Klipsch SB-3 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Klipsch SB-3 (24 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
HD THEATER SB 3
Owner's Manual
PACKING LIST
1. SOUNDBAR
2. WIRELESS SUBWOOFER
3. SOUNDBAR POWER SUPPLY/POWER CORD
4. SUBWOOFER POWER CORD
5. 4.9 FOOT (1.5M) DIGITAL OPTICAL CABLE
6. DUAL RCA CABLE
7. TWO CRADLES
8. ONE REMOTE CONTROL
9. QUICK SETUP GUIDE
10. SOUNDBAR WALL-MOUNT TEMPLATE
11. THIS OWNER’S MANUAL
SOUNDBAR FRONT
SOUNDBAR REAR
SOUNDBAR RIGHT SIDE
SUBWOOFER REAR
SUBWOOFER STATUS LIGHT
BLUE (Solid): Receiving wireless signal from soundbar
RED (Solid): Searching for soundbar wireless signal
PLACEMENT/INSTALLATION
1. Placing/wall-mounting the soundbar: The soundbar is designed to be placed on a
flat surface directly in front of your TV on its two supplied cradles, on a shelf direct-
ly above or below your TV in a piece of furniture or wall-mounted (via keyholes on
the rear of the soundbar) under a TV that is also wall-mounted. If wall-mounting,
rst, use the supplied wall-mount template to mount soundbar. If the two mounting
holes drill into wall studs, screw two wood screws in those holes to hang the sound-
bar on. If there are no wall studs where the holes are drilled, use wall anchors that
support at least 7 pounds (3kg) each to hang the soundbar on. Connect cable from
TV (see Connection section) to soundbar and hang soundbar on wall.
2. Placing the subwoofer: The subwoofer is designed to be placed on the floor in the
same room within 50 feet (15m) of the soundbar near an electrical outlet. For
maximum bass output, place the subwoofer in a corner on the same wall as the TV
and soundbar. Once the soundbar has been connected to the TV and plugged into a
wall outlet, plug the subwoofer into a wall outlet.
POWER
OFFON
SUBWOOFER
VOLUME
MAXMIN
AC~100-240V
50/60Hz
90W
Volume Control
Status Light
Main Power ON/OFF
Power Cord Input
24V – 2.5A
60W
L
R
DC IN
POWER
ONOFF
1 2SOURCE
Main Power
Power Supply InputAnalog RCA Inputs
Digital Optical
Cable Input
TV
TV
3.5mm Analog Input
STATUS LIGHTS
SOURCE MUTE VOLUME DOWN VOLUME UP
SOUNDBAR STATUS LIGHT
RED: In STANDBY (“Sleep”) Mode
GREEN: On Digital Optical Cable Input
ORANGE: On Analog RCA L/R Input
ORANGE (Flashing): RCA Input muted
GREEN (Flashing): Digital Input muted
RED (Flashing): Failure to learn a remote
control command
GREEN OR ORANGE FLASHES: A remote
control signal has been received
BLUE:
On 3.5 mm Analog Input
RED and GREEN (Alternating):
Remote Programming
WHITE (Left Status Light):
In 3D Surround Mode
(Right status light, unless stated)


Product specificaties

Merk: Klipsch
Categorie: Speaker
Model: SB-3

Heb je hulp nodig?

Als je hulp nodig hebt met Klipsch SB-3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Klipsch

Handleiding Speaker

Nieuwste handleidingen voor Speaker