Kopul PDI-40 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Kopul PDI-40 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Thank you for choosing Kopul.
The Kopul PDI-40 High-Performance Passive Direct Box lets you connect
your unbalanced, high-impedance signal to a balanced, low-impedance
input. It is most often used for plugging an electric keyboard, guitar, or
bass guitar directly into a mixing console’s microphone-level input. The
PDI-40 can also be used in DJ applications for converting +10 dB DJ
mixer signals to balanced, line-level signals to facilitate longer cable runs
and to interface with mixing consoles.
The PDI-40 features a parallel output to connect to an amplier, an
attenuation switch to lower the signal input by -20 or -40 dB, and a
ground-lift button to minimize hum noise or ground loops.
Pro Audio Solutions
High-Performance
Passive Direct Box
PDI-40
Three-Year Limited Warranty
This Kopul product is warranted to the original purchaser to be free from defects in
materials and workmanship under normal consumer use for a period of three (3)
years from the original purchase date or thirty (30) days after replacement,
whichever occurs later. The warranty provider’s responsibility with respect to this
limited warranty shall be limited solely to repair or replacement, at the provider’s
discretion, of any product that fails during normal use of this product in its
intended manner and in its intended environment. Inoperability of the product or
part(s) shall be determined by the warranty provider. If the product has been
discontinued, the warranty provider reserves the right to replace it with a model of
equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT AS
PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY
EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. This warranty provides you with specic legal rights,
and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Kopul Customer Service Department to
obtain a return merchandise authorization (“RMA”) number, and return the
defective product to Kopul along with the RMA number and proof of purchase.
Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.kopulcables.com or call
Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Kopul is a registered trademark of the Gradus Group.
© 2016 Gradus Group LLC. All Rights Reserved.
KOPUL
A Gradus Group Brand
TM
GG3
Setting Up
1. Connect the output of your unbalanced source signal to the
PDI-40’s input. If you are using effects, insert them between
the source signal and the PDI-40, so you can monitor the
effects via both the amplier and the mixing console.
2. Set the attenuation switch to -20 dB. You can adjust this
later if necessary.
3. Connect your amplier’s input to the PDI-40’s para out.
4. Connect the microphone-level input of your mixing console
to the PDI-40’s balanced output.
If the source signal is too high or low, adjust the attenuation switch
as needed.
If you are experiencing buzzing or humming noises, press the
ground-lift button.
PDI-40 Pa s s ive Pro Direc t Box
In
Out
Sound Card
Parallel Out
Precautions
Please read and follow these instructions and keep this manual in a safe place.
Exposure to high sound levels can cause permanent hearing loss. Avoid listening at
high volumes for extended periods of time.
Keep this product away from water and any ammable gases or liquids.
Clean this product with only a soft, dry cloth.
Keep this product away from children.
Use only parts provided by the manufacturer.
All photos are for illustrative purposes only.
Specications
Input
Para Out
Balanced output
Attenuation switch
Dimensions
Weight
1/4
1/4
XLR
0, -20, -40 dB
4.7 × 3.0 × 1.7 in.
(12 × 7.6 × 4.2 cm)
15 oz. (425 g)
1. Input
2. Para Out
3. Attenuation switch
4. Balanced output
5. Ground-lift button
The input for your unbalanced, high-impedance
signal source.
Wired in parallel to the input, so you can output the
signal source through to an amplier. The signal
remains unchanged and is routed directly to the
amplier.
Attenuates the input by -20 or -40 dB.
The balanced, low-impedance output connects to
the mixing console’s microphone-level input.
Fully separates the input and output grounding to
minimize hum noise or ground loops. When the
button is pressed, the ground connection is
interrupted.
Overview
GROUND
ON | OFF
INPUT
50K Ω
PARA OUT
50K Ω
ATT
-0dB | -20dB | -40dB
BALANCED IN/OUT
600 Ω
1
4
5
2
3


Product specificaties

Merk: Kopul
Categorie: Niet gecategoriseerd
Model: PDI-40

Heb je hulp nodig?

Als je hulp nodig hebt met Kopul PDI-40 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Kopul

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd