Kicker Solo-Baric DS10L5 Handleiding

Kicker Subwoofer Solo-Baric DS10L5

Lees hieronder de đź“– handleiding in het Nederlandse voor Kicker Solo-Baric DS10L5 (4 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
L5
SOLO-BARICSUBWOOFER
S , S , S , S15L5 12L5 10L5 8L5
©2006 Stillwater Designs
WiringOptions
Solo-Baric subwoofers are available with dual 2 voice coils. Both coils must beΩ(ohm) or dual 4Ω
connected to a source of amplification. The dual 2Ωwoofer will generate a 1 load if the coils areΩ
wired in parallel or a 4Ωload in series. The dual 4 woofer will provide a 2Ω Ω load wired in parallel or
8Ωload wired in series. The terminals with the white dots are for the first voice coil. The terminals with
solid-red and solid-black markings are for the second voice coil. See Figures 1 and 2.
C IONF GURATION
SOLO BARICL5SUBWOOFER
S15L5 / S12L5 / S10L5 / S8L5
Models:
Solo-BaricL5Subwoofer
Owner’sManual
Congratulations on your
KICKER purchase
Please record your purchase
information and keep your sales
receipt for validation of warranty.
Authorized Kicker Dealer:
Purchase Date:
Subwoofer Model Number:
Subwoofer Serial Number:
_________________________
_________________________
_________________________
_________________________
Please allow two weeks of break-in time for the subwoofer to reach optimum bass performance.
23
INSTA ALL TION
ParallelWiring
SeriesWiring
Dual 2 Voice Coils = 4Ω Ω Load
Dual 4 Voice Coils = 8Ω Ω Load
Dual 2 Voice Coils = 1Ω Ω Load
Dual 4 Voice Coils = 2Ω Ω Load
F uig re 1
F u ig re 2
CutoutDimensions
SealedEnclosureApplications
The Solo-Baric generates more sound pressure than an equivalently-sized round speaker and excels
when used in the recommended sealed boxes. These sealed enclosure designs give the smoothest
response with increased energy at the lowest frequencies, 20 to 30Hz. These designs deliver massive
amounts of highly-accurate bass and can be driven with punishing levels of amplifier power.
The Solo-Baric high performance suspension system can operate in a larger sealed enclosure. This
maximum enclosure volume application is ideal for SQ (ultra sound quality) installations. The SQ
enclosure generates a very flat response curve and superbly extends the subbass response.
Solo-Baric woofers perform well in any size sealed enclosure between the Compact and SQ volume
recommendations. These systems will exhibit benefits of both designs: Compact produces high-impact
bass, and SQ generates low bass frequency protraction. Overall, the system will sound more like the
recommended enclosure design it is closest to in enclosure volume. These enclosure recommendations
have been calculated with the airspace inside the enclosure and include the displacement of the woofer.
All sealed-enclosure airspace should be filled to 50% loose poly-fil (polyester fiberfill) stuffing. Do not
make the airspace greater than the SQ, maximum enclosure volume, recommendation.
Model:
S8L5
S10L5
S12L5
S15L5
Sealed MaximumSQ ( E c o un l s reVolume)
.75 ft3(21.24L) Power Handling = 155W RMS
1.0 ft3(28.32L) Power Handling = 450W RMS
2.0 ft3(56.64L) Power Handling = 500W RMS
6.0 ft3(69.92L) Power Handling = 450W RMS
Sealed MinimumCompa tc ( E c o un l s reVolume)
.33 ft 3(9.34L) Power Handling = 180W RMS
.66 ft3(18.69L) Power Handling = 450W RMS
.88 ft3(24.92L) Power Handling = 600W RMS
1.5 ft3(42.48L) Power Handling = 750W RMS
Model:
Nominal Impedance [Zn], ohm [per coil]
Resonance Frequency [fs], Hz
Power Handling Watts, Peak (RMS)
Total Q-Factor [Qts]
Equivalent Volume [Vas], ft
3(L)
Outer Frame Dimension, in (cm)
Mounting Depth, in (cm)
S12L5
2 or 4
31.8
1200 (600)
.472
2.71 (76.74)
12 5/8 (32)
6 13/16 (17.3)
S10L5
2 or 4
33.3
900 (450)
.403
1.53 (43.34)
10 11/16 (27.1)
6 3/16 (15.7)
S8L5
2 or 4
46.3
600 (300)
.620
.446 (12.64)
8 13/16 (22.4)
4 3/4 (12.1)
S15L5
2 or 4
24.0
1500 (750)
.428
7.92 (224.36)
15 5/8 (39.7)
8 5/8 (21.9)
Measurements based on the 2 ohm dual voice coil models.
Performance
Model:
S8L5
S10L5
S12L5
S15L5
Panel B, in (cm)
10x8 (25.4x20.3)
12x10.5 (30.5x26.7)
13x11.5 (33x29.2)
16.5x11.5 (42x29.2)
Panel A, in (cm)
10x10 (25.4x25.4)
12x12 (30.5x30.5)
13x13 (33x33)
16.5x16.5 (42x42)
Volume, ft
3(L)
.33 (9.34)
.66 (18.69)
.88 (24.92)
1.50 (42.48)
Panel C, in (cm)
8x8.5 (20.3x21.6)
10.5x10.5 (26.7x26.7)
11.5x11.5 (29.2x29.2)
15x11.5 (38.1x29.2)
P m o d u hanel Di ensi ns forCompactSeale Enclosures sing 3/4” (1.9cm) t ick MDF:
F uig re 3
Coil 2 +
Coil 2 +
Coil 1 +
Coil 1 +
Coil 1 -
Coil 1 -
Coil 2 -
Coil 2 -
Amplifier -
Speaker
Connection
Amplifier -
Speaker
Connection
Amplifier +
Speaker
Connection
Amplifier +
Speaker
Connection
13 3/4”
(34.9cm)
9 5/16”
(23.7cm)
7 1/4”
(18.4cm)
S8L5
S 01 L5
S 21 L5
S15L5
S8L5 - 1.5” (38.1mm)
S10L5 - 1.5” (38.1mm)
S12L5 - 1.75” (44.5mm)
S15L5 - 1.7” (43.2mm)
CornerRadius:
A
B
C
F uig re 4
11 1/16”
(28.1cm)
13 3/4”
(34.9cm)
9 5/16”
(23.7cm)
7 1/4”
(18.4cm)
11 1/16”
(28.1cm)
Y
X
Z
4 5
INSTA ALL TION
INSTA ALL TION
VentedEnclosureApplications
Ported Solo-Barics? Absolutely...and with a vengeance! These enclosures incorporate massive slot-
loaded (rectangular) ports with ultra low air velocity for ground pounding street bass that will make your
“skin bounce on your bones!” These boxes are the enclosure of choice for outrageous street bass and
high performance SPL contests. If space is not a problem and you want to get the most from your
Solo-Baric, try one of these ported designs. You will not be disappointed.
The ported Compact design increases bass efficiency and fits in many space-limited applications.
Although it is the smallest recommended ported enclosure, the output from 30 to 80 Hz will be
considerably higher than that of any sealed box. The SPL / Deep Bass ported design has even more
output in this crucial frequency band.
The SPL / Deep Bass is the largest and most efficient enclosure design. The SPL / Deep Bass delivers
the sonic output needed to win SPL contests and it produces bass notes “all the way down to the
cella”. This design turns heads and jump starts your heart.
A Note on PowerHandlingCapacity
Solo-Baric subwoofers will handle massive amounts of power in any of the recommended enclosures,
minimum or maximum. The smaller enclosures are best for use in limited-space applications.
The larger recommended enclosures will yield slightly more bass at the lowest frequencies.
The listed Power Handling capacities assume that both voice coils are in use.
Always connect both coils in a dual voice-coil speaker.
Model:
S8L5
S10L5
S12L5
S15L5
Vented MaximumSPL/DeepBass ( E c o un l s reVolume)
1.0 ft3(28.3L) + port displacement
2 x 9.5” (5.1x24cm) port, 21.25” (54cm) long
Power Handling = 275W RMS
2.25 ft3(63.7L) + port displacement
3 x 11.25” (7.6x29cm) port, 18” (46cm) long
Power Handling = 450W RMS
3.25 ft 3(92L) + port displacement
3 x 13.25” (7.6x34cm) port, 14.5” (37cm) long
Power Handling = 600W RMS
6.0 ft3(170L) + port displacement
3.5 x 16.25” (8.9x41cm) port, 13.75” (35cm) long
Power Handling = 750W RMS
Vented MinimumCompa tc ( E c o un l s reVolume)
.66ft3(18.7L) + port displacement
1.5 x 9.5” (3.8x24cm) port, 19.25” (49cm) long
Power Handling = 275W RMS
1.25 ft3(35.4L) + port displacement
2.5 x 11.25” (6.4x29cm) port, 19.75” (50cm) long
Power Handling = 450W RMS
1.75 ft3(49.6L) + port displacement
2.5 x 13.25” (6.4x34cm) port, 22.5” (57cm) long
Power Handling = 600W RMS
3.0 ft
3(85L) + port displacement
2.5 x 16.25” (6.4x41cm) port, 19.5” (50cm) long
Power Handling = 750W RMS
BoxBuildingNotes
Use 3/4” (1.9cm) or thicker MDF (medium density fiberboard) and seal the joints with silicone. Use the
“template” inside your Solo-Baric’s shipping carton to mark the mounting hole, then cut directly on the
line. These designs need internal bracing. Add triangular bracing between each of the larger
unsupported panels. See Figure 5.
All the cubic feet (L) measurements in this manual include the displacement of the woofer. For the
vented enclosures the displacement of the port must be calculated and added to the internal volume of
the final design. Use the outer dimensions of the port and multiply “X x Y x Z”, convert to cubic feet, for
example the S12L5 vented compact design’s external port dimensions are, using 3/4” (1.9cm) MDF:
[ (13.25” + 1.5” total MDF wall thickness) x (2.5” + 1.5” total MDF wall thickness) x 22.5”] x (1 ft
3/ 1728
in3) = .77 ft3, and add this number to the internal volume of the enclosure, S12L5’s 1.75 ft3+ .77 ft3=
2.52 ft3. See Figure 6. Due to the necessary length of these ports, you may want to fold the port along
the bottom and back walls. It will be impractical to use round ports for these designs.
Do not install a port opening against a solid surface, such as an internal brace, back-panel or trunk wall,
seat or interior panel of your vehicle. The port opening must remain unobstructed. Use the smallest
dimension of the rectangular port as the minimum amount of space between the port opening and any
solid surface to insure unrestricted airflow.
If you prefer an ultra-smooth bass response, you should loosely fill your Solo-Baric enclosure with
poly-fil stuffing. Ported designs will require covering the end of the port (located inside the box) with grill
cloth, chicken wire, or expanded metal to prevent the poly-fil from exiting the port. The use of poly-fil
will slightly decrease efficiency, but will deepen and extend the low frequency output.
For more advice on box building, refer to your Authorized Kicker Dealer, or click on the tab onSupport
the Kicker homepage, www.kicker.com. Choose the Technical Manuals link and then download or view
the corresponding information. Please E-mail or call Technical Services support@kicker.com
(405) 624-8583 for specific or unanswered questions.
Note: The use of a subsonic filter will significantly increase the power handling.
The power handling specifications in these charts are calculated using a 25Hz, 24dB per octave subsonic filter.
D r S S 2 = 3 x 3 fo 15L5, 1 L5
D 2 2 r S 0 S = x fo 1 L5, 8L5
D
D
D
F uig re 5
SOLO BARICL5SUBWOOFER
F u ig re 6
The displac me ent of t eh port must be a e t t e l e t e cal late ancu d d dd d o h internal vo um of h final esign d .
Th , e dimensions for X Y, d d an Z may vary based on t e t i h h ckness of t eh material use to ma e t ek h port.

Product specificaties

Merk: Kicker
Categorie: Subwoofer
Model: Solo-Baric DS10L5

Heb je hulp nodig?

Als je hulp nodig hebt met Kicker Solo-Baric DS10L5 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Subwoofer Kicker

Kicker

Kicker 48CVTDF122 Handleiding

3 Juli 2023
Kicker

Kicker 48DCWR102 Handleiding

29 Juni 2023
Kicker

Kicker 48CWR82 Handleiding

28 Juni 2023
Kicker

Kicker 48DCWR122 Handleiding

26 Juni 2023
Kicker

Kicker C104 Handleiding

16 Juni 2023
Kicker

Kicker Hideaway HS10 Handleiding

15 Mei 2023
Kicker

Kicker 48TCWRT672 Handleiding

13 Mei 2023
Kicker

Kicker 48CWRT84 Handleiding

7 Mei 2023
Kicker

Kicker Q-Class 10L7 Handleiding

4 Mei 2023
Kicker

Kicker Comp Gold 12 Handleiding

4 Mei 2023

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer

RCF

RCF S 19 Handleiding

10 April 2024
RCF

RCF S 29 Handleiding

10 April 2024
KEF

KEF KC92 Handleiding

6 April 2024
Klipsch

Klipsch Reference Premiere RP-1200SW Handleiding

3 April 2024
Klipsch

Klipsch Reference Premiere RP-1000SW Handleiding

3 April 2024
Velodyne

Velodyne Deep Waves 10 Handleiding

27 Maart 2024
Klipsch

Klipsch PRO-1000SW Handleiding

27 Maart 2024
Totem

Totem KIN Sub Handleiding

27 Maart 2024
Velodyne

Velodyne Deep Waves 12 Handleiding

27 Maart 2024
Kanto

Kanto SUB8V Handleiding

27 Maart 2024