La Crosse Technology 404-89027 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology 404-89027 (2 pagina's) in de categorie Klok. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
18 INDOOR | OUT DOOR
ATOMIC WALL CLOCK
Model: 404-89027
DC: 020824
Page | 1Page | 4
WA R RA NTY IN F O
La Crosse Technology, Ltd. provides a (from date of 1-year limited time warranty
purchase) on this product relating to manufacturing defects in materials & workmanship.
La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601
For Full Warranty Details, Visit: www.lacrossetechnology.com/pages/warranty
Patents: www.lacrossetechnology.com/pages/patents
CAR E + M A I NTE NA NCE
Battery replacement instruction:
When batteries of dierent brand or type are used together, or new and old batteries
are used together, some batteries may be over-discharged due to a dierence of
voltage or capacity. This can result in venting,
leakage, and rupture and may cause personal injury.
• Always purchase the correct size and grade of battery suitable for the intended use.
• Always replace the whole set of batteries at one time, taking care not to mix old and
new ones, or batteries of dierent types.
• Clean the battery contacts and those of the device prior to battery installation.
• Ensure the batteries are installed correctly with regard to polarity (+ and -).
• Remove batteries from product during periods of non-use. Battery leakage can cause
corrosion and damage to this product.
• Remove used batteries promptly.
• For recycling and disposal of batteries, and to protect the environment please check
the internet or your local phone directory for local recycling centers and / or follow
local government regulations.
WARNING: This product can expose you to chemicals including
acrylonitrile, 1, 3-butadiene, and styrene, which are known to the State
of California to cause cancer and birth defects or other reproductive
harm. For more information go to: www.P65Warnings.ca.gov
STAY IN TOUCH!
Ask questions, watch set up videos, and provide feedback on our social
media outlets. Follow La Crosse Technology on Youtube, Facebook,
Instagram, and X (Twitter).
P O W E R U P
1. Remove the round Battery Cover and insert one AA battery into the
movement and into each Side Battery Compartment.
IMPORTANT: Be sure all batteries have the same voltage and are
installed according to polarity.
2. The hands will move to the 4, 8, or 12 o’clock position and stay there
while it searches for the WWVB Atomic Time Signal. Allow up to 5
nights for the clock to receive this transmission.
3. For the best reception, place the clock on an exterior wall near a
window with the front or back of it facing Fort Collins, CO.
4. Once the Atomic Time Signal is received, the clock will set to Pacific
Time. Firmly press and hold your correct Time Zone Button until the
hands begin to spin. The time will then set correctly.
5. If you live in an area that does not follow Daylight Saving Time, while
the hands are spinning to the correct time, press the Daylight Saving
Time Button once to turn the DST setting to OFF.
Watch the setup video: bit.ly/wallclock_setup
Note: In certain areas, this clock may not be able to receive the WWVB
reception due to signal strength or interference. In this case, your clock can
be set manually until the Atomic Time Signal can be received.
For information about WWVB, Atomic Time Signal visit: bit.ly/atomic_time
Manual Set Tab
Time Zone Buttons
Daylight Saving Time Button
(Default is DST ON)
1. Remove all batteries from the clock.
2. Press the Manual Set Tab at least 20 times and wait 15 minutes.
3. Insert batteries into the Side Battery Compartments.
4. Allow the hands to spin around and stop in either the 4, 8, or 12 o’clock
position.
5. Hold the Manual Set Tab until your correct time is achieved.
Note: The Atomic Time Signal will override your manual setting if the
transmission is received in the future.
4
3
2
1
M A N UA L LY S E T T I M E
Page | 3Page | 2
Side Battery Compartments
• Your thermometer and hygrometer have been pre-calibrated and
should not need adjustment.
• Before manually adjusting your sensors, allow the clock to sit for at
least 2 hours in the same location.
• To manually adjust your sensors, gently turn the temperature or
humidity sensor adjustment on the back of the clock until desired
setting is reached.
PT
PT
PT
PT
PT MT
MT
MT
MT
MT CT
CT
CT
CT
CT ET
ET
ET
ET
ET
AA
AA
+
+
+
+
+ +
+
+
+
+
-
-
-
-
- -
-
-
-
-
4
3
2
1
Movement
4
Atomic Time Zones: Pacific, Mountain, Central, Eastern
Temperature Range: -20°F to 120°F
Humidity Range: 1% to 99% RH
Power Requirements: 1 “AA” Alkaline Battery (Not Included)
Extended Battery: 2 Optional “AA” Alkaline Batteries (Not Included)
Battery Life: 12+ Months (1 Battery)
Extended Battery Life: 5 Years (3 Batteries)
Dimensions: 18-inch (45.7 cm) Diameter 2.6-inch (6.6 cm) Depth
S P E C I F I C AT I O N S
THERMOMETER/HYGROMETER


Product specificaties

Merk: La Crosse Technology
Categorie: Klok
Model: 404-89027

Heb je hulp nodig?

Als je hulp nodig hebt met La Crosse Technology 404-89027 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Klok La Crosse Technology

Handleiding Klok

Nieuwste handleidingen voor Klok