Kioxia Exceria Handleiding
Kioxia Solid state drives (ssd) Exceria
Bekijk gratis de handleiding van Kioxia Exceria (30 pagina’s), behorend tot de categorie Solid state drives (ssd). Deze gids werd als nuttig beoordeeld door 91 mensen en kreeg gemiddeld 4.5 sterren uit 4 reviews. Heb je een vraag over Kioxia Exceria of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/30

1/30
Please be sure to check personal.kioxia.com/support/ for the latest rmware
updates.
SAFETY INSTRUCTIONS
Please refer to “Instruction Manual for Safety and Comfort”:
personal.kioxia.com/support/
Note: The following instructions are a general guideline for the SSD installation
and should act as a complement to your system’s owner manual.
LAPTOP INSTALLATION
1.Power o the system, disconnect all power cables, and remove the battery.
2.Locate the hard drive access panel; unscrew and remove the access panel.
3. Disconnect and remove the current storage drive from the drive bay
(refer to your system’s user manual)
4.Remove all brackets and connectors from your current storage drive and
install it on the SSD (if necessary).
Note: If a proprietary connector and/or bracket are present on the current
storage drive, carefully remove it and connect it to the SSD. Systems will
vary and these items may or may not be present.
5.Insert the SSD into the drive bay carefully aligning the SSD with the SATA*
connectors.
6.Secure the SSD in the drive bay. Reinstall the access panel and insert the
battery back into the system.
7.Power on your system to verify a successful installation. For a boot drive,
this is signied by the BIOS prompting OS installation. For a secondary
drive, follow the format instructions below.
Note: If the SSD will be your primary boot drive, please refer to your
operating system’s user manual for further OS installation instructions. If
this SSD will be used as a secondary drive, formatting the drive is required
before use.
*SATA 6Gbit/s is backwards compatible with SATA 3Gbit/s. However,
connecting a SATA 6Gbit/s device into a SATA 3Gbit/s connection will
result in reduced performance.
SATA SSD
Quick Start Guide
TC000G0
Product specificaties
| Merk: | Kioxia |
| Categorie: | Solid state drives (ssd) |
| Model: | Exceria |
| Gewicht: | 45.5 g |
| Breedte: | 70.1 mm |
| Diepte: | 100.45 mm |
| Hoogte: | 7.2 mm |
| Interface: | SATA III |
| Temperatuur bij opslag: | -40 - 85 °C |
| SSD capaciteit: | 240 GB |
| SSD-vormfactor: | 2.5" |
| Mean time between failures (MTBF): | 1500000 uur |
| Type geheugen: | TLC 3D NAND |
| Vermogensverbruik (avg): | 1.6 W |
| Operating voltage: | 5 V |
| Leessnelheid: | 555 MB/s |
| Schrijfsnelheid: | 540 MB/s |
| Component voor: | Notebook |
| Overdrachtssnelheid: | 6 Gbit/s |
| Schokbestendigheid: | 1500 G |
| Trillingen, in bedrijf: | 20 G |
| Bedrijfstemperatuur (T-T): | 0 - 65 °C |
| Code geharmoniseerd systeem (HS): | 84717070 |
| Hardware encryptie: | Nee |
| NVMe: | Nee |
| Random read (4KB): | 79000 IOPS |
| Random write (4KB): | 87000 IOPS |
| TRIM support: | Ja |
| Stroomverbruik (idle): | 1.6 W |
| TBW-classificatie: | 60 |
| DevSlp (apparaat in slaapstand) ondersteuning: | Ja |
Heb je hulp nodig?
Als je hulp nodig hebt met Kioxia Exceria stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Solid state drives (ssd) Kioxia
11 November 2024
23 Oktober 2022
23 Oktober 2022
Handleiding Solid state drives (ssd)
Nieuwste handleidingen voor Solid state drives (ssd)
15 Februari 2026
12 Januari 2026
11 November 2025
10 November 2025
7 November 2025
30 September 2025
29 September 2025
29 September 2025
9 Augustus 2025
9 Augustus 2025