Kata R-103 Handleiding

Kata cameratas R-103

Lees hieronder de 📖 handleiding in het Nederlandse voor Kata R-103 (2 pagina's) in de categorie cameratas. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Secure the top of the tripod with the fastening

strap .

Slide the strap through one of the upper vertical

connecting loops and fasten firmly.

Adjust hanging height according to the length of

your tripod:

Open the top Slik-clip buckles on the back of the

pouch (these can be opened from either side)

and slide them through the loops on the side of

the backpack.

Note:

It is possible to adjust the height of the pouch by

utilizing the vertical connecting loops which are

on the backpack. This allows you to achieve

optimal weight distribution.

Side attachment configuration

Secure the Slik-clip buckle through one of the

loops on the opposite strap of the pouch.

Additional front attachment position for R-102/3 HB-205/7

Connect the 2 Slik-clip buckles to the top

parallel tabs on the frontR-102/3 HB-205/7

panel, and slide the fastening strap through.

This configuration offers symmetrical

weight distribution without compromising

the front quick opening for camera access.

Katas TST Tripod Holder is a modular and

versatile component. It can be connected to

most KATA backpacks:

BP-502

R-102/3

HB-205/7

The TST Tripod Holder includes the pouch

and an upper fastening strap.

TST TRIPOD HOLDER

Name:

Order code:

Attachment stages:

Insert two of the tripod legs in the TST tripod

holder (the third is meant to be left outside nestling

in the designated groove).

According to the size of the tripod in use

connect the 2 Slik-clip buckles of the pouch

to the appropriate lower parallel tabs.

It is possible to adjust the height of the TST

tripod holder for optimal weight distribution

by using any of the 3 sets of parallel tabs

set at various heights.

Secure the top part of the tripod with the

fastening strap .

Slide the strap through the two upper Slik-

clip buckles and fasten firmly.

Attachment stages:

Pouch

Fastening strap

Vertical connecting loops feature

on Kata backpacks

2 3 4

Slik-clip

connecting

buckle

1 1

BP-502

KT BP-502

R-102/3

KT R-102/3

HB-205/7

KT HB-205/7 Demo on BP-502

Demo on BP-502

Demo on R-102

Made of Taffeta Nylon with weather resistant

treatment. One side is Black and the other

side is reflective silver for hot days; the silver

side can also be used as a light reflector.

After use in rain you simply put it in the

provided mesh bag and hang it on the

outside of the bag.

Attach the Clip-On straps to your

Camera using the designated grooves.

Include:

2 Clip-On Camera straps the

1 Neck Extension strap.

Attach both Clip-On straps to the

harness using the designated D-Rings.

Specially designed Camera Straps can

be attached to the D-rings on the harness

to take the load off your neck.

These can easily be turned into a regular

camera strap by simply connecting to the

Neck Extension strap.

C A M E R A S T R A P

DS180506

Attachment stages:

Name:

Order code:

Neck

E x t e n s i o n s t r a p

Remove the standard Camera strap

from your camera.

When you wish to use the Camera

without the Backpack.

Connect both Clip-On straps to the

Neck Extension.

M e s h B a g

Kata s emer gency Elem ent Cove r is

de s i gned to p r ote ct your p a ck an d

e q u i p m e n t i n i n c l e m e n t w e a t h e r .

D O U B L E E L E M E N T C O V E R

Clip-On

Camera Strap

Development & production by Ltd.KATA

POB 45078 Jerusalem , Israel 91450

Tel: +972-2-5911000

Fax: + 972-2-5400504

www.kata-bags.com

Info: technical@kata-bags.com

Sales: videophoto@kata-bags.com

KATA. A SIMPLE CASE

OF BETTER DESIGN.

HB-205/7

KT HB-205/7

BP-502

KT BP-502

R-102/3

KT R-102/3

Product specificaties

Merk:	Kata
Categorie:	cameratas
Model:	R-103
Kleur van het product:	Zwart
Gewicht:	2100 g
Afmetingen binnenkant (B x D x H):	40 x 245 x 345 mm
Afmetingen (B x D x H):	200 x 360 x 530 mm