La Crosse Technology WT-3181P Handleiding

Bekijk gratis de handleiding van La Crosse Technology WT-3181P (6 pagina’s), behorend tot de categorie Klok. Deze gids werd als nuttig beoordeeld door 16 mensen en kreeg gemiddeld 4.1 sterren uit 6 reviews. Heb je een vraag over La Crosse Technology WT-3181P of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Model: WTwww.lacrossetechnology.com/support -3181 Page | 1

Model: WT- 3181

Instruction Manual

DC: 100114

18” Indoor/Outdoor Atomic Wall Clock

Get Started

Step 1: Remove the round battery cover from the back of the clock.

Step 2: Insert 1 fresh AA, LR6 1.5 volt ALKALINE battery according to

the polarity marked on the case. Replace the battery cover.

Step 2: Firmly press the time zone button once.

Step 3: Position the clock on an exterior wall that faces Ft. Collins,

Colorado. During the night, your clock will automatically set itself.

Note: The hands will move to the 12:00, 4:00 or 8:00 position and

search for the radio signal. If the radio signal received the time is

will set. If the signal is received the clock will stay at the not

12:00, 4:00 or 8:00 position and search for the WWVB time signal

on the even hours. Once the radio signal is decoded, the hands

will automatically adjust to the correct time. This may take up to 5

nights.

Step 4: The default time zone is Pacific Time. If the clocks sets itself and

the hours are off, hold the correct time zone button for 5 seconds

to correct.

Position Clock

 Choose a location 6 feet or more from electronics such as Indoor:

cordless phones, wireless gaming systems, televisions, microwaves,

routers, baby monitors, etc., which can prevent signal reception.

Position near an exterior wall that faces Ft. Collins, Colorado for

WWVB time signal reception.

Round

Battery

Cover

Product specificaties