Klipsch Reference RF-83 Handleiding

Klipsch Speaker Reference RF-83

Lees hieronder de 📖 handleiding in het Nederlandse voor Klipsch Reference RF-83 (23 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/23
English
IMPORTANT SAFETY INSTRUCTIONS
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8. DO NOT install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. DO NOT defeat the safety purpose of the polarized or grounding
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wider blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10. PROTECT the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. ONLY USE attachments/accessories specified by the
manufacturer.
12. USE only with a cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. UNPLUG this apparatus during lightning storms or when unused
for long periods of time.
14. REFER all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present within
this unit.
WARNING: To reduce the risk of fire or electrical shock, do not
expose this a tus to rain or moisture.ppara
WARNING: Voltages in this equipment are hazardous to life.
No user-serviceable parts inside. Refer all servicing to qualified
service personnel.
CAUTION: Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate.
UNPACKING
All Models
• Open one end of the carton, invert the speaker and pull the
carton off of the loudspeaker. (See Figure 1.)
• Remove all inner packing, including plastic bags, and re-install
the grille on the front of the cabinet.
Inspect the loudspeaker for shipping damage. If damage has
occurred, notify your Klipsch dealer or the responsible transit
company. Retain all packaging for future use.
Floorstanding Models
Floorstanding models are supplied with foot spikes to enhance
performance on carpeted floors.
• Invert the speaker on a carpeted surface and screw the spikes
into the threaded bushings in the bottom of the feet. Use
caution when turning the speaker upright as the spikes are
sharp! (See Figure 2.)
• Use an assistant to lift the speaker into position.
• Adjust individual spike length to level the speaker after
positioning.
Bookshelf, Center and Surround Models
These models are supplied with self-stick rubber feet to prevent
surface damage. (See Figure 2 for proper application.)
ROOM PLACEMENT
Your Reference loudspeakers will perform well in a variety of
loca ollowingtions, but best results will be achieved using the f
guidelines:
Front Left and Right Speakers (See Figures 3 and 4.)
• Place on a common wall 6 to 15 feet apart.
• If used in a home theater system, position the speakers
flanking your video display.
• Position them equidistant from the back wall.
• Postition them at the same height above the floor (for non-floor
standing models) with the high frequency drivers at seated
ear height.
• Angle speakers toward the listener and even with or forward of
any adjacent obstructions.
• Placing them near a corner or wall provides the greatest
amount of bass while moving the speakers away from room
boundaries reduces bass energy.
• Asymmetrical placement of a pair of speakers from adjacent
side walls can smooth room-induced bass unevenness.
• Bookshelf models may be placed on shelves or optional floor
stands.
• Experiment with the above guidelines to suit your taste and to
compensate for your room's acoustic characteristics.
Center Channel Speakers (See Figures 3 and 4.)
• Place immediately above or below the center of your video
display.
• These models are supplied with a tilt rod to compensate for
placements above or below seated ear height.
• Use the supplied self-stick rubber pads to cover the threaded
bushing holes (2) if the tilt rod is not used. (See Figure 2.)
Surround Channel Speakers (See Figures 3 and 4.)
• Place above seated ear height (5 to 7 feet above the floor) on
side or rear walls.
• Use the attached wall bracket to hook to an appropriately sized
screw head screwed into a wall stud or wall anchor with a
suitable weight bearing capacity. (See Figure 4.)
• See your Klipsch dealer for optional, adjustable wall mounts if
required. These mounts utilize the threaded bushings on the
rear of the cabinet.
Caution! Never use the attached wall bracket for
mounting the speaker to the ceiling!
CONNECTING
Caution! Turn your amplifier off before making
any connections.
• Your loudspeakers are equipped with positive (Red) and
negative (Black) connection terminals on the rear of the
cabinet. These correspond to the positive and negative
terminals on the appropriate channel (left, right, center, rear
etc.) of your amplifier.
Standard Connections (See Figure 5.)
• All speakers in your system must be connected in phase with
the positive speaker terminal connected to the positive amplifier
terminal. Repeat this for the negative speaker terminal and
amplifier terminals. Most speaker wire has distinguishing
markings on the insulation of one of the conductors to assist in
correct hookup.
• Use 16 gauge (AWG), two conductor, copper wire at a
minimum and larger gauge wire for longer runs. The connection
terminals on your loudspeaker will accommodate bare wire,
spade terminals or banana type plugs.
• Use either pair of positive and negative terminals keeping the
metal coupling straps in place.
Caution! With all connection types, take care that there is
no contact between the positive and negative terminals
at the speaker and amplifier. Damage to your equipment
may result!
Bi-wire Connections (See Figure 6.)
Some models are equipped with two pairs of connection
terminals for bi-wire hookup and enhanced performance.
• Remove the metal coupling straps.
Bass Management
When using your speakers in a home theater system, consult
the owner’s manual of your surround electronics for proper
application of bass management settings.
• As a general rule, compact speakers (Bookshelf, Center
Channel and Surrounds) are set to the “Small,” or bass-limited
setting.
• Floorstanding speakers are typically set to the “Large,” or
full-range setting.
• Also refer to the electronics instructions for adjusting the
relative volume levels of the speakers so they are at the same
level when in the listening position.
CARE AND CLEANING
• Occasional dusting or wiping of the cabinet with a damp cloth
is all that is required. Never use abrasive or solvent type
cleaners or harsh detergents.
• A vacuum cleaner with a soft brush attachment may be used to
clean the grille fabric.
• Never spray polishes or cleaners on the drive units (woofers,
midranges or tweeters).
WARRANTY
USA and Canada Only
The Warranty below is valid only for sales to consumers in the
United States and Canada. KLIPSCH, L.L.C. (“KLIPSCH”)
warranties this product to be free from defects in materials or
workmanship (subject to the terms set forth below) for a period
of five (5) years from the date of purchase. During the Warranty
period, Klipsch will repair or replace (at KLIPSCH’s option) this
product or any defective parts (excluding electronics and
amplifiers). For products that have electronics or amplifiers, the
Warranty period on those parts is for a period of two (2) years
from the date of purchase.
To obtain Warranty service, please contact the KLIPSCH
authorized dealer from which you purchased this product. If your
dealer is not equipped to perform the repair of your KLIPSCH
product, it can be returned, freight paid, to KLIPSCH for repair.
Please call KLIPSCH at 1-800-KLIPSCH for instructions. You will
need to ship this product in either its original packaging or pack-
aging affording an equal degree of protection.
Proof of purchase in the form of a bill of sale or receipted invoice,
which is evidence that this product is within the Warranty period,
must be presented or indicated to obtain Warranty service.
This Warranty is invalid if (a) the factory-applied serial number
has been altered or removed from this product or (b) this product
was not purchased from a KLIPSCH authorized dealer. You may
call 1-800-KLIPSCH to confirm that you have an unaltered serial
number and/or you purchased from a KLIPSCH authorized dealer.
This Warranty is valid only for the original purchaser and will
automatically terminate prior to expiration if this product is sold or
otherwise transferred to another party.
This Warranty does not cover cosmetic damage or damage due
to misuse, abuse, negligence, acts of God, accident, commercial
use or modification of, or to any part of, the product. This
Warranty does not cover damage due to improper operation,
maintenance or installation, or attempted repair by anyone other
than KLIPSCH or a KLIPSCH dealer which is authorized to do
KLIPSCH warranty work. Any unauthorized repair will void this
Warranty. This Warranty does not cover product sold AS IS or
WITH ALL FAULTS.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS
WARRANTY ARE THE EXCLUSIVE REMEDY OF THE CONSUMER.
KLIPSCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR

Product specificaties

Merk: Klipsch
Categorie: Speaker
Model: Reference RF-83

Heb je hulp nodig?

Als je hulp nodig hebt met Klipsch Reference RF-83 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker Klipsch

Klipsch

Klipsch PRO-1-SM Handleiding

8 April 2024
Klipsch

Klipsch PRO-800SW Handleiding

3 April 2024
Klipsch

Klipsch DS-160CDT Handleiding

3 April 2024
Klipsch

Klipsch THX-6000-LCR-R Handleiding

3 April 2024
Klipsch

Klipsch DS-160C Handleiding

3 April 2024
Klipsch

Klipsch THX-6000-LCR-L Handleiding

3 April 2024
Klipsch

Klipsch CS-16C II Handleiding

3 April 2024
Klipsch

Klipsch DS-160CSM Handleiding

3 April 2024
Klipsch

Klipsch DS-180CDT Handleiding

3 April 2024
Klipsch

Klipsch DS-250W LCR Handleiding

3 April 2024

Handleiding Speaker

Nieuwste handleidingen voor Speaker

OTTO

OTTO Bluetooth Revo NC2 Handleiding

20 April 2024
REL Acoustics

REL Acoustics Strata Handleiding

20 April 2024
REL Acoustics

REL Acoustics Strata III Handleiding

20 April 2024
Soen

Soen Transit Handleiding

18 April 2024
Miller & Kreisel

Miller & Kreisel MP300RC Handleiding

18 April 2024
Soen

Soen Transit XS Handleiding

18 April 2024
Miller & Kreisel

Miller & Kreisel MP7 Handleiding

18 April 2024
Qian

Qian QRBT1801 Handleiding

17 April 2024
Focal

Focal Twin6 Handleiding

17 April 2024
Kenwood

Kenwood KFC-WPS1000F Handleiding

16 April 2024