Konig KN-TTUSB100 Handleiding

Konig Audio/video-converter KN-TTUSB100

Lees hieronder de 📖 handleiding in het Nederlandse voor Konig KN-TTUSB100 (56 pagina's) in de categorie Audio/video-converter. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/56

USB ADAPTÉR PRO

AUDIO/PHONO

AUDIO/PHONO USB-SOVITIN

ADAPTADOR USB DE

AUDIO/MICRÓFONO

AUDIO USB-OMZETTER

AUDIO/PHONO-USB-ADAPTER

CONVERTOR AUDIO/

PHONO CU USB

AUDIO/PHONO

USB-OMVANDLARE

AUDIO/PHONO ADAPTER, USB

ADATTATORE USB AUDIO/PHONO

ADAPTATEUR AUDIO/PHONO USB

AUDIO/PHONO USB ADAPTER

KN-TTUSB100

ENGLISH

Introduction:

The KN-TTUSB100 is an ultra compact bidirectional USB/AUDIO adapter.

Convert your vinyl, CDs, audio cassettes or any other analogue audio source to MP3 or

WAV on your PC. Switchable audio input: line or phono and it can be used as PC-sound

card: USB/audio line output.

Features:

• RIAA pre-amplifier circuit for PHONO IN

• Line in / Pre-Amp out switch

• MM/MC selection for different phonograph cartridges

• Compatible with Windows® or Mac® OS default drivers

• USB bus powered

• Audio sampling rates can be set up to 48 KHz for 2 channel recording

• Compatible with Windows® 2000/XP/Vista and Mac® OSX

System Requirements:

Turntable

Phonograph disk

Computer with USB ports and 500 mA powering capacity

Recording software

Connections:

1) USB mini 5pin Out connection

2) Switch (Line in - Pre-Amp Out)

3) 3.5mm jack connection

4) MM/MC switch

5) Phono in (2xRCA)

6) Grounding

7) LED indication.

Application:

• Convert analogue music on phonographic disk to digital format.

Follow the description to record music from a vinyl record.

Pre-Amp

Out Line

USB

Front

BACK

Phono In

Phonograph player

MM MC

A. Connect the R,L R,L cable to the →

turntable and USB preamplifier.

B. In order to prevent a HUM noise caused

by mismatching of the turntable and

USB preamplifier, it is recommended that

the user connects the grounding cable

between the 2 devices.

C. Connect the USB cable to the PC (or

notebook) and USB Pre-Amp as the

illustration shows.

When the USB connection is ok, the PC

will auto-detect this unit as “USB

PREAMP”. You can then start to use this

device on your computer

Operation:

A. Connect the turntable to the USB preamplifier

B. Play the vinyl record

C. Select the MM/MC position for the different types of pickup heads for turntables

D. Now you can start recording with your audio grabbing software on a PC /notebook

• PHONO preamplifier (Stand Alone or operated with PC at the same time):

Pre-Amp

Out

Line

USB

Front

BACK

Phono In

Phonograph player

MM MC

Amplifier

A. Connect the audio cable R,L R,L to →

the turntable and USB Pre-Amp.

B. In order to prevent a HUM noise caused

by mismatching of the turntable and

USB preamplifier, it is recommended that

the user connects the grounding cable

between the 2 devices.

C. Get the USB mini USB cable and →

connect your PC and the USB Pre-Amp.

Please make sure the connection is

good because the USB preamplifier is

powered via the USB port.

D. Connect the 3.5mm Audio R, L cable, →

and connect the “Line In/Pre-Amp Out”

port and the Audio R,L end to your stereo

amplifier.

E. Set the slide on the USB preamplifier to the “Pre-Amp Out” position

Product specificaties

Merk:	Konig
Categorie:	Audio/video-converter
Model:	KN-TTUSB100
Kleur van het product:	Zwart, zilver
Gewicht verpakking:	282 g
Breedte verpakking:	135 mm
Diepte verpakking:	135 mm
Hoogte verpakking:	45 mm
USB-connectortype:	Mini-USB B
Audio-ingang (L, R):	2
Compatibele besturingssystemen:	Microsoft Windows 98/ME/2000/XP/Vista/7,\r\nMac OS 2.1/10.2/10.4
Externe adapter:	Nee