Kicker SX650.1 Handleiding

Kicker Autoradio SX650.1

Lees hieronder de 📖 handleiding in het Nederlandse voor Kicker SX650.1 (20 pagina's) in de categorie Autoradio. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
3
SX .1 Series Amplifiers
Features
Features
Low Impedance Operation Stable into 2 ohm
(SX650.1) or 1 ohm (SX1250.1) mono loads.
SORT Protection Circuitry (S Ohort circuit, ver-voltage,
Reverse polarity, hermal) Protects amplifier from accidentsT
and out of spec operation.
MOSFET Power Supply Provides high efficiency
operation.
PAST ( mp ignal Pre A S Transfer) Output RCA jacks to pass the
incoming signal to another amplifier or component.
Class D High efficiency Class D design for maximum output
power with minimal current draw.
Amp Strapping Allows you to combine two like models
together for double the power at double the impedance!
Low Pass Filter Fully adjustable digital crossover with
variable slope and crossover frequency. 30 Hz - 200 Hz in 1 Hz
increments. OFF - 48 dB per octave slope in 6 dB increments.
High Pass Filter Fully adjustable digital crossover with
variable slope and crossover frequency. 10 Hz - 60 Hz in 1 Hz
increments. OFF - 24 dB per octave slope in 6 dB increments.
KickEQ Fully adjustable single band digital parametric equal-
izer with variable Q (bandwidth), variable center frequency and
variable boost or cut. Q range .5 - 10 in .5 steps. Center
frequency 20 Hz - 200 Hz in 1 Hz steps. Boost or cut range +/-
18 dB.
Adjustable Phase The output phase (polarity) can be set
at 0 Degrees or 180 Degrees.
UltraMatch Gain Structure Digital input gain control
with five selectable gain ranges (1 volt, 2 volt, 4 volt, 8 volt, 16
volt) with 12 dB of adjustment in each range in .5 dB steps.
SickBay and On Board Diagnostics Various tools to
troubleshoot installation issues and check amp status.
Kompressor A 4-setting, user-selectable bass compressor
used to fatten up your sub bass. OFF, RED-LINE, CONTOUR and
ATTACK with +/- 24 dB of adjustment to compensate for
speaker size or listening style.
ISIS I S I S(pronounced eye-sis) ( ndicate tatus & nput ettings)
The user interface to view or adjust current settings and check
the status of your Kicker SX amplifier.
BLAST Port (B L A S Tass evel nd ignal ransfer) Provides
Remote Bass Level Control and control signal transfer
between multiple SX amplifiers.
EndKaps Cast aluminum, custom, removable covers to pro-
tect and hide all your wiring connections to the amplifier. Can
be prepped and painted any custom color you choose.
SASA (S A Shake tick A ) t So many more features...it is more
than you can Shake A Stick At. (It’s an Oklahoma thing!) Read
on to find out!
2SX .1 Series Amplifiers
Introduction
SX650.1 / SX1250.1
SX .1 Series
Amplifier
Owners Manual
Mono-Block Models:
Attention:
Please take a moment and record the information
asked for below in the provided area. It is also a good
idea to attach the original sales receipt or a copy of it to
this page for future reference
If for any reason you require service on this amplifier
during the warranty period, you will need to provide this
information and a copy of the receipt to Kicker to vali-
date your warranty.
ALWAYS KEEP YOUR RECEIPT!
Dealer Where Purchased:
Purchase Date:
Amplifier Model Number:
Amplifier Serial Number:
Congratulations!
You have just purchased the latest in amplifier
technology to carry the famous KICKER name.
Your KICKER SX series amplifier employs the lat-
est in DSP signal processing to give you total
control over your sound. Like all KICKER prod-
ucts it is designed and built to give you years
of powerful and trouble-free performance.
This installation manual contains valuable infor-
mation on how to get the most out of your
new SX series amplifier.
Thanks for buying KICKER. Enjoy!
_____________________________________________
_____________________________________________
_____________________________________________
_____________________________________________
5
SX .1 Series Amplifiers
Features
VFD DISPLAY - cont
GAIN - Indicates you are in the gain menu.
EQ - Indicates you are in the equalizer menu.
LPF - Indicates you are in the low pass filter menu.
HPF - Indicates you are in the high pass filter menu.
PHASE - Indicates you are in the phase menu.
KOMP - Indicates you are in the Kompressor menu.
MEM-1 - Memory preset 1 activated.
MEM-2 - Memory preset 1 activated.
MEM-3 - Memory preset 1 activated.
MEM-4 - Memory preset 1 activated.
KEYPAD
The keypad consists of nine buttons that allow you to adjust
your amplifier.
M1 - Used to select memory preset 1 or to store cur-
rent settings into preset 1.
M2 - Used to select memory preset 2 or to store
current settings into preset 2.
M3 - Used to select memory preset 3 or to store
current settings into preset 3.
M4 - Used to select memory preset 4 or to store
current settings into preset 4.
ESC - Used to exit the current menu.
ENT - Used to enter the selected menu.
HOME - Used to return to the Main menu and
other functions explained later.
UP - Used to advance up through menu selections
and/or adjust amplifier controls.
DOWN - Used to advance down through menu
selections and/or adjust amplifier controls.
These controls and their usage will be explained later with
more detail in each menu usage section.
ESC
M2
M3
M4
ENT
HOME
M1
4SX .1 Series Amplifiers
Features
ISIS VFD Display
SYS
MEM-1
GAIN EQ LPF HPF KOMP
AMP1
LOCK
MEM-2 MEM-3 MEM-4
PHASE
MUTE
AMP2
LEFT RIGHT
* * kicker
Meet the interface (Indicate Status & Input Settings).ISIS
The ISIS (pronounced eye-sis) allows you to view the cur-
rent conditions and settings of your amplifier as well as
change the many user-adjustable settings.The ISIS system
consists of the VFD (Vacuum Fluorescent Display) and the nine
soft touch buttons that make up the KEYPAD.
M1 M2 M3 M4
ESC ENTHOME
SYS
MEM-1
GAIN EQ LPF HPF KOMP
AMP1
LOCK
MEM-2 MEM-3 MEM-4
PHASE
MUTE
AMP2
LEFT RIGHT
* * kicker
ISIS
VFD
ISIS
KEYPAD
Here is a brief description of the indicators found on the
VFD.
AMP1 - Indicates amplifier 1 is selected for adjustment. Only
available in four channel amps.
AMP2 - Indicates amplifier 2 is selected for adjustment.
Only available in four channel amps.
LOCK - Indicates the amplifier controls are locked out and
not usable.
LEFT - Indicates an action or adjustment of the left channel.
SYS - Indicates you are in the system menu.
RIGHT - Indicates an action or adjustment of the right
channel.
MUTE - Indicates you are in the mute menu or the mute
function is active.

Product specificaties

Merk: Kicker
Categorie: Autoradio
Model: SX650.1

Heb je hulp nodig?

Als je hulp nodig hebt met Kicker SX650.1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Autoradio Kicker

Kicker

Kicker X50 Handleiding

2 Juni 2023
Kicker

Kicker zx 350 2 Handleiding

2 Juni 2023
Kicker

Kicker KX 400.4 Handleiding

2 Juni 2023
Kicker

Kicker ZX 300.1 Handleiding

2 Juni 2023
Kicker

Kicker kx 600 1 Handleiding

2 Juni 2023
Kicker

Kicker zr 120 Handleiding

2 Juni 2023
Kicker

Kicker KX 800.4 Handleiding

2 Juni 2023
Kicker

Kicker KX 550.2 Handleiding

2 Juni 2023
Kicker

Kicker zx 550 3 Handleiding

2 Juni 2023
Kicker

Kicker ix 404 impulse Handleiding

2 Juni 2023

Handleiding Autoradio

Nieuwste handleidingen voor Autoradio

Alpine

Alpine SWC-W84CRA2 Handleiding

9 April 2024
Alpine

Alpine SWC-D84DU Handleiding

9 April 2024
DLS

DLS CAD15 Handleiding

5 April 2024
DLS

DLS A3 Ultimate Handleiding

5 April 2024
DLS

DLS CAD11 Handleiding

5 April 2024
DLS

DLS RA40 Handleiding

5 April 2024
Macrom

Macrom SP2.050 Handleiding

31 Maart 2024
Macrom

Macrom M-DVD7601 Handleiding

31 Maart 2024
Macrom

Macrom M3A.250 Handleiding

31 Maart 2024
Macrom

Macrom Syn Power 4.050 Handleiding

31 Maart 2024