Konig KN-LED60 Handleiding
Konig
Overige camera toebehoren
KN-LED60
Lees hieronder de 📖 handleiding in het Nederlandse voor Konig KN-LED60 (59 pagina's) in de categorie Overige camera toebehoren. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/59
KN-LED60
MANUAL (p. 2)
LED Light
ANLEITUNG (S. 6)
LED-Leuchte
MODE D’EMPLOI (p. 10)
Lampe à LED
GEBRUIKSAANWIJZING (p. 14)
LED Licht
MANUALE (p. 18)
Lampada a LED
MANUAL DE USO (p. 22)
Lámpara LED
HASZNÁLATI ÚTMUTATÓ (o. 26.)
LED Fényforrás
KÄYTTÖOHJE (s. 30)
LED-Valo
BRUKSANVISNING (s. 34)
LED Ljus
NÁVOD K POUŽITÍ (s. 38)
Světlo LED
MANUAL DE UTILIZARE (p. 42)
Sursă de lumină cu LED
ΕΓΧΕΙΡΙΔΙΟ XPHΣ ΣH (σελ. 46)
Προβολέας LED
BRUGERVEJLEDNING (s. 50)
LED Lys
VEILEDNING (s. 54)
LED-lys
2
ENGLISH
LED Light
Package contents:
- KN-LED60 LED light
- Side bracket
- Locking adapter
- Adapter for Sony®
- 7.4 V 2300mAh (NP-F550) rechargeable battery
- 230 V AC charger
- 230 V AC charger cord
Side bracket
Locking adapter Adapter for Sony® camcorders
Li-Ion battery Charger and cord
Charge the battery
To charge the battery, slide the battery onto the face plate of the charger just in front of the metal
contacts and push it forward. Plug one end of the supplied power cord into the charger, and the other
into a wall socket. The charge light will glow red, indicating a charging state, and turns green when
complete. Charge the battery overnight before using it for the first time.
Place the battery as shown... ...and push to the left to lock
3
Installing the battery
To install the battery on the KN-LED60 light, place the battery into the tray just in front of the contacts
and push forward. A “click” will tell indicate it is locked into place. Fully charged, it should last about
1.5 hours.
Press the thumb catch and slide the battery backwards
Removing the battery
To remove the battery press the thumb catches on the unit at the rear of the battery and push back
about 0.25 inches. The battery is now loose and will come apart from the body of the KN-LED60.
Locking adapter
Using the locking adapter
The locking adapter is required when you are using the side bracket or attaching it directly to your
camera’s accessory shoe.
On the KN-LED60, locate one of the two “female” receptacles that will accept the locking adapter’s
silver foot. One will be for “vertical” and one for “horizontal” use.
Slide the silver plate of the locking adapter into the receptacle on the light. Then tighten down the top
knurled ring until the locking adapter is snug on the light. Do not over-tighten!
Mounted on camera shoe
The other foot of the locking adapter has a standard accessory foot, and also 1/4 x 20 threads. If the
light is to be mounted onto a camera, simply slide the locking adapter onto the accessory shoe and
tighten down the knurled ring until the light is snug. Do not over-tighten!
Product specificaties
| Merk: | Konig |
| Categorie: | Overige camera toebehoren |
| Model: | KN-LED60 |
Heb je hulp nodig?
Als je hulp nodig hebt met Konig KN-LED60 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Overige camera toebehoren Konig
8 April 2023
10 Januari 2023
Handleiding Overige camera toebehoren
- Overige camera toebehoren Sony
- Overige camera toebehoren Nikon
- Overige camera toebehoren Canon
- Overige camera toebehoren Olympus
- Overige camera toebehoren Axis
- Overige camera toebehoren DJI
- Overige camera toebehoren Leica
- Overige camera toebehoren Metz
- Overige camera toebehoren Thinkware
- Overige camera toebehoren Sevenoak
- Overige camera toebehoren Digipower
- Overige camera toebehoren Xit
- Overige camera toebehoren Hähnel
- Overige camera toebehoren Kata
- Overige camera toebehoren FeiYu-Tech
Nieuwste handleidingen voor Overige camera toebehoren
4 Maart 2024
16 Januari 2024
31 Oktober 2023
3 Juli 2023
2 Juli 2023
25 Juni 2023
12 Juni 2023
7 Juni 2023
4 Juni 2023
30 Mei 2023