Klein Tools ET300AU Handleiding

Bekijk gratis de handleiding van Klein Tools ET300AU (35 pagina’s), behorend tot de categorie Meetapparatuur. Deze gids werd als nuttig beoordeeld door 13 mensen en kreeg gemiddeld 4.0 sterren uit 3 reviews. Heb je een vraag over Klein Tools ET300AU of wil je andere gebruikers van dit product iets vragen? Stel een vraag

CUSTOMER SERVICE

KLEIN TOOLS

25 Aldershot Road

Lonsdale, SA 5160

1300 55 77 77

www.kleintoolsaustralia.com

139781 Rev. 01/15 D

Instruction Manual

•FULLY AUTOMATIC

•FLASHING ARROW

INDICATOR FOR

EASY IDENTIFICATION

•90 – 280V AC

OPERATION

•MICROPROCESSOR

CONTROLLED FOR

MORE ACCURATE

READINGS

Apo

Digital Circuit

Breaker Finder

5291

ET300AU

ENGLISH

ET300AU

PATENT NO. 6,222,358

90-280VAC

25W

Digital Circuit Breaker

Finder

ET300AU

SCAN

RECEIVER

Micro-Processor

Controlled

ET300AU

Instruction Manual

GENERAL SPECIFICATIONS

•Operating Voltage:90 – 280V AC, 25W

•Operating Frequency: 50 – 60Hz

• Tracking Distance:Up to 305 m (1,000 ft.)

•Operating Temperature:0°C to 40°C (32°F to 104°F)

•Relative Humidity: 50%

•Altitude: < 2,000 m (6,562 ft.)

•Environment: For indoor use only

•Power:9 volt alkaline battery

•Auto Power Off: Approximately 4 minutes

•Transmitter Dimensions: 71 x 48 x 30 mm (3" x 2" x 1")

•Receiver Dimensions:152 x 51 x 23 mm (6" x 2" x 1")

•Transmitter Weight:45 g (1.6 oz.)

•Receiver Weight: 91 g (3.2 oz.)

•Sensitivity:

Indication at 4 mm (0.16") distance from a wire carrying 250V AC.

•Safety Rating:AUSTRALIA RCM 5291 (Regulatory Compliance Mark)

•Insulation:Double

SAFETY PRECAUTIONS

To ensure safe operation and service of the tester, follow these instructions.

Failure to observe these warnings can result in severe injury or death.

•Understandtherisksofworkingaroundlivevoltage.

•Turnoffpowerbeforeinspecting,applying,orremoving

the transmitter.

•Exerciseextremecautionaroundlive,barewires,especially

in an open breaker panel.

•Consultwithanexperiencedelectricianwhennecessary.

INSTRUCTIONS

1.Identify the wall outlet or fixture for which the breaker must be

determined.

2. Safely check that the outlet or fixture is live.

3.Pluginthetransmitter.ItsLEDwilllightifitisreceivingpower

(see illustration 1).

4.Move to the breaker panel with the receiver.

5.Turn on the receiver by pressing, but not holding, the power button.

YouwillhearabeepandseeitsLEDlit(seeillustration2).

6.Position the receiver to the breakers in the panel perpendicular

to be scanned (see illustrations 3 & 4).

7.Slowly scan all breakers in the panel once by moving the receiver

side to side along the breaker panel (see illustrations 3 & 4). Ignore

any beeps or indications, as the receiver is learning the panel.

8.Scan all breakers a second time. This time, the receiver will beep

and illuminate the green arrow only at the correct breaker.

9. Power off the receiver by pressing and holding the power button

Return to the outlet or fixture and remove the transmitter.

1

Once plugged in, the LED

will light up when

socket is live

ET300AU

PATENT NO. 6,222,358

90-280VAC

25W

2

LED will light up

When you press

down on the

Power Button

Digital Circuit Breaker

Finder

ET300AU

SCAN

ocessor

ed

3

4

WARRANTY

www.kleintools.com/warranty

CLEANING

Clean the instrument by using a damp cloth. Do not use abrasive cleaners

or solvents.

STORAGE

Remove the batteries when instrument is not in use for a prolonged period of

time. Do not expose to high temperatures or humidity. After a period of storage in

extreme conditions exceeding the limits mentioned in the Specifications section,

allow the instrument to return to normal operating conditions before using it.

DISPOSAL / RECYCLE

Do not place equipment and its accessories in the trash. Items must

be properly disposed of in accordance with local regulations.

Product specificaties