Kramer KT-107-INWL Handleiding

Kramer Niet gecategoriseerd KT-107-INWL

Bekijk gratis de handleiding van Kramer KT-107-INWL (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 4.3 sterren uit 9 reviews. Heb je een vraag over Kramer KT-107-INWL of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/4

KT- -INWL 107 Quick Start

P/N:

2 9 0 0 - 3 0 1 1 5 1 QS

Rev:

Scan for full manual

KT- -INWL Quick Start Guide 107

This guide helps you install and use your KT-107-INWL for the rst time.

Go to www.kramerav.com/downloads/KT- -INWL107 to download the latest manual and check for updates.

Step 1: Check what’s in the box

KT- -INWL 107 enclosure

4 4x1/2” screws for wood (packed separately)

Outer frame

1 utCardboard c -out template

4 Inner frame M3x8 screws (packed separately

Inner frame

1 Quick start guide

Step 2: Get to know your - -INWL KT 107

The -Wall Kit secures , and Touch Panels safely into a wall (drywall, wood, or KT- -INWL107 In KT-107 -107RB KT -107SKT

concrete).

Step 3: Prepare the surface for installation

For drywall and wooden surfaces:

1. Place the cut-out template (included, use

for drywall and wood installations) over the

surface exactly where you want to install

KT- -INWL107 .

2. Mark the edge inside

(W, H: 19.5cm x 15cm) of the template and

cut an opening in the surface according to

the given dimensions.

Kramer is not responsible for any

damage caused to the surface.

For concrete or block wall surfaces:

Use the Kramer -wall box KT-107-INWB in

(purchased separately) for concrete

installations.

1. Make sure that the prepared opening in

the concrete ts the dimensions of the in-

wall junction box.

2. Insert the into the opening. KT- -INWB107

Make sure to place the ush KT-107-INWB

with the plaster surface.

Step 4: Mount the - -INWL enclosure KT 107

For each surface type you need to use dierent screws to mount the enclosure. KT-107-INWL

For drywall surfaces:

1. Insert the enclosure into the KT- -INWL107

opening.

2. Slightly release the 4 drywall screws until you

notice (via the openings next to the drywall

screws) that the drywall anchor turns

outwards.

3. Tighten the screws to x the enclosure in

place.

Rear view of drywall screw anchor in the vertical position and tightened,

in the horizontal position:

For wooden surfaces:

▪ Insert the 4 wood screws 4x1/2”

(supplied) through the wood screw-

openings and tighten to the wooden

surface.

For concrete surfaces:

1. Place the enclosure inside the KT- -INWL107

junction box opening.

2. Insert the 4 concrete screws (supplied with

KT KT- -INWB107 ) through the - -INWL107

enclosure concrete screw-openings and the

screw openings of the junction box, and

tighten.

Step 5: Prepare the Touch Panel for installation

Before attaching the touch panel to the enclosure, you need to attach the panel-mount plate to the rear side of KT- -INWL107

the Touch Panel and then to the on-wall mount.

The -mount plate and the on-wall mount are supplied with the Touch Panel. panel

To prepare the touch panel for installation:

1. Insert the cables through the openings of the

Touch-Panel on-wall mount (for example, a

USB cable to connect to an external device).

2. On the rear side of the Touch Panel, unscrew

the cover and set the cover and screw aside.

3. Attach the panel mount plate onto the rear

side of the Touch Panel using the 4 M2x4

screws (supplied with the Touch Panel) and

tighten.

4. Connect the at cable

between the on-wall mount

and the Touch Panel.

Product specificaties

Merk:	Kramer
Categorie:	Niet gecategoriseerd
Model:	KT-107-INWL
Kleur van het product:	Zwart
Gewicht:	600 g
Breedte:	225 mm
Diepte:	177 mm
Hoogte:	42 mm
Gewicht verpakking:	800 g
Breedte verpakking:	344 mm
Diepte verpakking:	210 mm
Hoogte verpakking:	68 mm
Montage gereedschap:	Ja
Montagewijze:	Muur
Maximale gewichtscapaciteit:	- kg
Certificering:	CE, WEEE
Duurzaamheidscertificaten:	RoHS
Montage interface compatibiliteit (min):	- mm
Montage interface compatibiliteit (max):	- mm
Aantal displays ondersteund:	1
Maximale schermgrootte:	7 "
Minimale schermgrootte:	7 "