Kanto YU6 Handleiding

Kanto Speaker YU6

Lees hieronder de 📖 handleiding in het Nederlandse voor Kanto YU6 (12 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 57 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12

Supporting your digital lifestyle™

POWERED SPEAKERS

User Manual

YU6 Powered Speakers

English

Important Safety Precautions

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

ampliers) that produce heat.

• Protect the power-supply cord from being walked on or

pinched, particularly at plugs, convenience receptacles

and the point where they exit from the apparatus.

• Only use attachments / accessories specied by the

manufacturer.

• Use only with the cart, stand, tripod, bracket, or table

specied by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when

unused for long periods of time.

• Refer all servicing to qualied service personnel. Servicing

is required when the apparatus has been damaged in

any way, such as power-supply cord or plug is damaged,

liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or

moisture, the apparatus does not operate normally, or

the apparatus has been dropped.

• Apparatus shall be connected to a MAINS socket outlet

with a protective earthing connection.

• An appliance input coupler is used as the disconnect

device - the disconnect device shall remain readily

operable.

• Batteries or battery packs shall not be exposed to

excessive heat such as sunshine, re or the like.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

BACK PANEL.NO USER SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

DANGEROUS VOLTAGE

The lightning ash with arrowhead, within an

equilateral triangle, is intended to alert the user of

the presence of non-insulated “dangerous voltage”

within the product’s enclosure that may be of

sucient magnitude to constitute a risk of electric

shock to persons.

ATTENTION

The exclamation point within an equilateral

triangle is intended to alert the user of

the presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the apparatus.

FCC Notice:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part

15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna

- Increase the separation between the equipment and receiver

- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected

- Consult the dealer or an experienced radio/TV technician for help

NOTE 2: Any changes or modications to this unit not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

Industry Canada Notice:

This device complies with Industry Canada’s licence-exempt RSSs.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept

any interference, including interference that may cause undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or

lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the

antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that

necessary for successful communication.

This device complies with Canadian ICES-003 and RSS-210

Le pré sent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence

L’ exploitation est autorisé e aux deux conditions suivantes:

(1)l’ appareil ne droit pas produire de brouillage, et

(2)l’ utilisateur de l’ appareil doit accepter tout brouillage radioé lectrique subi, mê me si le brouillage est susceptible d’ en le

fonctionnement .

Supporting your digital lifestyle

™

Introduction

YU6 Active

Speaker

(Left Channel)

YU6 Passive

Speaker

(Right Channel)

AUXRCA OPT2OPT1

BALANCE

TREBLEBASS

YU6

Remote

Power

Cord

Self-Adhesive

Rubber Feet

3.5 mm cable

AUX

Speaker

Wire

User

Manuals

‘AAA’

Batteries

What’s In the Box?

Thank you for choosing YU6 outputs YU6 Powered Speakers, designed by Kanto in Canada.

200W Peak power into 6 Ohm speakers, for remarkably bold and clean sound. Excellent

sensitivity and frequency response provide deep thumping lows and clear, scintillating highs.

YU6 is an amazingly exible speaker system that can accept ve input sources and connect to

a subwoofer for enhanced low frequency response. Additionally, it is equipped with the latest

Bluetooth technology and a USB port for charging your devices. YU6 has a universal input

power supply and can be used worldwide from 110V AC to 240V AC.

We recommend you read all instructions carefully before using the system and keep them for

future reference. Kanto cannot be liable for damage or injury caused by incorrect setup or

use of this product.

This powered speaker system was carefully tested and inspected during production,

and before packaging and shipping. After unpacking, please check for any damage. It

is rare that a unit is damaged during shipping, but if this happens contact your retailer

immediately. You can also contact Kanto directly using one of the methods below.

Email: support@kantoliving.com

Toll Free: US & Canada: 1-888-848-2643 | UK: +44 800086999

Product specificaties

Merk:	Kanto
Categorie:	Speaker
Model:	YU6
Kleur van het product:	Wit
Gewicht:	9100 g
Breedte:	175 mm
Diepte:	205 mm
Hoogte:	272 mm
Gewicht verpakking:	11000 g
Breedte verpakking:	305 mm
Diepte verpakking:	495 mm
Hoogte verpakking:	390 mm
Gebruikershandleiding:	Ja
Materiaal behuizing:	MDF
Bluetooth:	Ja
Type verpakking:	Doos
Afstandsbediening:	IR
USB-connectortype:	USB Type-A
Connectiviteitstechnologie:	Bedraad en draadloos
Type stroombron:	AC
Meegeleverde kabels:	AC, AUX
Land van herkomst:	China
Aantal USB 2.0-poorten:	1
Gemiddeld vermogen:	100 W
Stroomverbruik (in standby):	0.5 W
Ingang stroom:	Ja
Aanbevolen gebruik:	Thuis
Impedantie:	6 Ohm
Audio-uitgangskanalen:	- kanalen
Speaker plaatsing:	Tafelblad/Boekenplank
Woofer:	Ja
Frequentiebereik:	50 - 20000 Hz
AUX ingang:	Ja
Luidspreker soort:	2-weg
Totale harmonische vervorming (THD):	0.3 procent
Diameter woofer:	5.25 "
Diameter hogetonenluidspreker:	1 "
Piekvermogen:	200 W
Afstandsbediening inbegrepen:	Ja
Tweeter:	Ja
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Batterijen inbegrepen:	Ja
Crossover frequentie:	2000 Hz
Versterker klasse:	D