Klipsch LightSpeaker Handleiding

Klipsch Speaker LightSpeaker

Lees hieronder de 📖 handleiding in het Nederlandse voor Klipsch LightSpeaker (24 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
Tech Support: 1-800-KLIPSCH
1
OWNER’S MANUAL
State-of-the-art LIGHT & SOUND
One LightSpeakerÂź 5 installs in 15 minutes or less!
Note: The LightSpeakerÂź is an add on unit to an existing LightSpeakerÂź System. You
need a LightSpeakerÂź Transmitter to supply audio and control the lights on this unit.
The Transmitter and Remote discussed in the manual are sold separately.
2
Tech Support: 1-800-KLIPSCH
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric
shock to persons.
Le symbole de l’éclair flĂ©chĂ© dans un triangle Ă©quilatĂ©ral, a pour but
d’avertir l’utilisateur de la prĂ©sence non isolĂ©es d’une «tension
dangereuse» dans le boĂźtier du produit que mai d’une magnitude
suffisante pour constituer un risque d’électrocution pour les
personnes.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
Le point d’exclamation dans un triangle Ă©quilatĂ©ral sert Ă  alerter
l’utilisateur de la prĂ©sence d’importantes exploitation et de
maintenance (entretien) dans la documentation accompagnant
l’appareil.
Caution marking is located at the side of the apparatus.
Attention marquage est situĂ© sur le cĂŽtĂ© de l’appareil.
CAUTION: Risk of Electrical Shock - Use in Dry Locations Only
ATTENTION: Risque de Choc Électrique - Utiliser Seulement Dans des Endroits
Secs
CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No
user servicable parts – refer servicing to qualified service personnel only.
ATTENTION: Pour réduire le risque de choc électrique, ne pas retirer le
couvercle (ou l’arriùre). Non utilisateur servicable parts - confier l’entretien de
service qualifie seul le personnel.
WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
AVERTISSEMENT: Pour rĂ©duire le risque d’incendie ou de choc Ă©lectrique, ne
pas exposer cet appareil sous la pluie et l’humiditĂ©.
Tech Support: 1-800-KLIPSCH
3
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions. Keep these instructions. Heed all Warnings. Follow
all instructions.
2. Do not use this apparatus near water. The apparatus shall not be exposed
to dripping or splashing and that no objects filled with liquids, such as vases,
shall be placed on apparatus.
3. Clean only with a dry cloth.
4. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
5. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
6. The lamp holder is used as disconnect device. The lamp holder of apparatus
should not be obstructed OR should be easily accessed during intended use.
To completely disconnect the power input, the lamp holder of the apparatus
shall be disconnected from the mains.
7. Only use attachments/accessories specified by the manufacturer.
8. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
9. Added weight of the device may cause instability of a free-standing portable
lamp. Use only with portable table lamps in which the distance from the
bottom of the base to the top of the lampholder does not exceed three (3)
times minimum base width. Use only with portable table lamps which are
provided with lamp shades” or the equivalent.
10. This device is not intended for use with emergency exit fixtures or
emergency exit lights
11. NOT FOR USE WHERE EXPOSED TO THE WEATHER
NE PAS EXPOSER AUX INTEMPÉRIES
12. NOT FOR USE IN TOTALLY ENCLOSED RECESSED LUMINAIRES
NE PAS INSTALLER DANS DES LUMINAIRES ENCASTRÉS COMPLÈTEMENT
FERMÉS


Product specificaties

Merk: Klipsch
Categorie: Speaker
Model: LightSpeaker

Heb je hulp nodig?

Als je hulp nodig hebt met Klipsch LightSpeaker stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Klipsch

Handleiding Speaker

Nieuwste handleidingen voor Speaker