Kenmore 405.35182510 Handleiding

Kenmore Ventilatoren 405.35182510

Lees hieronder de 📖 handleiding in het Nederlandse voor Kenmore 405.35182510 (16 pagina's) in de categorie Ventilatoren. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
Use Care uide & G
Manual de o y Cuidado Us
English/Español
18" Stand Fan with
Remote Control
3 Speeds, Oscillating Action, Adjustable Tilt
Ventilador de Pedestal con
Control Remoto 18"
3 Velocidades, Acción Oscilante, Inclinación Ajustable
Model Modelo 405.35182510/ :
Customer Assistance /Asistencia al Cliente
1-866-646-4332
Sears Brands Management Corporation
Hoffma Estates, IL 60 9 U.S.A. n 17
www.kenmore.com
www.sears.com
www mart.com .k
®
Kenmore®
1
CAUTION
Read and follow all instructions before operating fan. Do not use fan if any part
are damaged or missing.
WA RNING
1. This appliance is not intended for use by young children or infirm persons
without supervision.
2. Young children should be supervised to ensure that they do not play with the
appliance.
3. This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electrical shock, this plug is intended to fit in a polarized
outlet only one way. If the plug does not fit fully into the outlet, reverse the
plug. If the plug still does not fit, contact a qualified electrician. Do not attempt
to bypass this safety feature.
4. If the supply cord is damaged ,it must be replaced by manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
5. To reduce the risk of fire or electrical shock, do no use this fan with any solid
state speed control device.
6. Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
RULES FOR SAFE OPERATION
1. Never insert fingers, pencils, or any other object through the housing when the
fan is running. Disconnect it when moving from one location to another.
2. Disconnect fan when moving from one location to another.
3. Disconnect fan when removing grilles for cleaning.
4. Do not leave the fan running unattended.
5. Be sure the fan is on a stable, flat surface when in operation.
6. The rules about cords and plugs are as follows:
(1) This product uses overload protection (fuse). A blown fuse indicates an
overload or short-circuit situation. If the fuse burns out, unplug the
product from the outlet. Replace the fuse as per the user servicing
instructions (follow product marking for proper fuse rating) and check
the products.If the replacement fuse blows, a short-circuit may be present
and the product should be discarded or call Customer Assistance at
1-866-646-4332 to arrange for possible repair.
(2) Do not operate any fan with a damaged cord or plug. Discard fan or call
Customer Assistance at 1-866-646-4332 to arrange for possible repair.
(3) D o not run cord under carpeting. Do not cover cord with throw rugs,
runners, or similar coverings. Do not route cord under furniture or
appliances. Arrange cord away from traffic area and where it will
not be tripped over.
READ AND SAVE THESE INSTRUCTIONS
2
PART FIGURE
13
11
12
14
1.Front guard
2.Spinner
3.Blade set
4.Plastic nut
5.Rear guard
6.Motor unit
7. Oscillation Control Button
8.Fan neck
9.Control panel
10. Height adjustment ring
11.Remote Control
1. Unscrew the Finger screw and washer from the bottom of the Extension pole.
Fig. 1
2. Insert the Extension pole into the Floor base. Insert the finger screw with washer
into the hole on the underside of the Floor base and into the Extension pole.
Securely tighten Finger screw. Fig. 2
3. Loosen the Height adjustment ring at the top of the extension pole. Raise the
internal metal pole to the desired height and securely tighten the Height
adjustment ring. Fig. 3
NOTE: If the internal pole is not visible it has slipped out of sight into the
extension pole. Loosen the Height adjustment ring to slide the internal pole out.
4. With a Phillips screwdriver loosen, but DO NOT REMOVE, the mounting screw in
the Fan neck base of the Motor unit. Insert the internal pole into the Fan neck
base as far as it will go. Tighten the screw to secure the motor unit in place. Fig. 4.
NOTE: If the screw is removed the retaining nut may slide out of its notch in the
motor unit base. If the nut slides out, insert it all the way into the notch, then insert
the screw into the mounting hole and tighten.
CAUTION: The Height adjustment ring must be tightly fastened before mounting
the motor unit to the internal pole.
ASSEMBLY OF BASE
Moun hoting le
Fig.4Fig.3Fig.2Fig.1
12 3 4 5 6 7
8
10
9
12.Remote Control Holder
13. Floor Base
14. Finger Screw

Product specificaties

Merk: Kenmore
Categorie: Ventilatoren
Model: 405.35182510

Heb je hulp nodig?

Als je hulp nodig hebt met Kenmore 405.35182510 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Ventilatoren Kenmore

Kenmore

Kenmore 258.32002310 Handleiding

3 Oktober 2022
Kenmore

Kenmore 405.35182510 Handleiding

3 Oktober 2022

Handleiding Ventilatoren

Nieuwste handleidingen voor Ventilatoren

BEKO

BEKO EFS7700W Handleiding

3 Oktober 2022
Domo

Domo DO8146 Handleiding

3 Oktober 2022
Nedis

Nedis FNFL20CBK30 Handleiding

3 Oktober 2022
Proklima

Proklima TFN-110145.2 Handleiding

3 Oktober 2022
Emerio

Emerio FN-114201.3 Handleiding

3 Oktober 2022
Svan

Svan SVVE01180R Handleiding

3 Oktober 2022
Orbegozo

Orbegozo SF 0147 Handleiding

3 Oktober 2022
Telefunken

Telefunken TKVPP1 Handleiding

3 Oktober 2022
Emerio

Emerio MIS-122958.2 Handleiding

3 Oktober 2022
Emerio

Emerio FN-114204.3 Handleiding

3 Oktober 2022