Klipsch Reference Premiere RP-240D Handleiding

Klipsch Speaker Reference Premiere RP-240D

Lees hieronder de 📖 handleiding in het Nederlandse voor Klipsch Reference Premiere RP-240D (28 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28

Owner's Manual

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS!

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including ampliﬁers) that produce heat.

9. ONLY USE attachments/accessories speciﬁed by the manufacturer.

10. USE only with a cart, stand, tripod, bracket, or table speciﬁed by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip over.

11. DO NOT expose this apparatus to dripping or splashing and ensure that no objects ﬁlled with

liquids, such as vases, are placed on the apparatus.

The exclamation point, within an equilateral triangle, is intended to alert the user to

the presence of important operating and maintenance (servicing) instructions in the

literature accompanying the product.

The lightning ﬂash with arrowhead symbol within an equilateral triangle, is intended

to alert the user to the presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufﬁcient magnitude to constitute a risk of

electrical shock to persons.

WARNING: To reduce the risk of ﬁre or electrical shock, do not expose this apparatus to rain or moisture.

WARNING: No naked ﬂame sources – such as candles – should be placed on the product.

THANK YOU

Thank you for your purchase of the Klipsch Reference Premiere Designer On-Wall

speakers! Each speaker blends versatile, superior styling with legendary Klipsch

lifelike sound for seamless integration into any décor. The RP-140D, RP-240D

and RP-640D speakers are designed to operate vertically or horizontally as left,

center, right or surround speakers while the RP-440D sound bar combines the

three front channels in one aesthetic cabinet. Each model comes with a high

quality, elegant, tempered glass base for stand, table or bookshelf placement and

keyhole mounts for on-wall placement.

PRODUCT REGISTRATION

• Klipsch Group Inc, (KGI) will keep you up-to-date on new products and promotions

• Your personal information will never be resold

• This registration information is not used for warranty purposes.

Please retain your receipt for warranty claims.

ROOM PLACEMENT

Before You Start — Some Klipsch speakers have feet and other accessories

that may need to be installed prior to use.

Left and Right Main Channel Speakers — For the most spacious sound

KGI suggests placing the RP-140D, RP-240D or RP-640D front left/right

speakers six to 15 feet (2 to 4.5m) apart with the listening position about 1 to

1.5 times the distance separating the speakers. Excellent sound can still be

achieved by placing/wall-mounting these speakers close to both sides of your

TV if that is more aesthetically pleasing.

Center Channel Speakers — Speakers used as center channel speakers are

designed to place dialogue and primary sounds so that they appear to come

from the video screen. These speakers should therefore be placed/wall-mounted

horizontally, as close to the screen as possible, preferably at least 1" directly

below the screen. The RP-440D three-channel sound bar should also be placed/

wall-mounted this way.

Rear Surround Channel Speakers — Speakers used as surround speakers

should be placed approximately 2 feet above the listening position. Typically this

will be about 5-7 feet above the ﬂoor. The surrounds should be placed on the

walls directly adjacent to the listening position. Another option would be on the

wall behind the listening position. The ﬁnal surround speaker placement depends

on your room’s characteristics.

SPEAKER/SOUND BAR PEDESTAL INSTALLATION

If you place your RP-140D,RP-240D,RP-640D speakers or RP-440D sound

bar on a stand, table, etc. (vs. mounting on the wall), you will need to attach the

provided tempered glass pedestals with the included screws.

Before you attach a pedestal, have the speaker wire that will attach to that speaker

available since attaching the pedestal and connecting the speaker wire to a speaker

are done at the same time (see “Connecting” section for proper wire connection).

The RP-140D, RP-240D and RP-640D speakers can be attached vertically or

horizontally onto their pedestals and, therefore, have threaded inserts in two

different positions on the rear of these speakers. The RP-440D sound bar can

only be attached horizontally to its pedestal. Attach the pedestal as follows:

1. Insert speaker wires (one set for RP-140D, RP-240D and RP-640D and

three sets, left, right and center channel for RP-440D sound bar) inside hole

in pedestal back and pull through pedestal top (See Diagram 2).

2. Position speaker/sound bar on ridge on pedestal top, lining up the holes

in the top with the threaded inserts on the speaker (the RP-140D has just

one insert when in horizontal position and it should lineup with left hole on

pedestal top). (See Diagram 2)

3. Using a Phillips screwdriver, screw the screws partially into the speaker

inserts, without tightening them. (See Diagram 2)

4. If vertical mounting, attach speaker wires (see Diagram 1), adjust wires

to ﬁt in recessed area around terminals and tighten Phillips screws on

pedestal. , route speaker wire from the rear center If horizontal mounting

of speaker through channel(s) to the speaker terminals, attach speaker

wires in same manner as vertical mounting, then tighten Phillips screws

on pedestal. With the RP-440D sound bar, use both channels to route all

three sets of wires to the speaker terminals. (See Diagram 3) (Note: using

speaker wire larger than 18 gauge on the RP-440D may not allow

wire(s) to completely ﬁt in channels). If needed, use the included adhe-

sive strip to hold excess wire in place. To change the Klipsch logo direction

on the speaker front pull out one side of it and rotate 45˚.gently

C A U T I O N

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this

equipment are hazardous to life. No user-serviceable parts inside.

Refer all servicing to qualified service personnel.

Product specificaties

Merk:	Klipsch
Categorie:	Speaker
Model:	Reference Premiere RP-240D
Kleur van het product:	Zwart
Gewicht:	2380 g
Breedte:	152.4 mm
Diepte:	61 mm
Hoogte:	406.4 mm
Materiaal behuizing:	Acrylonitrielbutadieenstyreen (ABS)
Connectiviteitstechnologie:	Draadloos
Gemiddeld vermogen:	75 W
Aantal per verpakking:	1 stuk(s)
Impedantie:	8 Ohm
Audio-uitgangskanalen:	- kanalen
Speaker plaatsing:	Muur-montage
Woofer:	Ja
Soort magneet:	Keramisch
Bass reflex:	Ja
Luidspreker soort:	4-weg
Diameter woofer:	88.9 mm
Diameter hogetonenluidspreker:	25.4 mm
RMS-vermogen luidsprekers:	300 W
Tweeter:	Ja
Crossover frequentie:	2200 Hz
Speaker positie:	Voorkant