Kettler Racer 7 Handleiding

Kettler Fietstrainer Racer 7

Lees hieronder de 📖 handleiding in het Nederlandse voor Kettler Racer 7 (16 pagina's) in de categorie Fietstrainer. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16

1011

A 155 cm

B 54 cm

C 132 cm

53 kg max.

130 kg

30 – 40 Min.

RUS

Montageanleitung Heimtrainer „RACER 7”

Art.-Nr. 07938-150

Abb. ähnlich

Auf 100% Altpapier gedruckt!

Handling the equipment

ATTENTION! It is not recommended to use or store the appa-

ratus in a damp room as this may cause it to rust. The friction

surface of the ﬂywheel is especially sensitive to the formation

of rust. Should this occur (e.g. after a prolonged period of disuse)

the rust should be removed using sandpaper or steel wool. Do

not use grease or oil! Please ensure that no part of the machine

comes in contact with liquids (drinks, perspiration etc.). This may

cause corrosion.

■Before using the equipment for exercise, check carefully to

ensure that it has been correctly assembled.

■Before beginning your ﬁrst training session, familiarize

yourself thoroughly with all the functions and settings of the

unit.

■The machine is designed for use by adults and children should

not be allowed to play with it. Children at play behave unpre-

dictably and dangerous situations may occur for which the manu-

facturer cannot be held liable. If, in spite of this, children are

allowed to use the equipment, ensure that they are instructed

in its proper use and supervised accordingly.

■A slight production of noise at the bearing of the centrifugal mass

is due to the construction and has no negative effect upon ope-

ration. Possibly occurring noise during reverse pedalling result

For Your Safety

RISK! Instruct people using the equipment (in particular children)

on possible sources of danger during exercising.

RISK! While assembly of the product keep off children’s reach

(Choking hazard - contains small parts).

RISK! Heart rate monitoring systems can be imprecise. Excessive

training may lead to serious health damage or death. If you feel

giddy or weak, please stop the training immediately.

WARNING! The training device should be used only for its

intended purpose, i.e. for physical exercise by adult people.

WARNING! Any other use of the equipment is prohibited and

may be dangerous. The manufacturer cannot be held liable for

damage or injury caused by improper use of the equipment.

WARNING! Before beginning your program of training, study

the instructions for training carefully.

WARNING! All electric appliances emit electromagnetic

radiation when in operation. Please do not leave especially

radiation-intensive appliances (e.g. mobile telephones) directly

next to the cockpit or the electronic controlsystem as otherwise

values displayed might be distorted (e.g. pulse measurement.

WARNING! After your training by all means turn the turning

handle for brake adjustment back to zero position in order to

avoid heat inﬂuences on brake linings and disk ﬂywheel.Pay

attention to the fact that the quickly rotating disk ﬂywheel

strongly heats during operation.

WARNING! This training device is for home use only.

■Exercise has been designed in accordance with the latest stan-

dards of safety. Any features which may have been a possible

cause of injury have been avoided or made as safe as possible.

■Incorrect repairs and structural modiﬁcations (e.g. removal or

replacement of original parts) may endanger the safety of the

user.

■Damaged components may endanger your safety or reduce the

lifetime of the equipment. For this reason, worn or damaged parts

should be replaced immediately and the equipment taken out

of use until this has been done. Use only original KETTLER

spare parts.

■If the equipment is in regular use, check all its components

thoroughly every 1 -2 months. Pay particular attention to the

tightness of bolts and nuts.This applies especially to the securing

bolts for saddle and handelbars.

■To ensure that the safety level is kept to the highest possible

standard, determined by its construction, this product should

be serviced regulary (once a year) by specialist retailers.

■Before beginning your program of exercise, consult your doctor

to ensure that you are ﬁt enough to use the equipment. Base your

program of exercise on the advice given by your doctor. Incorrect

or excessive exercise may damage your health!

■Any interference with parts of the product that are not described

within the manual may cause damage, or endanger the person

using this machine. Extensive repairs must only be carried out

by KETTLER service staff or qualified personnel trained by

KETTLER.

■Our products are subject to a constant innovative quality assurance.

We reserve the right to perform technical modiﬁcations.

■In case of enquiry, please contact your KETTLER dealer.

■In choosing the location of the apparatus, ensure a sufﬁcient safety

distance from any obstacles. The apparatus must not be mounted

in the immediate vicinity of main passageways (paths, doorways,

corridors). The safety distance surrounding must extend at least

1 meter further than the practice area.

■This training device has to be set up on a horizontal surface under

all circumstances. Place rubber or straw mats under it to deaden

any noise or impacts. Only for appliances with weights. Avoid

powerful oscillations of the dumbbells!

■When mounting the product please take the recommended

torque information into account (M = xx Nm).

■The exercise cycle complies with the DIN EN 957 - 1/5, class

HC. It is therefore unsuitable for therapeutic use.

Assembly Instructions

Before assembling or using the exercise cycle , please read the following instructions carefully. They

contain important information for use and maintenance of the equipment as well as for your

personal safety. Keep these instructions in a safe place for maintenance purposes or for ordering

spare parts.

Instructions for Assembly

RISK! Ensure that your working area is free of possible sources

of danger, for example don’t leave any tools lying around.

Always dispose packaging material in such a way that it may

not cause any danger. There is always a risk of suffocation if

children play with plastic bags!

■Ensure that you have received all the parts required (see check

list) and that they are undamaged. Should you have any cause

for complaint, please contact your KETTLER dealer.

■Before assembling the equipment, study the drawings carefully

and carry out the operations in the order shown by the diagrams.

The correct sequence is given in capital letters.

■The equipment must be assembled with due care by an adult

person. If in doubt call upon the help of a second person, if pos-

sible technically talented.

■Please note that there is

always

a danger of injury when

working with tools or doing manual work. Therefore please be

careful when assembling this machine.

■The fastening material required for each assembly step is shown

in the diagram inset. Use the fastening material exactly as

instructed.

■Bolt all the parts together loosely at ﬁrst, and check that they

have been assembled correctly. Tighten the locknuts by hand

until resistance is felt, then use spanner to finally tighten nuts

completely against resistance (locking device). Then check that

all screw connections have been tightened ﬁrmly. Attention:

once locknuts have been unscrewed they no longer function cor-

rectly (the locking device is destroyed), and must be replaced.

■For technical reasons, we reserve the right to carry out prelim-

inary assembly work (e.g. addition of tubing plugs).

List of spare parts page 34-35

When ordering spare parts, always state the full article number,

spare-partnumber, the quantity required and the S/N of the product

(see handling).

Example order: Art.no. 07938-150 / spare-part no. 10100030

/ 2 pieces / S/N ....................

Please keep original packaging of this article, so that it may be

used for transport at a later date, if necessary.

Goods may only be returned after prior arrangement and in

(internal) packaging, which is safe for transportation, in the original

box if possible.

It is important to provide a detailed defect description / damage

report!

Important: spare part prices do not include fastening material; if

fastening material (bolts, nuts, washers etc.) is required, this should

be clearly stated on the order by adding the words „with fastening

material“.

Waste Disposal

KETTLER products are recyclable. At the end of its useful life please

dispose of this article correctly and safely (local refuse sites).

KETTLER GB Ltd.

Kettler House, Merse Road

North Moons Moat

Redditch, Worcestershire B98 9HL

+44 1527 591901 +44 1527 62423

www.kettler.co.uk Mail: sales@kettler.co.uk

KETTLER International Inc.

1355 London Bridge Road +1 888 253 8853

Virginia Beach, VA 23453 +1 888 222 9333

www.kettlerusa.com

USA

from engineering and are absolutely safe.

■Use for your regular cleaning, maintenance and care our

appliance maintenance set (Article no. 07921-000) speciﬁcally

licensed for KETTLER Sports apparatus and available from

the Sport specialized trade.

■To operate correctly, the pulse function requires a minimum

voltage of 2,7 volts (only for computers working with batteries).

■The equipment is dependent of revolutions per minute.

■Please ensure that liquids or perspiration never enter the machine

or the electronics.

■Before use, always check all screws and plug-in connections as

well as respective safety devices ﬁt correctly.

■Always wear suitable shoes when using.

■Nobody may be in the moving range of a training person during

training.

■After your training by all means turn the turning handle for brake

adjustment back to zero position in order to avoid heat inﬂuences

on brake linings and disk ﬂywheel.

■For a comfortable training position please adjust the handlebar

andsaddle position to your body height.

■The brake linings should also be checked at regular intervals

and adjusted as necessary.

Product specificaties

Merk:	Kettler
Categorie:	Fietstrainer
Model:	Racer 7
Kleur van het product:	Black,White
Gewicht:	53000 g
Breedte:	533 mm
Diepte:	1321 mm
Hoogte:	1270 mm
Aantal programma's:	8
Gewicht vliegwiel:	18140 g
Standaard hartslag meter:	Chest belt,Ear sensor
Zadel verstelling:	Verticaal