Jysk Evald Handleiding
Pagina's 52 Niet gecategoriseerd
Bekijk de handleiding van Jysk Evald gratis online of download de PDF. Deze handleiding is 3 keer bekeken. Vraag over dit model? Stel een vraag
1/52
EVALD4912940
JYSK.com
1234567
17 cm
17 cm
11.8 cm
2/52
GB - This product contains a light source in energy efficiency class G.
Safety Information:
WARNING: Read this important information carefully before using the appliance and keep it for future reference.
• Indoor and household use only.
• Do not use in wet surroundings.
• Keep away from heat sources.
• Place on stable, level, non-slip surface.
• Keep out of reach of children / not a toy.
• Disconnect from power before cleaning.
• Clean only with soft cloth (no solvents/abrasives).
• Remove batteries during long storage.
• Insert batteries with correct polarity.
• Remove leaking batteries immediately.
• Stop use if discomfort occurs.
• The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be
replaced.
Introduction
• It’s suggested to place this Wake-up light 40-50 cm from your head.
• When the alarm clock is powered on with adapter and battery – in the startup state:
- LCD displays initial time is 0:00, alarm time 12:00, alarm sound 1.
- Ambient light, LCD backlight will turn on automatically and turn off after 8 seconds.
• Battery is mainly for memory function. Please always put battery inside to store data(setting) in case of sudden power loss.
- But if only powered by battery, then only time, alarm clock (only sound, without wake-up light), LCD display (no backlight)
works. Ambient light does not work.
- When battery is low of power, there will be a warning symbol to remind to change battery.
• Every 24 hours, time deviation will be within 3 seconds. There is no automatic time synchronization function. It’s suggested to
correct time every 1–2 months.
Buttons and settings
1234567
1. Button – Alarm sound + wake-up light
• Long press button to enter the alarm sound selection mode.
• Short press the ”+” or ”-” buttons to select alarm sounds (1 to 4 four different sounds).
1. Beep
2. Bird singing
3. Ocean Waves
4. Piano music
• Choose your favorite alarm sound and short press button to confirm the alarm sound.
• Then you will enter the wake-up light activation time setting. Short press the ”+” or ”-” buttons to select the activation time for
the wake-up light (30 minutes pre-/60 minutes pre-/90 minutes pre-alarm).
Please review these functions listed below:
• The alarm sound will gradually increase to 100% volume in 90 seconds.
• A single alarm cycle lasts up to 5 minutes.
3/52
• Wake up light is sunrise simulated light, from red to white light.
• If the alarm is set for a time shorter than the wake-up light duration, for example, if you set the wake-up light to turn on 30
minutes in advance, but the alarm is only 20 minutes away from the time you set it, then the wake-up light mode will not
activate. In that case, light will turn on at 100% brightness together with the alarm rings at the alarm setting time.
• Once wake up lighting is starting (but before the alarm rings), any button remains ineffective except button. If press
this button, wake up lights will be turned off (other buttons will be effective) and then turn on at 100% brightness
together with the alarm rings.
2. Button – Clock
• Long press button to enter time setting mode.
• LCD display will start blinking ” 12hr” or ”24hr”. Short press the ”+” or ”-” buttons to select 12h or 24h mode, short press
button to confirm time shows in 12h or 24h mode.
• Then hour digits will begin blinking, shortly press the ”+” or ”-” buttons to adjust the time.
• Then minute digits will begin blinking, short press the ”+” or ”-” buttons to adjust the minutes.
3. Button - Alarm
• Long press button to enter alarm setting mode.
• Hour digits will begin blinking. Shortly press the ”+” or ”-” buttons to adjust hour.
• Then minute digits will begin blinking, short press the ”+” or ”-” buttons to adjust minutes.
• Short press button to turn on or turn off alarm.
4. Button – Snooze and ambient light
• Short pressbutton to turn on warm white ambient light.
• When the light is on, short press the ”+” or ”-” buttons to adjust the brightness of the ambient light (100%-60%-30%).
• Snooze Mode: When the alarm rings, press button to enter snooze mode. Alarm and wake-up light (white light) will stop
– alarm sound and light (100% brightness) activate again after 9 minutes. In these 9 minutes, if press alarm button, then alarm
will be turned off.
• If any other button (except snooze button) is pressed while the alarm is ringing, the alarm will stop and the wake-up light will be
turned off - activating again at the setting time after 24 hours.
• If no button is pressed after the alarm rings, alarm will stop and wake-up light will be turned off after 5 minutes. Both alarm and
wake-up light will activate again at the setting time after 24 hours.
• After the snooze mode has been triggered three times, pressing the button a fourth time will not trigger snooze mode
again. Instead, alarm will stop, and wake-up light will be turned off. Both will activate again at the setting time after 24 hours.
5. ”+” Button – Increase value or light intensity
6. ”-” Button – Decrease value or light intensity
7. Button – LCD display backlight intensity
• Short pressbutton to turn on LCD backlight at the 100% of brightness.
• Short press thebutton again to adjust brightness of LCD backlight (100% - 50% - 10% - OFF).
Warning: Uses 2 AA (1.5V) batteries. Batteries not included. Do not recharge non-rechargeable batteries. Do not mix old and
new batteries or battery types. Only use batteries that are the same or similar to instruction manual’s battery requirements.
Insert batteries with poles facing correctly. Remove exhausted batteries from the product. Do not short-circuit supply terminals.
Do not throw batteries on open fire.
The crossed-out wheeled bin indicates that marked items must be disposed of separately from household waste. By handing
over marked items for recycling, according to local regulations, you help reduce potential harmful impact on the environment and
on human health. For more information, please contact your JYSK store.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
DK - Denne vare indeholder en lyskilde i energieffektivitetsklasse G.
Sikkerhedsinformation:
ADVARSEL: Læs denne vigtige information omhyggeligt, før du tager apparatet i brug, og gem den til fremtidig reference.
• Kun til indendørs og privat brug.
• Må ikke anvendes i våde omgivelser.
• Holdes væk fra varmekilder.
Product specificaties
| Merk: | Jysk |
| Categorie: | Niet gecategoriseerd |
| Model: | Evald |
Heb je hulp nodig?
Als je hulp nodig hebt met Jysk Evald stel dan hieronder een vraag en andere gebruikers zullen je antwoorden