KanexPro EXT-USBCPD2X4K-100M Handleiding

Bekijk gratis de handleiding van KanexPro EXT-USBCPD2X4K-100M (9 pagina’s), behorend tot de categorie Audio/video-converter. Deze gids werd als nuttig beoordeeld door 2 mensen. Heb je een vraag over KanexPro EXT-USBCPD2X4K-100M of wil je andere gebruikers van dit product iets vragen? Stel een vraag

EXT-USBCPD2X4K-100M

PRODUCT MANUAL

5Gbps Dual-Host USB-C Extender over CAT6a (100m/328ft) with Dual 4K HDMI

Out

The KanexPro EXT-USBCPD2X4K-100M extends USB 3.2 signals at 5Gbps up to 100 meters over a single CAT6a cable. The

transmitter features two selectable USB-C host ports with auto/manual switching and up to 100W PD charging. The receiver provides

dual HDMI outputs at up to 4K@60Hz, balanced/unbalanced analog audio de-embedding, and downstream USB device ports for

webcams, PTZ cameras, keyboards, and touch panels. Bi-directional 24V PoC allows power at either end. RS-232 pass-through and

FSYNC GPIO enable third-party control and industrial camera synchronization.

Surge Protection Recommended — This product contains sensitive electrical components that may be damaged by electrical spikes,

surges, electric shock, or lightning strikes. Use of surge protection systems is highly recommended.

Caution — The network cable connection method for this product is direct connection (T568B to T568B). Do not cross-connect.

TABLE OF CONTENTS

1. Introduction1

2. Features1

3. Package Contents1

4. Specifications2

5. Operation Controls and Functions3

5.1 Transmitter Panel3

5.2 Receiver Panel5

6. Default Settings & API Communication6

7. API Commands7

8. Application Example9

9. Troubleshooting9

FEATURES

PACKAGE CONTENTS

1× USB 3.2 Extender (TX) • 1× USB 3.2 Extender (RX) • 1× 24V/7.5A Locking Power Supply • 2× 4pin-3.5mm Phoenix Connector • 1× 5pin-3.5mm

Phoenix Connector • 4× Mounting Ears • 8× Machine Screws (KM3*4) • 1× Product Manual

Extends USB 3.2 signals at 5Gbps up to 100m/328ft over a single CAT6a cable via HDBaseT

Dual USB-C host inputs on TX with auto/manual switching — supports two-laptop redundancy or presenter handoff

USB-C PD charging up to 100W (1×100W or 2×50W) — powers laptops directly from the transmitter

Dual HDMI 2.0b outputs on RX at up to 4K@60Hz — mirror or extend displays with HDCP 2.2 compliance

Balanced and unbalanced analog audio de-embedding on RX (LPCM 2CH, 32–192kHz) via 5-pin phoenix connector

Three downstream USB device ports on each unit (1× USB-C + 2× USB-A) for webcams, PTZ cameras, keyboards, and touch panels

RS-232 pass-through on both TX and RX for third-party control system integration

FSYNC GPIO pass-through for industrial camera synchronization (default level range 0–5V)

Bi-directional 24V PoC — power either TX or RX, the other unit is powered over the CAT6a link

Scan for product page

kanexpro.com/item/EXT-USBCPD2X4K-100M

888.975.1368 | [email protected] | kanexpro.com

1 / 9

Product specificaties