Kichler Lakum 43090CLP Handleiding

Bekijk gratis de handleiding van Kichler Lakum 43090CLP (3 pagina’s), behorend tot de categorie Lamp. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.2 sterren uit 8 reviews. Heb je een vraag over Kichler Lakum 43090CLP of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Date Issued: 09/11/17IS-43090-CB

We’re here to help 866-558-5706

Hrs: M-F 9am to 5pm EST

CAUTION – RISK OF SHOCK –

Disconnect Power at the main circuit breaker panel or main

fusebox before starting and during the installation.

1) Pass xture wire through desired amount of stems [1] and

screw stems together using supplied short threaded tubes [2].

NOTE: Thread locking compound must be applied to all stem

threads as noted with arrow symbol to prevent accidental rota-

tion of xture during cleaning, relamping, etc.

2) Pass xture wire through end of swivel [3] without threaded

pipe.Thread that end of swivel onto end of last stem.

NOTE: Direction of swivel in accordance with ceiling.

3) Pass xture wire through hole in canopy[4]. Pass threaded

pipe on end of swivel up through hole in canopy.

4) Pass xture wire through lockwasher [5] . Thread lockwasher

onto end of threaded pipe protruding from inside canopy.

5) Pass xture wire through hexnut [6]. Thread hexnut onto end

of threaded pipe.

6) Find the appropriate threaded holes on mounting strap [7]. As-

semble mounting screws [8] into threaded holes.

7) Attach mounting strap to outlet box [9]. Mounting strap can be

adjusted to suit position of xture.

8) Grounding instructions: (See Illus. A or B).

A) On xtures where mounting strap is provided with a

hole and two raised dimples. Wrap ground wire from

outlet box around green ground screw, and thread into

hole.

B) On xtures where a cupped washer is provided. Attach

ground wire from outlet box under cupped washer and

green ground screw, and thread into mounting strap.

If xture is provided with ground wire. Connect xture ground

wire to outlet box ground wire with wire connector. (Not pro-

vided.) After following the above steps. Never connect ground

wire to black or white power supply wires.

9) Make wire connections (connectors not provided.) Reference

chart below for correct connections and wire accordingly.

10) Push xture to ceiling, carefully passing mounting screws

through holes in canopy. NOTE: Be certain wires do not get

pinched between canopy and ceiling.

11) Use knobs [10] and lockwashers [11] to secure canopy.

Tighten to secure.

12) Carefully raise glass [12] to the xture. Slip the smaller open-

ing over the socket and t the glass against the housing [13].

13) Slip the wide end of the spacer [14] over the socket [15] and

press up against the inside of the glass.

14) Slip the wide end of the lower socket cover [16] over the

socket and press up against the spacer.

15) Thread socket ring [17] onto socket. Tighten socket ring with

socket ring tool [18] to secure glass in place. (DO NOT over

tighten.)

16) Insert recommended bulb. (Not supplied)

GREEN GROUND

SCREW

CUPPED

WASHER

OUTLETBOX

GROUND

FIXTURE

GROUND

DIMPLES

WIRE CONNECTOR

OUTLETBOX

GROUND

GREEN GROUND

SCREW

FIXTURE

GROUND

A

B

Connect Black or

Red Supply Wire to:

Connect

White Supply Wire to:

BlackWhite

*Parallel cord (round & smooth)*Parallel cord (square & ridged)

Clear, Brown, Gold or Black

without tracer

Clear, Brown, Gold or Black

with tracer

Insulated wire (other than green)

with copper conductor

Insulated wire (other than green)

with silver conductor

*Note: When parallel wires (SPT I & SPT II)

are used. The neutral wire is square shaped

or ridged and the other wire will be round in

shape or smooth (see illus.)

Neutral Wire

8

7

6

5

4

10

11

3

►

►

1

2

►

17

18

16

14

12

15

13

►

9

Product specificaties