Keurig K-Mini Go Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Keurig K-Mini Go (7 pagina's) in de categorie Koffiezetapparaat. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
Get the most from your
new Keurig® brewer
Use & Care Guide
K-Mini® Go
8 10
ADD WATE R DES CA LE
12
ST R O N G
8 10 12
ST R ON G
ADD WAT ER DES CALE
Before You Brew
Brew Your First Cup
Plug & Place
Remove packing tape from brewer.
Plug into an outlet.
Place a large mug (10oz minimum)
on the drip tray.
Cleansing Brew
The 3 cup sizes will blink. Press the 8oz
button, then press the blinking BREW
button to start a cleansing brew. Pour
the hot water into the sink.
Do not remove the water reservoir or
lift the handle once the BREW button
has been pressed until the brew has
completed. The one-time setup process is
now complete and you are ready to brew!
Lift & Lower
Lift and lower the handle. Do not
insert a K-Cup® pod. The brewer will
power on automatically.
Rinse & Fill
Remove the water reservoir lid, then lift
the reservoir straight up to remove it.
If you have a Keurig® Water Filter (sold
separately), install it now. Refer to your
Water Filter Starter Kit for instructions.
Rinse reservoir with fresh water and fill
to the MAX FILL line.
Replace water reservoir, making sure
the tank is seated properly in the base.
Replace lid.
NOTE: Do not use distilled water.
Brew & Enjoy!
The 3 brew size buttons will blink. Select
your brew size, then press the blinking
BREW BREW button. The button will
remain illuminated while brewing. Brewing
is complete when all the buttons are
illuminated. Lift the handle and dispose
of the K-Cup® pod. For a bolder brew, the
STRONG button may be turned on before
or after brew size is selected.
CAUTION: While brewing, there is extremely hot water in the
K-Cup® pod holder. To avoid injury, do not lift the handle during
the brewing process.
Place Mug & Pod
Place a mug on the drip tray. If using a
travel mug, remove the drip tray and
place the mug on the drip tray base.
Lift the handle and place a K-Cup®
pod in the K-Cup® pod holder. Lower
the handle completely to close the lid.
Do not remove the foil lid on the
K-Cup® pod.
1 2
3
5
4
6
8 10
ADD WATER DESCA LE
12
STRONG
Caring For Your Brewer
Brewer Exterior
Keep your Keurig® brewer looking
its best by cleaning the exterior
from time to time. Just clean with a
damp, soapy, lint-free, nonabrasive
cloth. Never immerse the brewer in
water or other liquids.
Drip Tray
The drip tray overflow should
be emptied and cleaned
occasionally. To remove, lift up
off brewer base, keeping it
level to avoid spilling. Rinse
and clean with a damp, soapy,
lint-free, nonabrasive cloth.
Hand-wash only.
Water Reservoir
The water reservoir should be
cleaned periodically by wiping the
inside of the reservoir and underside
of the lid with a damp, nonabrasive,
lint-free cloth. Do not dry the
inside of the water reservoir with
a cloth, as lint may remain. Allow
the reservoir to dry completely.
Hand-wash only.
Brewer Features
FAST & FRESH-BREWED: Coffee made in minutes.
STRONG BREW: For a bolder, more intense cup.
BACK-TO-BACK BREWING: Immediately brew a second cup; no
need to wait for reheating.
TRAVEL MUG FRIENDLY: Accommodates travel mugs up to 7” tall.
MAINTENANCE ALERT: Reminds you to descale after every 500
brews.
COMPATIBLE WITH THE MY K-CUP® UNIVERSAL REUSABLE
COFFEE FILTER: Brew your own ground coffee (sold separately).
AUTO OFF: Automatically turns your brewer off after a brew is
complete or after 5 minutes of inactivity for energy savings.
DESCALE MODE: Once in mode, follow guided process found in
the Use & Care Guide on support.keurig.com to effectively remove
scale from your brewer.
HIGH ALTITUDE: To ensure your coffee maker works properly at
higher altitudes (5,000 feet), please enable the High Altitude
Brewing Mode on your coffee maker.
1. Begin with the brewer plugged in and powered off.
2. Press and hold the button and button for 10oz STRONG
3 seconds. The 12oz button will illuminate to confirm that the
High Altitude Brewing Mode has been enabled.
3. High Altitude Mode will remain enabled until steps 1-2 are
repeated and the 12oz light turns off and the light turns on 8oz
to confirm that the High Altitude Brewing Mode is disabled.
HIGH ALTITUDE BREWING: While holding the brewer handle up,
push down slowly on the K-Cup® pod in the pod holder until the
bottom of the K-Cup® pod is punctured by the exit needle.
STRONG BREW MODE: Keeps the Strong feature on with
every brew.
With the brewer plugged in and powered off, press and hold the
STRONG button for 3 seconds (STRONG will blink twice).
To exit the mode, repeat the same steps.
To turn the Strong Mode off for a single brew, press the STRONG
button once until no longer illuminated.
Strong Mode will be reactivated for the next brew automatically.
8 10
ADD WATER DESC AL E
12
STRONG


Product specificaties

Merk: Keurig
Categorie: Koffiezetapparaat
Model: K-Mini Go

Heb je hulp nodig?

Als je hulp nodig hebt met Keurig K-Mini Go stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Koffiezetapparaat Keurig

Handleiding Koffiezetapparaat

Nieuwste handleidingen voor Koffiezetapparaat