Ksenia Ergo Handleiding

Ksenia Beveiliging Ergo

Lees hieronder de 📖 handleiding in het Nederlandse voor Ksenia Ergo (10 pagina's) in de categorie Beveiliging. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10

KSI2100000.300

MULTIFUNCTION LCD KEYPAD

QUICK INSTALLATION AND PROGRAMMING GUIDE

INTRODUCTION

ergo is a very advanced LCD Keypad carefully developed with the objective to capture a modern,

minimalist and discreet style and an extremely slim prole ( less than ½ inch.), which allows it to be

positioned in any interior architecture thus expressing a new feeling of design, prestige and innovation.

Thanks to the “Capacitive Sensing” Technology, here you won’t see any of the ugly mechanical parts

(like as membranes, buttons, plastic cover, etc.) which are typically available in other products and

that are often the ideal dust location and the source of bad contacts. In the case of ergo the front is

completely smooth and all desired functions can be implemented by simply touching upon the surface

in the areas shown by the graphic (letters, symbols, circular-scroll mouse) in a very simple and rational

manner. All available functions, as detailed below, are really many and surprising.

It can be customized in the 4 different Ksenia institutional colors (White, Black, Red and metallized Grey),

simply by removing the transparent cover and interchanging the internal cover (Lexan) with one of

those included in the package envelope, such operation is meant to be so easy and safe that can be

done by the end-user at anytime and without risks.

Moreover, with no need of additional parts, it can be “ush-mounted” taking advantage of any std.

box Din 503, or just as it is on any wall (with no need of additional parts) or if desired even the desk-

solution can be chosen thanks to the included stylish sustainer parts.

The ergo keypad has been conceived to be linked both to Universal GSM/GPRS Communicator

geminoTM and Ksenia intrusion control panel lares, since, differently to any other similar devices, it

works also as “programming unit” , making the installer’s life much easier by avoiding the need of

having a PC with for the Communicator or the Intrusion Control Panel programming (see gure below).

As a matter of fact, all gemino’s and lares’s programming and managing functions (whether working

at stand-alone or not) can be executed directly from the ergo Keypad. Therefore ergo is in a position

to program the entire system or just to modify specic data at any time of the system life, such as,

for example, phone numbers, email addresses, SMSs, etc. (The programming cable with connectors is

available as optional).

TECHNICAL DATA

• LCD Display 16x2 (visible area 61 x 16mm)

• “Capacitive Sensing” Technology (no mechanical press-buttons)

• Circular Scroll : quick menu access

• Available in 4 different colors

• RFID/ NFC Proximity Reader

• Integrated Microphone and Speaker for recording and remote listening

• “Fast Addressing System”: no need to pre-set the device address (automatic recognition

from the Control Panel/GSM Communicator)

• Power supply: 13,8Vdc

• Consumption: 15mA standby, 400mA max

• Nr. 2 programmable terminals as inputs (e.g. for zones, contacts), or as Open Collector

outputs (500mA max.)

• 1 supply output for external devices (0,5 A max)

• Plug & Play BUS for Supply & Communication purposes

• RFID/NFC 13.56 MHz (max. distance 2 cm.)

• Operating temperature range: 5 - 40°C

• Overall Dimensions: 105 x 145 x 25 mm

• Weight: 180 gr

FUNCTIONS

• Display of system status

• Display of functioning parameters ( date/time, active GSM network, GSM level, etc)

• System commands (complete or partial arming, reset, activation of outputs terminals, phone calls,

etc.)

• Full Programming of system parameters

• Programming of local parameters (audio volume, backlight levels)

• KP functionality exclusion for front cleaning purposes

• Remote Listening

• Vocal messages recording

• RFID/NFC Tag reading to arm and disarm the intrusion detection systems set up with the lares

devices.

OPTIONALS

KSI7500000.000 / KIT 1,5 m. cable for GSM/GPRS programming

KSI2100001.300 / Table sustainer

KSI2100002.300 / KIT ergo keypad

INSTALLATION

BUILT-IN INSTALLATION (WITH DIN 503 BOX) OR DIRECTLY ON THE WALL

INSTALLATION WITH TABLE SUSTAINER

The keypad ergo can be installed directly on a wall or put in an DIN 503 box set in the wall or leant on a

plain surface by means of the proper sustainer.

1. Push the cable through to the proper opening.

2. Fix the keypad base to the DIN 503 box with the supplied screws opening the proper eyelets. To x

the keypad base directly to a wall, use proper plugs (not supplied) through the proper eyelets.

3. Connect the cables to the terminals on the rear of the keypad.

4. Fit in the PCBA on the left side of the keypad base, keeping the display in the front and the clamps

on the back, then press the right side until a double-click is heard.

5. Insert a coloured Lexan at choice into the cover.

6. Close the cover properly.

1. Install, with a light pressure, the part 1 of the table sustainer on the back of the keypad base.

2. Fit in the part 2 of the sustainer on the part 1 by the mean of the proper hinge.

3. Push the cable through to the proper opening.

4. Connect the cables to the terminals on the rear of the keypad.

5. Fit in the PCBA on the left side of the keypad base, keeping the display in the front and the clamps

on the back, then press the right side until a double-click is heard.

6. Insert a coloured Lexan at choice into the cover.

7. Close the cover properly.

8. Use the optional cable for the programming of the communicator GSM/GPRS gemino.

Product specificaties

Merk:	Ksenia
Categorie:	Beveiliging
Model:	Ergo

Heb je hulp nodig?

Als je hulp nodig hebt met Ksenia Ergo stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Beveiliging Ksenia

Ksenia Network Camera Cube Handleiding

12 Augustus 2023

Ksenia Ergo Handleiding

12 Augustus 2023

Handleiding Beveiliging

Nieuwste handleidingen voor Beveiliging

Geemarc SOS-PRO 295 Handleiding

6 Maart 2024

One2track Safety Angel Handleiding

16 Oktober 2023

Sygonix SY-3851632 Handleiding

16 Oktober 2023

Sygonix 1326052 Handleiding

16 Oktober 2023

Sygonix 43588A WLAN Camera Handleiding

16 Oktober 2023

Sygonix 43176S LAN Camera Handleiding

16 Oktober 2023

Sygonix SY-3181234 Handleiding

16 Oktober 2023

Sygonix Touch IP65 Handleiding

16 Oktober 2023

Sygonix 1882082 Handleiding

16 Oktober 2023

Sygonix SY-3822408 Handleiding

16 Oktober 2023