Konig CSBTTRNSM100 Handleiding

Konig Niet gecategoriseerd CSBTTRNSM100

Bekijk gratis de handleiding van Konig CSBTTRNSM100 (81 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 58 mensen en kreeg gemiddeld 4.0 sterren uit 29.5 reviews. Heb je een vraag over Konig CSBTTRNSM100 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/81

CSBTTRNSM100

MANUAL (p. 2)

ANLEITUNG (S. 5)

MODE D’EMPLOI (p. 8)

GEBRUIKSAANWIJZING (p. 11)

MANUALE (p. 14)

MANUAL DE USO (p. 17)

MANUAL (p. 20)

HASZNÁLATI ÚTMUTATÓ (o. 23)

KÄYTTÖOHJE (s. 26)

BRUKSANVISNING (s. 29)

NÁVOD K POUŽITÍ (s. 32)

MANUAL DE UTILIZARE (p. 35)

ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 38)

BRUGERVEJLEDNING (s. 41)

VEILEDNING (s. 44)

ИНСТРУКЦИЯ (47 стр.)

KILAVUZ (s. 50)

KASUTUSJUHEND (lk. 53)

NÁVOD (s. 56)

ROKASGRĀMATA (lpp. 59)

NAUDOJIMO VADOVAS (62 p.)

PRIRUČNIK (str. 65)

РЪКОВОДСТВО (p. 68)

INSTRUKCJA OBSŁUGI (str. 71)

PRIROČNIK (str. 74)

Audio transmitter with Bluetooth® Wireless Technology for headphones

ENGLISH

Product view

Pairing button

USB power connector

Audio input for TV or audio device

Setup

1. Connect the 3.5mm connector to the CSBTTRNSM100.

2. Connect the other 3.5mm connector to the headphone output of a TV or

audio device.

3. Connect the USB connector to the USB port of the TV or audio device (or

connect the USB connector to a USB power adapter)

Operation

Connect the rst set of headphones or music receiver:

1. Take your Bluetooth® headphones or Bluetooth® music receiver.

2. Press the pairing button (check the device manual).

ENGLISH

3. After being connected for the rst time, the two devices will recognise each

other next time.

Connect the second set of headphones or music receiver:

1. Take the second set of Bluetooth® headphones or Bluetooth® music

receiver.

2. Press the pairing button (check the device manual).

3. Press the pairing button on the CSBTTRNSM100 once for approx.

1~2seconds. The LED light starts blinking while the transmitter searches

for the second set of headphones or music receiver. The device that was

connected rst, is muted.

4. If the devices are connected, the LED light is constantly switched on.

Note

The CSBTTRNSM100 features the option to connect two Bluetooth® A2DP

devices at the same time. If you would like to connect a second A2DP device,

you need to reset the CSBTTRNSM100 to establish a new connection.

Reset

Press the pairing button on the CSBTTRNSM100 and release it again. The LED

light on the CSBTTRNSM100 starts blinking while the transmitter is searching

for A2DP devices nearby.

LED indication

Indication Meaning Description

Flash every 5seconds Pairing Searching for a device in pairing mode

Constantly switched on Connected CSBTTRNSM100 and device are

connected

Troubleshooting

If you do not hear any sound coming from your headphones or music receiver,

check the following:

- make sure the CSBTTRNSM100 is powered;

- make sure the audio cable is correctly connected to the CSBTTRNSM100;

- make sure that the audio source is working properly;

- make sure the volume of the audio source is set correctly;

- make sure your device is at a maximum distance of 10metres of the audio

transmitter.

Product specificaties

Merk:	Konig
Categorie:	Niet gecategoriseerd
Model:	CSBTTRNSM100
Gebruikershandleiding:	Ja
Bluetooth-versie:	3.0+HS
Meegeleverde kabels:	Audio (3,5 mm)
Hostinterface:	USB
Draadloze technologie:	Bluetooth
Transmissie-afstand:	10 m