Klipsch G-16 Handleiding

Klipsch Speaker G-16

Lees hieronder de 📖 handleiding in het Nederlandse voor Klipsch G-16 (20 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 82 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20

Klipsch Gallery Series

Owner's Manual

™

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS!

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including ampliﬁers) that produce heat.

9. ONLY USE attachments/accessories speciﬁed by the manufacturer.

10. USE only with a cart, stand, tripod, bracket, or table speciﬁed by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip over.

11. DO NOT expose this apparatus to dripping or splashing and ensure that no objects ﬁlled with

liquids, such as vases, are placed on the apparatus.

The exclamation point, within an equilateral triangle, is intended to alert the user to

the presence of important operating and maintenance (servicing) instructions in the

literature accompanying the product.

The lightning ﬂash with arrowhead symbol within an equilateral triangle, is intended

to alert the user to the presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufﬁcient magnitude to constitute a risk of

electrical shock to persons.

WARNING: To reduce the risk of ﬁre or electrical shock, do not expose this apparatus to rain or moisture.

WARNING: No naked ﬂame sources – such as candles – should be placed on the product.

THANK YOU

Thank you for your purchase of the Klipsch Gallery™ Series speakers! Each

speaker blends versatile, superior styling with legendary Klipsch

® lifelike sound for

seamless integration into any décor. The G-12, G-16 and G-28 speakers are de-

signed to operate vertically or horizontally as left, center, right or surround speak-

ers while the G-42 soundbar combines the three front channels in one aesthetic

cabinet. Each model comes with a high quality, elegant, tempered glass base for

stand, table or bookshelf placement and keyhole mounts for on-wall placement.

PRODUCT REGISTRATION

• Klipsch Group Inc, (KGI) will keep you up-to-date on new products and promotions

• Your personal information will never be resold

• This registration information is not used for warranty purposes.

Please retain your receipt for warranty claims.

ROOM PLACEMENT

Before You Start — Some Klipsch speakers have feet and other accessories

that may need to be installed prior to use.

Left and Right Main Channel Speakers — For the most spacious sound

KGI suggests placing the G-12, G-16 or G-28 front left/right speakers six

to 15 feet (2 to 4.5m) apart with the listening position about 1 to 1.5 times the

distance separating the speakers. Excellent sound can still be achieved by

placing/wall-mounting these speakers close to both sides of your TV if that is

more aesthetically pleasing.

Center Channel Speakers — Speakers used as center channel speakers are

designed to place dialogue and primary sounds so that they appear to come

from the video screen. These speakers should therefore be placed/

wall-mounted horizontally, as close to the screen as possible, preferably at least

1" directly below the screen. The G-42 three-channel soundbar should also be

placed/wall-mounted this way.

Rear Surround Channel Speakers — Speakers used as surround speakers

should be placed approximately 2 feet above the listening position. Typically this

will be about 5-7 feet above the ﬂoor. The surrounds should be placed on the

walls directly adjacent to the listening position. Another option would be on the

wall behind the listening position. The ﬁnal surround speaker placement depends

on your room’s characteristics.

SPEAKER/SOUNDBAR PEDESTAL INSTALLATION

If you place your G-12,G-16,G-28 speakers or G-42 soundbar on a stand, table,

etc. (vs. mounting on the wall), you will need to attach the provided tempered

glass pedestals with the included screws.

Before you attach a pedestal, have the speaker wire that will attach to that speaker

available since attaching the pedestal and connecting the speaker wire to a speaker

are done at the same time (see “Connecting” section for proper wire connection).

The G-12, G-16 and G-28 speakers can be attached vertically or horizontally onto

their pedestals and, therefore, have threaded inserts in two different positions on

the rear of these speakers. The G-42 soundbar can only be attached horizontally

to its pedestal. Attach the pedestal as follows:

1. Insert speaker wires (one set for G-12, G-16 and G-28 and three sets, left,

right and center channel for G-42 soundbar) inside hole in pedestal back

and pull through pedestal top (See Diagram 2).

2. Position speaker/soundbar on ridge on pedestal top, lining up the holes in

the top with the threaded inserts on the speaker (the G-12 has just one

insert when in horizontal position and it should lineup with left hole on

pedestal top). (See Diagram 2)

3. Using a Phillips screwdriver, screw the screws partially into the speaker

inserts, without tightening them. (See Diagram 2)

4. If vertical mounting, attach speaker wires (see Diagram 1), adjust wires

to ﬁt in recessed area around terminals and tighten Phillips screws on

pedestal. , route speaker wire from the rear center If horizontal mounting

of speaker through channel(s) to the speaker terminals, attach speaker

wires in same manner as vertical mounting, then tighten Phillips screws on

pedestal. With the G-42 soundbar, use both channels to route all three sets

of wires to the speaker terminals. (See Diagram 3) (Note: using speaker

wire larger than 18 gauge on the G-42 may not allow wire(s) to com-

pletely ﬁt in channels). If needed, use the included adhesive strip to hold

excess wire in place. To change the Klipsch logo direction on the speaker

front pull out one side of it and rotate 45˚.gently

C A U T I O N

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this

equipment are hazardous to life. No user-serviceable parts inside.

Refer all servicing to qualified service personnel.

Product specificaties

Merk:	Klipsch
Categorie:	Speaker
Model:	G-16
Kleur van het product:	Zwart
Gewicht:	2380 g
Connectiviteitstechnologie:	Bedraad
Gemiddeld vermogen:	75 W
Aanbevolen gebruik:	Luidsprekerset
Impedantie:	8 Ohm
Audio-uitgangskanalen:	1.0 kanalen
Speaker plaatsing:	Tafelblad/Boekenplank
Aantal drivers:	3
Woofer:	Ja
Peak Music Power Output (PMPO):	300 W
Frequentiebereik:	67 - 24000 Hz
Gevoeligheid:	94 dB
Bass reflex:	Ja
Luidspreker soort:	2-weg
Diameter woofer:	88.9 mm
Aantal woofer drivers:	2
Diameter hogetonenluidspreker:	25.4 mm
Aantal tweeter drivers:	1
Tweeter:	Ja
Crossover frequentie:	2200 Hz