Kreg Shelf Pin Jig Handleiding

Kreg Boormachine Shelf Pin Jig

Lees hieronder de 📖 handleiding in het Nederlandse voor Kreg Shelf Pin Jig (72 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/72
English 2
French (N. America) 13
Spanish (N. America) 25
French 37
Spanish 49
German 61
O W N E R ’ S M A N U A L
We’re here to help.
We want you to have an exceptional project building experience.
If you have questions or need support, please get in touch.
1-800-447-8638 technicalsupport@kregtool.com |
Tell us about your experience.
Your opinion counts. And we’re always looking for ways to
improve. Share your feedback so we can keep growing and
innovating for you. www.kregtool.com/feedback
WARNING Every user must read and follow instructions and safety
precautions in this manual. Failure to do so could result in serious injury.
Save manual for future reference.
Kreg Shelf Pin Jig
Manual applies to Item # KMA3225, KMA3232, and KMA3232-INT
2
Safety Precautions
WARNING Before using a power tool with this product, read, and follow the
tool manufacturer’s instructions and safety precautions in addition to the safety
precautions below to reduce risk of serious injury from hazards such as re, electric
shock, or rotating drill bit.
■Follow your drill manufacturer’s safety guidelines.
■Follow your clamp manufacturer’s safety guidelines. Keep your hands clear when
clamping to avoid pinch points. The clamping limit on this jig is 300 lbs.
â– When drilling, always ensure that the workpiece is clamped securely. It is
dangerous to hold the workpiece in place by hand.
â– The drill bit is sharp; handle with care and avoid unintended cutting. The drill bit
may be hot after repetitive use.
■Always wear personal protective equipment certied as adequate in addition to
what your drill manufacturer requires.
â– Do not allow familiarity gained from frequent use of your tools to replace safe work
practices. A moment of carelessness is sufcient to cause severe injury.
WARNING Avoid awkward hand positions where a sudden slip could cause contact
with the rotating drill bit.
WARNING Do not operate this tool or any machinery while under the inuence of
drugs, alcohol, or medications.
WARNING This product can expose you to chemicals including Acrylonitrile and
other chemicals, which are known to the State of California to cause cancer and
reproductive harm. For more information go to www.P65Warnings.ca.gov.
WARNING Drilling, sawing, sanding, or machining wood products can expose you
to wood dust, a substance known to the State of California to cause cancer. Avoid
inhaling wood dust or use a dust mask or other safeguards for personal protection.
For more information go to www.P65Warnings.ca.gov/wood.
Table of Contents
Safety Precautions 2 . . . . . . . . . .
Pre-Assembly 3. . . . . . . . . . . . .
Assembly 4 . . . . . . . . . . . . . . .
Face-Framed Cabinets 5. . . . . . . .
Frameless Cabinets . . . . . . . . . 6
Operation 8 . . . . . . . . . . . . . . .
Using the Jig for Cabinet Hardware
Installation . . . . . . . . . . . . . . 9
Connect Jigs Together . . . . . . . .11
Maintenance . . . . . . . . . . . . .11
Care and Cleaning . . . . . . . . . .11
Troubleshooting . . . . . . . . . . .11
Accessories 11. . . . . . . . . . . . . .
3
Pre-Assembly
Review this section before you begin. Ensure you have all tools/materials on hand and
compare the package with the items listed in the Product Description section. If any
item appears missing or lost, do not use this product. Contact Technical Support or
return product to place of purchase.
Recommended Tools/Materials
Clamp Pencil
Product Description
F
B
A
C
DE
G
H
Part Description Part Description
A Shelf Pin Jig E** Indexing pin
B Fence F Jig extension
C* Drill bit G Hex wrench
D Stop collar with set screw H 1/4" or 5 mm Shelf pins (4x)
*If replacement or different size drill bits are needed, 1/4" or 5 mm drill bits are available
separately.
**The indexing pin is double ended for both 1/4" and 5 mm shelf pin holes.


Product specificaties

Merk: Kreg
Categorie: Boormachine
Model: Shelf Pin Jig

Heb je hulp nodig?

Als je hulp nodig hebt met Kreg Shelf Pin Jig stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Boormachine Kreg

Handleiding Boormachine

Nieuwste handleidingen voor Boormachine