Kenwood CMOS 200 Handleiding

Kenwood Achteruit rij camera CMOS 200

Lees hieronder de 📖 handleiding in het Nederlandse voor Kenwood CMOS 200 (100 pagina's) in de categorie Achteruit rij camera. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/100

CMOS-300

CMOS-200

UNIVERSAL MULTI-VIEW CAMERA/ UNIVERSAL REAR VIEW CAMERA

INSTRUCTION MANUAL

CAMÉRA MULTI-VUES UNIVERSELLE/ CAMÉRA DE RECUL UNIVERSELLE

MODE D’EMPLOI

UNIVERSAL MULTIVIEW-KAMERA/ UNIVERSAL RÜCKFAHRKAMERA

BEDIENUNGSANLEITUNG

UNIVERSELE MULTIVIEWCAMERA/ UNIVERSELE ACHTERUITRIJCAMERA

GEBRUIKSAANWIJZING

TELECAMERA MULTIVISIONE UNIVERSALE/ TELECAMERA PER RETROMARCIA UNIVERSALE

ISTRUZIONI PER L’USO

CÁMARA DE MULTIVISIÓN UNIVERSAL/ CÁMARA DE VISTA TRASERA UNIVERSAL

MANUAL DE INSTRUCCIONES

CÂMARA MULTIVISÃO UNIVERSAL/ CÂMARA TRASEIRA UNIVERSAL

MANUAL DE INSTRUÇÕES

Take the time to read through this instruction manual.

Familiarity with installation and operation procedures will help you obtain the best

performance from your new Universal Camera.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the

warranty card, and in the space provided below. Refer to the model and serial numbers

whenever you call upon your Kenwood dealer for information or service on the product.

Model CMOS-300/CMOS-200 Serial number

US Residence Only

www.Kenwoodusa.com

2 | CMOS-300/CMOS-200

above because of the danger of malfunction due to high

temperatures.)

• Before drilling any mounting holes always check behind

where you want to drill the holes. Do not drill into the gas

line, brake line, electrical wiring or other important parts.

• If this unit is installed in the passenger compartment, anchor

it securely so it does not break free while the car is moving,

and cause injury or an accident.

• If this unit is installed under a front seat, make sure it does not

obstruct seat movement. Route all leads and cords carefully

around the sliding mechanism so they do not get caught or

pinched in the mechanism and cause a short circuit.

Care and maintenance

• When the product gets dirty, wipe dry with a silicon cloth or

soft cloth. If it is seriously stained, remove stain with a cloth

moistened with a neutral cleaner and then wipe the cleaner

away. Do not use a hard cloth and/or a volatile substance

such as lacquer thinner or alcohol, scratches, deformation,

degradation and/or damage may result.

• When a lens component gets dirty, wipe gently with a soft

clock moistened with water. Do not rub with a dry cloth to

prevent scratching the lens.

Installation Procedure

1 To prevent a short circuit, remove the key from the

ignition and disconnect the - battery.

2 Make the proper input and output wire connections

for each unit.

3 Connect the wiring harness wires in the following

order: ground, ignition, reverse and camera unit.

4 Connect the wiring harness connector to the power

supply box unit.

5 Install the unit in your car.

6 Reconnect the - battery.

2WARNING

• If you connect the ignition wire (Red) to the car chassis

(Ground), you may cause a short circuit, that in turn may

start a ﬁ re. Always connect those wires to the power source

running through the fuse box.

• Do not cut out the fuse from the ignition wire (Red). The

power supply must be connected to the wires via the fuse.

2CAUTION

• If your car’s ignition does not have an ACC position, connect

the ignition wires to a power source that can be turned on

and oﬀ with the ignition key. If you connect the ignition wire

to a power source with a constant voltage supply, as with

battery wires, the battery may die.

• If the fuse blows, ﬁ rst make sure the wires aren’t touching to

cause a short circuit, then replace the old fuse with one with

the same rating.

2WARNING

To prevent injury or fire, take the following

precautions:

• To prevent a short circuit, never put or leave any metallic

objects (such as coins or metal tools) inside the unit.

• Installation and wiring of this product require specialist

skill and experience. To assure your safety, please request a

specialist technician to install the unit.

2CAUTION

To prevent damage to the product, take the

following precautions:

• Make sure to ground the unit to a negative 12V DC power

supply.

• When replacing a fuse, only use a new fuse with the

prescribed rating. Using a fuse with the wrong rating may

cause your unit to malfunction.

• Do not use your own screws. Use only the screws provided. If

you use the wrong screws, you could damage the unit.

NOTE

• This product is a rear view camera for checking the view at

the rear of a car.

• A rear view camera is a camera that provides symmetrical

images in the same way as rear and side view mirrors.

• Connection to a TV with an RCA video input is possible,

but conﬁ rm whether the TV you use has a reverse gear

connection function.

• This product is designed to supplement the driver’s rear

view, but the camera images do not show all dangers and

obstacles. Be sure to look behind you when reversing to

conﬁ rm the view.

• This product features a wide-angle lens, so the near view

is wide and the far view is narrow, which may create a false

sense of distance. Be sure to look behind you when reversing

to conﬁ rm the view.

• Do not wash your car with an automatic car wash or high-

pressure water as it may result in water entering the camera

or the camera falling oﬀ .

• Check camera bracket installation before driving.

Are the screws loose?

- Is the camera bracket ﬁ rmly secured?

- If the rear view camera comes loose while you are driving it

may cause an accident.

• Before ﬁ nally installing the unit, connect the wiring

temporarily, making sure it is all connected up properly, and

the unit and the system work.

• When mounting this unit, make sure none of the leads are

trapped between this unit and the surrounding metalwork or

ﬁ t t i n g s .

• Do not mount this unit near the heater outlet, where it would

be aﬀ ected by heat, or near the doors, where rainwater

might splash onto it. (Never install in locations such as the

Before Use/ Installation Procedure

English | 3

• Insulate unconnected wires with vinyl tape or other similar

material. To prevent a short circuit, do not remove the caps

on the ends of the unconnected wires or the terminals.

• After the unit is installed, check whether the brake lamps,

blinkers, wipers, etc. on the car are working properly.

• Install so that it does not obstruct the rear ﬁ eld of view.

• Install so that it does not protrude from the side of the car.

• Do not perform installation in rain or fog.

• When humidity is high, dry the surface to which the unit is to

be attached before installing.

• Moisture on the attachment surface reduces adhesive

strength, which may lead to the unit coming oﬀ .

• Do not attach the camera bracket to areas on the car body

treated with ﬂ uorocarbon resin, or glass.

• May result in the rear view camera falling oﬀ .

- Do not apply water to the unit.

- Do not expose the unit to rain.

- Do not subject the camera to unnecessary force.

- Thoroughly clean where tape is used for sticking on the

unit.

• Refer to the Instruction’s manual for details on connecting

the other units, then make connections correctly.

• Secure the wiring with cable clamps or adhesive tape. To

protect the wiring, wrap adhesive tape around them where

they lie against metal parts.

• Route and secure all wiring so it cannot touch any moving

parts, such as the gear shift, handbrake and seat rails.

• Do not route wiring in places that get hot, such as near the

heater outlet. If the insulation of the wiring melts or gets torn,

there is a danger of the wiring short-circuiting to the vehicle

body.

• When replacing the fuse, be sure to use only fuse of the

rating prescribed on the fuse holder.

• To minimize noise locate the TV antenna cable, radio antenna

cable and RCA cable as far away from each other as possible.

• Do not install the power supply box unit in places where it

may become subject to high temperatures or humidity, such

as:

- Places close to a heater, vent or air conditioner.

- Places exposed to direct sunlight, such as on top of the

dashboard or the rear shelf.

- Places that may be splashed by rain, for example close to

the door.

• Lay the cords by avoiding high-temperature areas. Use

corrugated tubes for wiring inside the engine room. If a cord

contacts a high-temperature area of the vehicle, the coating

may melt and cause short-circuiting, which may lead to a ﬁ re

or electric shock hazard.

Accessories

Camera (with camera bracket) ..........1

Camera connection cord ..........1

Power supply box..........1

Double-side adhesive tape (Large)..........1

Power cord ..........1

Switch unit..........1

Double-side adhesive tape (Small) ..........1

CMOS-300 only

The head unit connection cord is used for connection to

a Kenwood car navigation system equipped etc. with the

camera control function.

Waterproof packing ..........1

Camera bracket clamping screw..........1

Head unit connection cord ..........1

Product specificaties

Merk:	Kenwood
Categorie:	Achteruit rij camera
Model:	CMOS 200
Kleur van het product:	Zwart
Gewicht:	29 g
Stroomvoorziening:	14.4V, 0.1A
Minimale belichting:	100000, 0.9 Lux
Maximale beeldsnelheid:	- fps
Brandpuntbereik:	1.6 mm
Omvang optische sensor:	1/4 "
Type beeldsensor:	CMOS
Maximale videoresolutie:	- Pixels
Witbalans:	Auto
Focusbereik lens:	F2.3
Afmetingen (B x D x H):	24 x 24.8 x 24 mm
Video uit:	Ja