Kelvinator KGC26SNA Handleiding

Kelvinator Ketel & boiler KGC26SNA

Lees hieronder de 📖 handleiding in het Nederlandse voor Kelvinator KGC26SNA (16 pagina's) in de categorie Ketel & boiler. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
Gas Continuous Flow Hot Water System
User Manual
2 contents Kelvinator gas continuous flow hot water systems
Congratulations and thank you for choosing our gas
continuous flow hot water system. We are sure you will find
your new hot water system a pleasure to use. Before you use
your hot water system, we recommend that you read through
the entire user manual, which provides the description of the
hot water system and its functions.
To avoid the risks that are always present when you use
an appliance, it is important that the hot water system
is installed correctly and that you read the safety instructions
carefully to avoid misuse and hazards.
We recommend that you keep this instruction booklet
for future reference and pass it on to any future owners.
After unpacking the hot water system please check it is not
damaged. If in doubt, do not use the hot water system but
contact your local Electrolux Customer Care Centre.
NOTE: The actual gas heating appliance that is part of this
gas continuous flow hot water system will here after be
refered to as "water heater" for the purposes of this manual.
The gas continuous flow hot water system as a whole may
also be refered to as "hot water system" for simplicity.
environmental tips
Information on disposal for users
• Most of the packing materials are recyclable.
Please dispose of those materials through your local
recycling depot or by placing them in appropriate
collection containers.
• If you wish to discard this hot water system, please
contact your local authorities and ask for the correct
method of disposal.
• Contact an authorised installer for installation of this hot
water system.
• Contact an authorised service technician for repair or
maintenance of this hot water system.
• If the power cord is to be replaced, replacement work
must be performed by authorised personnel only.
• Installation work must be performed in accordance
with national standards by authorised personnel only.
Wrong connection can cause over heating or re.
• This hot water system should be installed in accordance
with AS/NZS 3000 and your electricity suppliers rules.
Conditions of use
This hot water system is intended to be used in household
and similar applications such as :
• staff kitchen areas in shops, ofces and other working
environments.
• farm houses.
• by clients in hotels, motels and other residential type
environments.
• bed and breakfast type environments.
Important ..........................................................................3
Important safety instructions ...........................................4
Specifications ....................................................................5
Your gas continuous flow hot water system 6 ....................
How it works 6 ..................................................................
Initial operation ...............................................................7
Normal operation ............................................................8
Freeze prevention .............................................................9
Winter shutdown .............................................................9
Maintenance and service ................................................ 10
Water heater draining and filter cleaning ..................... 10
General troubleshooting ................................................. 11
Warranty .......................................................................... 15
Congratulations Contents
This User Manual has been prepared for owners and users
of the hot water system. Please keep it in a safe place for
future reference.
Meanings of symbols used in this manual are shown below:
warning
This symbol indicates information concerning your
personal safety
caution
This symbol indicates information on how to avoid
damaging the hot water system
tips & information
This symbol indicates tips and information about
use of the hot water system
environmental tips
This symbol indicates tips and information about
economical and ecological use of the hot water system
For the installer
The installation must be completed in accordance with the
information supplied in the Installation Manual that comes
with your gas continuous flow hot water system.
All other relevant National, State or Local regulations must
also be conformed with and these include (but are not
limited to):
• Australian Standard AS3500.1 – Water Supply
• Australian Standard AS3500.4 – Hot Water Supply
• Australian Standard AS3000 – Electrical Installation
• Australian Gas Association Code AS5601 –
Gas Appliance Installation
• Local Water, Gas & Electrical Authority Regulations
Municipal Building Codes
warning
Installation must be performed by a qualied installer (for
example, a licensed plumber or gas tter).
Inside you will find many helpful hints on how to use and
maintain your hot water system properly.
Just a little preventative care on your part can save you a
great deal of time and money over the life of your hot water
system. You'll find many answers to common problems
in the chart of troubleshooting tips. If you review the chart
of Troubleshooting Tips first, you may not need to call
for service.
This symbol indicates never to do this
This symbol indicates always do this
warning
Connect with power properly.
Otherwise, it may cause electric shock or fire due to
excess heat generation.
Always ensure effective earthing.
No earthing may cause electric shock.
Disconnect the power and turn off the gas inlet valve
to the hot water system if strange sounds, smell, or
smoke comes from it.
It may cause fire and electric shock.
Do not operate or stop the water heater by switching
on or off the power.
It may cause electric shock or fire due to heat generation.
Do not damage or use an unspecied power cord.
It may cause electric shock or fire.
If the power cord is damaged, it must be replaced by
the manufacturer or an authorised service centre or a
similarly qualified person in order to avoid a hazard.
Do not modify power cord length or share the outlet
with other appliances.
It may cause electric shock or fire due to heat generation.
Do not operate with wet hands or in a damp
environment.
It may cause electric shock.
Do not allow water to run into electric parts.
It may cause failure of machine or electric shock.
Do not use the socket if it is loose or damaged.
It may cause fire and electric shock.
Do not open the water heater during operation.
It may cause electric shock.
Do not allow the power cord to rest close to hot
surfaces.
It may cause fire and electric shock.
Do not disassemble or modify water heater.
It may cause failure and electric shock.
Important
Kelvinator gas continuous flow hot water systems important notes 3

Product specificaties

Merk: Kelvinator
Categorie: Ketel & boiler
Model: KGC26SNA

Heb je hulp nodig?

Als je hulp nodig hebt met Kelvinator KGC26SNA stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Ketel & boiler Kelvinator

Kelvinator

Kelvinator KGC26SNA Handleiding

16 Februari 2024

Handleiding Ketel & boiler

Nieuwste handleidingen voor Ketel & boiler

Cointra

Cointra Optima 11 D Handleiding

8 April 2024
Cointra

Cointra Thermex IF Handleiding

8 April 2024
Cointra

Cointra TNC 10 Handleiding

8 April 2024
Cointra

Cointra Optima COB-10p Handleiding

8 April 2024
Cointra

Cointra Optima COB-5p Handleiding

8 April 2024
Cointra

Cointra Thermex ID Handleiding

8 April 2024
Cointra

Cointra TNC- 100 H Handleiding

8 April 2024
Cointra

Cointra TNC-15 Handleiding

8 April 2024
Cointra

Cointra Optima COB-5N Handleiding

8 April 2024
Cointra

Cointra TNC 100H Handleiding

8 April 2024