Kenwood Triblade HM400 Handleiding

Kenwood Niet gecategoriseerd Triblade HM400

Lees hieronder de 📖 handleiding in het Nederlandse voor Kenwood Triblade HM400 (61 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 97 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/61
English 2 - 4
Nederlands 5 - 7
Français 8 - 10
Deutsch 11 - 13
Italiano 14 - 16
Português 17 - 19
Español 20 - 22
Dansk 23 - 25
Svenska 26 - 28
Norsk 29 - 31
Suomi 32 - 34
Türkçe 35 - 37
Ïesky 38 - 40
Magyar 41 - 43
Polski 44 - 46
Русский 47 - 49
Ekkgmij 50 - 53
Slovenčina 54 - 56
Українська 57 - 59
Head Office Address:
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK
www.kenwoodworld.com
Designed and engineered by Kenwood in the UK
Made in China 19539/1
HM400 series
´¸∂w
06 16-
UNFOLD
before using your Kenwood
appliance
Read these instructions carefully and
retain for future reference.
Remove all packaging and any
labels.
safety
Ensure the cord is fully unwound
before using the mixer.
Never put the mixer body in water or
let the cord or plug get wet.
Never leave the mixer on
unattended.
Never operate the mixer in the raised
position.
Never exceed the maximum
capacities.
Keep fingers, hair, clothing and
utensils away from moving parts.
Never let the cord touch hot
surfaces or hang down where a
child could grab it.
Never use a damaged mixer. Get it
checked or repaired: see 'service
and customer care'.
Never use an unauthorised
attachment.
Always unplug the appliance when
not in use, before fitting or removing
parts or before cleaning.
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
Children should be supervised to
ensure that they do not play with the
appliance.
Only use the appliance for its
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper use,
or failure to comply with these
instructions.
before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of your mixer.
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using your mixer for
the first time
Wash the parts (see 'cleaning').
key
eject button
5 speed control
mixer body
mixer cradle
release/locking button
mixer stand
mixing bowl
beaters
kneaders (if supplied)
to use your mixer
1 Attach the mixer to the stand by
placing the mixer on top of the
cradle and pushing down to locate.
.
To remove the mixer, steady the
cradle with one hand whilst lifting the
mixer free with the other.
2 Push in the release/locking button
and swing the mixer upwards on the
stand .
3 Insert the beaters or kneaders into
the mixer ensuring that they are
fitted to the correct outlet. The
beater fitted with the plastic drive
button must fit into the outlet marked
with the corresponding dot .
Likewise the kneader with the larger
metal disc must also be inserted into
this outlet.
The beaters or kneaders can only be
fitted or removed when the speed
control is in the off (0) position.
English
2
 
4 Place the food to be mixed into the
bowl, and then place the bowl onto
the mixer stand.
5 Press the release/locking button and
at the same time lower the mixer.
6 Plug the mixer into the power supply.
7 Operate the mixer by moving the 5
speed control switch to the
appropriate mixing speed. As you
push the button forward, the speed
will increase (the speeds are
indicated by markings adjacent to
the
).
Remember as you increase the
speed you automatically increase the
power. As the mixture becomes
heavier, increase the power by
turning to a higher speed. If the
machine starts to labour on a low
speed turn to a higher speed.
On some occasions depending upon
the quantity and consistency of the
mixture in the bowl, some assistance
may be required to help the bowl
revolve. Generally the bowl will
rotate clockwise, but certain
mixtures may cause an anticlockwise
rotation.
It is important to note that when
using the mixer on the stand, it will
be necessary to scrape down the
sides and across the bottom of the
bowl at regular intervals to assist
with the mixing operation.
8 After use switch off and disconnect
the mixer from the power supply.
9 To eject the beater/kneaders push in
the release/locking button and raise
the mixer upwards. Hold the
beater/kneader shafts whilst
pressing the eject button.
Note: If you wish to mix larger
quantities and heavier mixes it is
recommended that the mixer be
removed from the stand and held in
a suitably sized container.
cleaning
Always switch off, unplug and
remove the beaters or kneaders
before cleaning.
Never put the mixer body in water or
let the cord or plug get wet.
Never use abrasives to clean parts.
beaters, kneaders
Wash by hand or in your dishwasher,
then dry.
mixer body and stand
Wipe with a dry to slightly damp
cloth then dry.
service and customer
care
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
using your mixer or
servicing or repairs
Contact the shop where you bought
your mixer.
Designed and engineered by
Kenwood in the UK.
Made in China.
3


Product specificaties

Merk: Kenwood
Categorie: Niet gecategoriseerd
Model: Triblade HM400

Heb je hulp nodig?

Als je hulp nodig hebt met Kenwood Triblade HM400 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Kenwood

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd