Kicker TRHDP Handleiding

Bekijk gratis de handleiding van Kicker TRHDP (1 pagina’s), behorend tot de categorie Hifi systeem. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 4.5 sterren uit 4 reviews. Heb je een vraag over Kicker TRHDP of wil je andere gebruikers van dit product iets vragen? Stel een vraag

INSTRUCTIO N SHEET

HARLEY DAVIDSON AUDIO PROGRAMMER

HARLEY DAVIDSON AUDIO PROGRAMMER

INCLUDED COMPONENTS:

QUESTIONS?

EMAIL:

(1) Programmer module

(1) USB Cable

(1)Diagnostic Connection Cable

(1) Download Instructionssupport@kicker.com

CALL:

(1)800.256.0808

ext. 6007

NOTE 1:

In order to utilize the Kicker Audio Module, the stock ECM MUST be used. For motorcycles with:

NOTE 2:

MUST BE CONNECTED TO THE INTERNET

Stock ECM: Follow the provided instructions with the Audio Module

Power Commander: Disconnect the Power Commander from the ECM circuit. Reconnect the ECM to the stock harness plug and then

follow the provided instructions with the Audio Module

Any Aftermarket ECM:

Disconnect your aftermarket ECM and install your stock ECM to the bike harness. Follow the provided

instructions with the Audio Module. (For some ECMs this will mean reinitializing the aftermarket ECM when it is reinstalled)

INSTALLING THE SOFTWARE FOR A FIRST TIME USER

1.

Download

software program from

http://technoresearch.com/index.php/support/

downloads

2.

Once the download completes,

Run

software installer

3.

Connect

yourKickerprogram module to your computerusing

supplied USB cable

4.

From the Icon on your desktop

Start the Centurion

software

5.

Allowsoftware toupdat

1

e,accepttermsand conditions

anselectto launchogram d language pr

PROGRAMMING LIKE A PRO

1.

Remove side cover from left side of bike andlocate the

bottom 6 pin diagnostic plug

2.

Connect your programmer the bike

3.

Turn ignition switch to the Accessory position

4.

Launch program

5.

To connect to the bike, select the icon with two arrows

facing each other

6.

Once connected to the bike, select the icon with the

Wrench on it

7.

You a -willnowseedropdown menu.Fromthismenu

you can readandresetDTC’s,andcomplete

programing for adding Kicker Audio upgrade kits.

2 SPEAKER FRONT KIT

If you are installing a 2 speaker/single amp kit complete the

following:

1.

Select Radio speaker programing

2.

Select 2 Speakers- Front Speaker Kit

3.

Select Program Speaker

a.

Follow onscreen directions, complete and look for Pass

on the menu

4.

Select from the drop-d o w n menu: Radio Front Rear amp

5.

Sel

ect

F

r

ont

and

Sta

r

5

t

a.

Click enable and flash

b.

Follow the onscreen directions (confirm Pass)

6.

Exit the program

4 SPEAKER FRONT AND REAR KIT

If you are installing both front and rear kits complete the

following:

1.

Select Radio speaker programing

2.

Select 4 Speakers- Front and Rear Speaker Kit

3.

Select Program Speaker

a.

Follow onscreen directions, complete and look for Pass

on the menu

4.

Select from the drop-d o w n menu: Radio Front Rear amp

5.

Select Front and Start

a.

Click enable and flash

b.

Follow the onscreen directions (confirm Pass)

6.

Repeat again for Rear Amp

7.

Exit the program

KICKERWWW.KICKER.COM // 1/1

V3 4-2-18

Product specificaties