Korg ESX-1SD Handleiding

Korg Hifi systeem ESX-1SD

Lees hieronder de 📖 handleiding in het Nederlandse voor Korg ESX-1SD (14 pagina's) in de categorie Hifi systeem. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14
2
GFE
About ELECTRIBE·SX-SD
Please read this booklet as well as the ELECTRIBE·SX Owner’s Manual for information on using
the new ELECTRIBE·SX-SD.
This booklet describes features that are new or modified relative to those from the ELECTRIBE·SX.
Please refer to the supplied Owner’s Manual for reference pages and the corresponding contents.
Veuillez lire ce fascicule en plus du Manuel de l’utilisateur de l’ELECTRIBE·SX pour savoir
comment utiliser votre ELECTRIBE·SX-SD.
Ce fascicule décrit les nouveautés ou les changements de cet instrument par rapport à
l’ELECTRIBE·SX. Veuillez lire le Manuel de l’utilisateur fourni et notamment les parties auxquelles
renvoient les pages de référence.
Dieses Heft stellt daher eine Ergänzung zur ELECTRIBE·SX Bedienungsanleitung dar, wo die
übrigen Funktionen der ELECTRIBE·SX-SD vorgestellt werden.
In diesem Heft werden nur Funktionen erwähnt, die hinzugefügt bzw. gegenüber der ELECTRIBE·
SX geändert wurden. Die erwähnten Seitenverweise beziehen sich auf die Bedienungsanleitung, in
der Sie weitere Informationen finden.
2
To ELECTRIBESX-SD Users
Thank you for purchasing the Korg ELECTRIBE∙SX-SD Music
Production Sampler.
This product features the same basic functionality as the
ELECTRIBE∙SX, but supports an SD card.
Please read this booklet as well as the ELECTRIBE∙SX Owner’s
Manual for information on using the new ELECTRIBE∙SX-SD.
This booklet describes features that are new or modied relative to
those from the ELECTRIBE∙SX. Please refer to the supplied Own-
ers Manual for reference pages and the corresponding contents.
Supporting an SD card
The ELECTRIBE∙SX-SD uses an SD card, instead of SmartMe-
dia, to save internal data.
Before using an SD card on the ELECTRIBE∙SX-SD, please note
the following:
In the sections describing SmartMedia™ in the Owner’s Man-
ual, please replace “SmartMedia™” instances with “SD card.
Please replace the “Using SmartMedia™” section on page 84
with the following section.
Using an SD card
You can use an SD card to save or load ELECTRIBE∙SX-SD in-
ternal data.
You can also load samples (WAVE and AIFF les) created on a
personal computer into the ELECTRIBE∙SX-SD.
An SD card is not supplied in the package. Please purchase
one separately.
The ELECTRIBE∙SX-SD supports SD cards of up to 2GB
capacity and SDHC cards of up to 32GB capacity.
The ELECTRIBE∙SX-SD can handle up to 256 les in total.
The unit will not recognize any les that exceed the 256 le
limit.
The ELECTRIBE∙SX-SD may take time to recognize or write
les on large capacity cards.
About SD card write-protection
To prevent data saved on an SD card from being erased or over-
written accidentally, set the write-protect switch to the “protect”
position. If the card is write-protected, you will not be able to write
to or erase data from the card, or format the card.
If you want to save data to the card, you must move the switch
back to the original position.
Write-protect
switch
Protect
Handling an SD card
Please read the instruction manual that came with the SD card.
Inserting an SD card
Make sure that the SD card is oriented in the correct direction,
and then insert it all the way into the card slot until it clicks into
place.
Removing the SD card
Push the card in lightly once until it clicks. The card will then eject
itself.
Before using an SD card for the rst time, format the card
on the ELECTRIBE∙SX-SD. If the card has been formatted
by another device, the card may not be recognized by the
ELECTRIBE∙SX-SD, or the unit may be unable to access
the function parameters. Alternatively, the unit may display
a message indicating that you must format the card.
Never remove the card or turn off the power to the unit while
the SD card is being accessed (i.e., while the card indicator
is lit). Otherwise, the card may be damaged.
* In the part describing SmartMedia on pages starting from
page 85 in the Owner’s Manual, please replace SmartMedia™”
instances with “SD card.
For cautions and information regarding the SD card write-protect
function, please refer to theAbout SD card write-protectionsec-
tion in this booklet.
New patterns and samples
The Pattern name list on page 100 has been changed.
Refer to page 10 of this booklet for the updated list.
The Sample name list on page 101 has been changed.
Refer to page 12 of this booklet for the updated list.
The Demo Song List on page 18 has been changed.
Refer to page 12 of this booklet for the updated list.
New AC power adapter
The AC/AC power supply has been replaced with an AC adapter.
Due to this change, the AC 9V jack on the rear panel has been
modied. Please refer to the following illustration for the location
of the power adapter jack and the power switch, instead of the
gure on page 14.
AC adapter jack
Power switch
Power supply: DC12V (included AC adapter)
Power consumption: 15.2W
About the vacuum tubes
Immediately after you turn on the power to the unit, the vacuum
tube may glow momentarily. This is a phenomenon typical of vac-
uum tubes, and not an abnormality.
3
Aux utilisateurs d’un ELECTRIBESX-SD
Nous vous remercions d’avoir choisi le Music Production Sam-
pler de Korg ELECTRIBE∙SX-SD.
Ce produit est semblable à l’ELECTRIBE∙SX mais peut être
utilisé avec une carte SD.
Veuillez lire ce fascicule en plus du Manuel de l’utilisateur
de l’ELECTRIBE∙SX pour savoir comment utiliser votre
ELECTRIBE∙SX-SD.
Ce fascicule décrit les nouveaus ou les changements de cet
instrument par rapport à l’ELECTRIBE∙SX. Veuillez lire le Ma-
nuel de l’utilisateur fourni et notamment les parties auxquelles
renvoient les pages de référence.
Compatibilité avec les cartes SD
LELECTRIBE∙SX-SD se sert de cartes SD au lieu de SmartMe-
dia™ pour sauvegarder des données internes.
Avant d’utiliser une carte SD avec lELECTRIBE∙SX-SD, notez
les points suivants:
Dans les sections consacrées à la carte SmartMediadu le
Manuel de l’utilisateur, veuillez remplacer “carte SmartMe-
dia™” par “carte SD.
Veuillez remplacer la sectionUtilisation d’une carte Smart-
Media™” à la page 76 par la section suivante.
Utilisation d’une carte SD
Vous pouvez utiliser une carte SD pour sauvegarder ou charger
des données internes de l’ELECTRIBE∙SX-SD.
Vous pouvez aussi charger ainsi des échantillons (chiers WAVE
et AIFF) créés sur ordinateur dans l’ELECTRIBE∙SX-SD.
Aucune carte SD n’est fournie. Veuillez l’acquérir sépa-
ment.
LELECTRIBE∙SX-SD accepte les cartes SD d’une capac-
ité allant jusqu’à 2GB et les cartes SDHC d’une capacité
allant jusqu’à 32GB.
LELECTRIBE∙SX-SD peut gérer jusqu’à 256 chiers. Il ne
reconnaît pas les chiers dépassant cette limite de 256
chiers.
LELECTRIBE∙SX-SD peut mettre un certain temps pour
reconnaître ou sauvegarder des chiers sur des cartes de
grande capacité.
Protection contre l’écriture d’une carte SD
Pour éviter que des données sauvegardées sur carte SD ne
soient effacées ou remplacées accidentellement, réglez le com-
mutateur de protection de la carte en position “Protection”. Tant
que la carte est protégée, vous ne pouvez ni sauvegarder des
données sur la carte ni en effacer. Vous ne pouvez pas non plus
formater la carte.
Pour sauvegarder des données sur la carte, ramenez le commu-
tateur dans sa position originale (pas de protection).
Commutateur de
protection contre
l’écriture
Protection
Maniement des cartes SD
Veuillez lire le mode d’emploi accompagnant la carte SD.
Insertion d’une carte SD
Vériez que la carte SD est orientée dans le bon sens puis
insérez-la à fond dans la fente pour carte jusqu’à ce qu’un déclic
indique qu’elle est en place.
Extraction d’une carte SD
Appuyez légèrement sur la carte jusqu’au déclic. La carte
s’éjecte d’elle-même.
Avant d’utiliser une carte SD pour la première fois,
formatez-la sur l’ELECTRIBE∙SX-SD. Si la carte a été
formatée sur un autre dispositif, elle risque de ne pas être
reconnue par l’ELECTRIBE∙SX-SD ou certains paramètres
risquent d’être inaccessibles. Un message peut également
apparaître vous invitant à formater la carte.
N’extrayez jamais la carte SD et ne coupez jamais
l’alimentation tant qu’un acs à la carte est en cours
(tant que le témoin de la carte est allu). Cela risque
d’endommager la carte.
* Dans les sections consacrées à la carte SmartMediaà partir
de la page 76 dans le Manuel de l’utilisateur, veuillez remplacer
“carte SmartMedia™” par “carte SD”.
Pour en savoir plus sur les précautions et les informations
relatives à la protection de la carte SD contre l’écriture, veuillez
lire la section “Protection contre l’écriture d’une carte SD” dans
ce fascicule.
Nouveaux motifs et échantillons
La liste des noms de motifs de la page 100 a été modiée.
Vous trouverez la nouvelle liste à la page 10 de ce fascicule.
La liste des noms d’échantillons de la page 101 a été modi-
ée.
Vous trouverez la nouvelle liste à la page 12 de ce fascicule.
La liste des morceaux de démonstration de la page 18 a été
modiée.
Vous trouverez la nouvelle liste à la page 12 de ce fascicule.
Nouvel adaptateur secteur
Lalimentation CA/CA a été remplacée par un adaptateur sec-
teur. La prise CA 9V en face arrre a donc été modiée. Voyez
l’illustration suivante pour savoir où se trouvent la prise de
l’adaptateur secteur et l’interrupteur d’alimentation au lieu de
celle gurant à la page 14.
Prise pour adaptateur secteur
Interrupteur
Alimentation électrique: DC12V (adaptateur secteur inclus)
Consommation électrique: 15,2 W


Product specificaties

Merk: Korg
Categorie: Hifi systeem
Model: ESX-1SD

Heb je hulp nodig?

Als je hulp nodig hebt met Korg ESX-1SD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Hifi systeem Korg

Handleiding Hifi systeem

Nieuwste handleidingen voor Hifi systeem