Kohler Choreograph K-97623 Handleiding

Bekijk gratis de handleiding van Kohler Choreograph K-97623 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.3 sterren uit 5 reviews. Heb je een vraag over Kohler Choreograph K-97623 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1460024-2

Record your model number:

Noter le numéro de modèle:

Anote su número de modelo:

CAUTION:Risk of personal injury

. Do not install where the product

might be used as a grab bar or support bar.

CAUTION:Risk of property damage. Screw threads can damage the

nishednished wall. The mounting holes in the wall must be 1/8"

larger than the threads of the screws.

Install 2x4 backing support where the product will be mounted.

1A. 1/8" and Assorted Drill Bits

1B. 2x4

1C. 100% Silicone Sealant

2A. Measure between the centerline of the holes on each wall plate.

3A. Mark the measured distance.

4A. Drill 1/8" pilot holes through the wall and into the 2x4 backing.nished

4B. Enlarge the holes in the wall so that they are 1/8" larger than thenished

threads of the screws. Do not drill into the 2x4 backing.

5A. Apply 100% silicone sealant into the holes.

6A. Remove the wall plates.

Need help? Contact our Customer Care Center.

•USA/Canada: 1-800-4KOHLER (1-800-456-4537), Mexico: 001-800-456-4537

•, isit .For service parts informationvkohler.com/serviceparts

•, visit .For care and cleaning informationkohler.com/clean

1

C

A

B

2

A

X

X

3

A

X

X

4

A

B

This product is covered under the KOHLER

®

Choreograph

®

Walls and

Accessories Ten-Year Limited Warranty, found at . For akohler.com/warranty

hardcopy of warranty terms, contact the Customer Care Center.

1Kohler Co.

ATTENTION :

Risque de blessures. Ne pas installer ce produit aux

emplacements où il pourrait être utilisé comme barre d'appui ou barrede support.

ATTENTION :Risque de dommages matériels. Lesdes vis filets

peuvent endommager le muLes trous dedans le mur fini. fixationr fini

doivent être plus grands de 1/8 po que lesdes vis. filets

Installer un support de renfort 2x4 à l'emplacement où le produit sera monté.

1A. Mèche de 1/8 po et mèches assorties

1B. Planche 2x4

1C. Mastic à la silicone à 100%

1460024-2-B

Product specificaties