apparaat (met standaard):	594.2 mm
Gewicht (met standaard):	13100 g
Horizontaal draaibaar:	170 - 170 °
Grootte beeld (diagonaal):	649 mm
DVI-I poorten:	1
Stroomverbruik (typisch):	111 W