Klark Teknik CM-2 Handleiding

Bekijk gratis de handleiding van Klark Teknik CM-2 (2 pagina’s), behorend tot de categorie Microfoon. Deze gids werd als nuttig beoordeeld door 47 mensen en kreeg gemiddeld 4.4 sterren uit 7 reviews. Heb je een vraag over Klark Teknik CM-2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick Start Guide

MIC BOOSTER CT 1 / CM-1 / CM-2

Thank you for purchasing a Klark Teknik Mic Booster! These compact units add signicant gain boost to your passive microphone signal to

ensure strong, clear delivery to a mixing board, preamplier or interface.

*note – the CT 1 can also be connected directly to most microphones

Setup Procedure

Warning – either mute the mixer channel, lower the volume all the way, or turn o the speaker system before making connections.

1. Connect a fairly short balanced XLR cable (<30 feet) from the microphone to the input of your Mic Booster. Note that phantom power

cannot be passed to condenser mics, and therefore they shouldn't be used along with a mic booster unit.

2. Connect the output of the Mic Booster to a mixer, preamp, or interface via balanced XLR cable. Long cable runs can be used for

this connection if necessary, but high quality XLR cables with low capacitance are recommended to avoid high frequency degradation.

3. Engage phantom power on the mixer or other receiving equipment.

4. Check the gain setting on the receiving channel of your mixer or interface since the signal will be much greater than typical mic levels.

OutputInput

Dynamic or

passive ribbon

microphone

CT 1, CM-1, or CM-2

Mixer with phantom

power engaged

Product specificaties