La Crosse Technology 75903 Handleiding

Bekijk gratis de handleiding van La Crosse Technology 75903 (2 pagina’s), behorend tot de categorie Alarm ringer. Deze gids werd als nuttig beoordeeld door 20 mensen en kreeg gemiddeld 4.5 sterren uit 4 reviews. Heb je een vraag over La Crosse Technology 75903 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Page 3Page 2

For more information and support visit: http://bit.ly/75903_alarm

0.9INCH BLUE LED

ALARM CLOCK

POWER UP

1. Insert the 120 volt power cord into an outlet.

Optional: Insert 1 “9V” battery (sold separately) for backup.

2. The Time Display will flash 12:00, an indication to set the time.

TIME SETTING

Continuously hold down the TIME button while setting your

hour and minutes.

1. While holding the TIME button, press the HOUR button

to set your hour. The PM Indicator will appear when Note:

you advance to PM time.

2. While holding the TIME button, press the MINUTE button

to set your minutes.

3. When the correct time is shown on the display, release

the TIME button.

ALARM TIME SETTING & OPERATION

Continuously hold down the ALARM button while setting your

alarm hour and minutes.

1. While holding the ALARM button, press the HOUR button

to set your alarm hour. The PM Indicator will appear Note:

when you advance to PM time.

2. While holding the ALARM button, press the MINUTE button

to set your alarm minutes.

3. When the correct alarm time is shown on the display, release

the ALARM button.

4. Move the Alarm ON/OFF Switch to the ON position to turn

the alarm on. The Alarm Indicator will appear when Note:

the alarm is on.

5. To turn o a sounding alarm, move the Alarm ON/OFF Switch to

the OFF position.

S N O O ZE

When alarm sounds, press the SNOOZE button to silence alarm for

8 minutes. Snooze function can be repeated many times if desired.

BATTERY BACKUP

• Insert 1 “9V” battery (sold separately) into the Battery

Compartment on the bottom of the clock. This will keep

your time and alarm settings saved until power is restored.

• The LED display will not light-up, but the alarm will still sound

at the preset alarm time.

Note: If there is no battery installed and the power is interrupted,

the display will flash 12:00 and the time and/or alarm will need

to be set again.

JOIN THE CONVERSATION

Ask questions, watch detailed setup videos, and provide feedback

on our La Crosse Technology social media outlets!

POWER REQUIREMENTS & DIMENSIONS

Power: 120V Power Cord

Battery Backup: “9V” battery (sold separately)

Dimensions: 3.45" L x 5.50" W x 2.15" H

8.76 cm L x 13.97 cm W x 5.46 cm H

off on-

hour minutetimealarm

alarm

PM Indicator

Time Display

Alarm

ON/OFF

Switch

Alarm

Alarm Indicator

Hour

Minute Time

PM

MODEL: 75903

DC: 032321

Product specificaties