Klipsch Icon Series X Handleiding

Klipsch Speaker Icon Series X

Lees hieronder de 📖 handleiding in het Nederlandse voor Klipsch Icon Series X (36 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36
Icon Series
Owner's Manual
The exclamation point, within an equilateral triangle, is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the product.
The lightning flash with arrowhead symbol within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electrical shock to
persons.
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. DO NOT install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. DO NOT defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wider blade or the
third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. PROTECT the power cord from being walked on or
pinched, particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. ONLY USE attachments/accessories specified by the
manufacturer.
12. USE only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. UNPLUG this apparatus during lightning storms
or when unused for long periods of time.
14. REFER all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as the power-supply cord or
plug is damaged, liquid has been spilled, objects have
fallen into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been
dropped.
15. DO NOT expose this apparatus to dripping or splashing and
ensure that no objects filled with liquids, such as vases,
are placed on the apparatus.
16. To completely disconnect this apparatus from the AC
mains, disconnect the power supply cord plug from the AC
receptacle.
17. The mains plug of the power supply cord shall remain
readily operable.
Important Safety Information
2
These models are supplied with self-stick rubber feet to prevent
surface damage. (See Figure 1 for proper application.)
Bookshelf, Center and LCR Models
Thank you for your purchase of this Icon Series Loudspeaker. In
total, there are six models within the new Icon Series: the XF-48
fully-active floorstander, XL-23 left/center/right speaker, XL-12 left/
center/right speaker, XB-10 bookshelf/satellite speaker, as well as
the XW-500d and XW-300d subwoofers.
All of these speakers, except for the subwoofers, utilize a new wide
dispersion Tractrix® Horn-loaded tweeter with XT
TM technology.
This proprietary design diffuses sound in a smooth, enveloping
80-degree by 80-degree pattern from extremely thin cabinets. As
with all Klipsch horn-loaded technology, this version also produces
more output using less energy and delivers the company’s signature
dynamic sound.
Please be sure to fill out the warranty card included with this manual
or online at www.klipsch.com so we are better able to serve you.
Icon Series Loudspeaker
WARNING:
To reduce the risk of fire or electrical shock, do not expose
this apparatus to rain or moisture.
WARNING: No naked flame sources – such as candles – should be
placed on the product.
WARNING: This product is intended to be operated ONLY from the
AC Voltages listed on the back panel or included power supply of the
product. Operation from voltages other than those indicated may cause
irreversible damage to the product and void the product's warranty. The
use of AC Plug Adapters is cautioned because it can allow the product
to be plugged into voltages in which the product was not designed to
operate. If the product is equipped with a detachable power cord, use
only the type provided with your product or by your local distributor
and/or retailer. If you are unsure of the correct operational voltage,
please contact your local distributor and/or retailer.
CAUTION: Place the equipment near a main power supply outlet and
make sure that you can easily access the power breaker switch.
W A R N I N G
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this
equipment are hazardous to life. No user-serviceable parts inside.
Refer all servicing to qualified service personnel.
Please check promptly for any transit damage. Carefully unpack
your new speaker system and verify the components against the
packing list. In extreme circumstances, items may have become
damaged in transit. If any damage is discovered, notify the delivery
service and dealer where the system was purchased. Make a
request for inspection, and follow their instructions for evaluation.
Be sure to keep the product’s original shipping carton.
Inspection
Connecting
• Your loudspeakers are equipped with positive (Red) and negative
(Black) connection terminals on the rear of the cabinet. These
correspond to the positive and negative terminals on the
appropriate channel (left, right, center, rear etc.) of your amplifier.
Your Icon loudspeakers will perform well in a variety of locations,
but best results will be achieved using the following guidelines:
Front Left and Right Speakers (See Figures 2A and 2B.)
• Place on a common wall 6 to 15 feet apart.
• If used in a home theater system, position the speakers
flanking your video display.
• Position them equal distance from the back wall (if they are
not wall-mounted).
• Position them at the same height above the oor
(for non-floor standing models) with the high frequency
drivers at seated ear height.
• Angle speakers toward the listener and even with or forward
of any adjacent obstructions (if they are not wall-mounted).
• Placing them near a corner or wall provides the greatest
amount of bass while moving the speakers away from room
boundaries reduces bass energy.
• Asymmetrical placement of a pair of speakers from adjacent
side walls can smooth room-induced bass unevenness.
• Bookshelf models may be placed on shelves or optional floor stands.
• Experiment with the above guidelines to suit your taste and to
compensate for your room’s acoustic characteristics.
Room Placement
3
Center Channel Speakers (See Figures 2A, 2B and 3.)
• Place immediately above or below the center of your video display.
• These models are supplied with a tilt rod to compensate for
placements above or below seated ear height.
• Use the supplied rubber pad to protect the front bottom edge
of the speaker. (See Figure 3.)
Surround Channel Speakers (See Figures 2A, 2B and 3.)
• Place above seated ear height on side or rear walls
(approximately 4-5 feet above the floor) or on optional
floorstands.
• Attach wall bracket with an appropriately sized screw head
screwed into a wall stud or wall anchor with a suitable weight
bearing capacity. (See Figure 3.)
• See your Klipsch dealer for optional, adjustable wall mounts if
required. These mounts utilize the threaded bushings on the
rear of the cabinet.
Never use the wall bracket for mounting the speaker to
the ceiling.
On Wall Placement (See Figure 3.)
• Icon LCR and bookshelf models may be wall-mounted
using the included wall bracket.
Turn your amplifier off before making any
connections.
Standard Connections (See Figure 4.)(All Models)
• All speakers in your system must be connected in phase with
the positive speaker terminal connected to the positive
amplifier terminal. Repeat this for the negative speaker
terminal and amplifier terminals. Most speaker wire has
distinguishing markings on the insulation of one of the
conductors to assist in correct hookup.
• Use 16 gauge (AWG), two conductor, copper wire at a
minimum and larger gauge wire for longer runs. The
connection terminals on your loudspeaker will accommodate
bare wire, and spade terminals.
Active Floorstander Connections
(See figure 5.)(XF-48 only)
Your floorstanding speakers have a built-in amplifier that
needs to be connected to an AC outlet. Once plugged in, it
will be either ON or in STANDBY depending upon the position
of the AUTO POWER switch. You must unplug the power cord
from the AC outlet to completely turn off your speaker during
extended periods. (i.e. vacations.)
There are two methods of connection provided on the input panel
of the XF-48. One is a single RCA-jack that functions as a line-level
input and the other is a set of binding posts that function as a high-
level input. Both are provided in order to connect to a wide variety
of electronics. Depending upon your system, one or both of these
connections may be available.
Do not connect both the standard SPEAKER IN and
the LINE IN inputs at the same time as damage to
your equipment could result.
With all connection types, take care that there is no
contact between the positive and negative terminals
at the speaker and amplifier. Damage to your equipment
may result.
In most applications, best performance will be attained by using
the line-level input. Additionally, there is a “Sensitivity” switch on
the input panel that will help match the line-level input signal to
the source connected. Below are the recommended connection
methods and sensitivity settings based upon the equipment
source:
• When using with a source that has line-level preouts such as
an A/V receiver or preamplifier, connect the XF-48 line-level
input to the line-level preouts of the source. In most cases,
the sensitivity switch should be set to “LOW”.
• In some instances, the source line-level voltage may be too
low to get full output from the XF-48. In those cases, set the
sensitivity switch to “HIGH”.
• If your source does not have line-level preouts, you may
connect the XF-48 to the source via the binding post high-
level inputs. In this manner, the speaker would be connected
to the amplifier outputs as if it were a traditional passive
speaker. In most cases, the sensitivity switch should be set
to “LOW”.
In some rare cases, you may find it necessary to connect the
XF-48 to the high-level binding posts and have the sensitivity
switch set to “HIGH”. In this manner, there may be slight audible
noise from the speaker at very low levels.

Product specificaties

Merk: Klipsch
Categorie: Speaker
Model: Icon Series X

Heb je hulp nodig?

Als je hulp nodig hebt met Klipsch Icon Series X stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker Klipsch

Klipsch

Klipsch PRO-1-SM Handleiding

8 April 2024
Klipsch

Klipsch PRO-800SW Handleiding

3 April 2024
Klipsch

Klipsch DS-160CDT Handleiding

3 April 2024
Klipsch

Klipsch THX-6000-LCR-R Handleiding

3 April 2024
Klipsch

Klipsch DS-160C Handleiding

3 April 2024
Klipsch

Klipsch THX-6000-LCR-L Handleiding

3 April 2024
Klipsch

Klipsch CS-16C II Handleiding

3 April 2024
Klipsch

Klipsch DS-160CSM Handleiding

3 April 2024
Klipsch

Klipsch DS-180CDT Handleiding

3 April 2024
Klipsch

Klipsch DS-250W LCR Handleiding

3 April 2024

Handleiding Speaker

Nieuwste handleidingen voor Speaker

OTTO

OTTO Bluetooth Revo NC2 Handleiding

20 April 2024
REL Acoustics

REL Acoustics Strata Handleiding

20 April 2024
REL Acoustics

REL Acoustics Strata III Handleiding

20 April 2024
Soen

Soen Transit Handleiding

18 April 2024
Miller & Kreisel

Miller & Kreisel MP300RC Handleiding

18 April 2024
Soen

Soen Transit XS Handleiding

18 April 2024
Miller & Kreisel

Miller & Kreisel MP7 Handleiding

18 April 2024
Qian

Qian QRBT1801 Handleiding

17 April 2024
Focal

Focal Twin6 Handleiding

17 April 2024
Kenwood

Kenwood KFC-WPS1000F Handleiding

16 April 2024