JVC KY-PZ100BE Handleiding

JVC Bewakingscamera KY-PZ100BE

Lees hieronder de 📖 handleiding in het Nederlandse voor JVC KY-PZ100BE (125 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/125

JVC Camcorder Web API Reference

Version 1.17

JVC KENWOOD Corporation

Page 1

Conditions for the use of this document

Use of this document is permitted only if you agree to the following terms.

JVCKENWOOD CORPORATION SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT LIMITED TO,

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. JVCKENWOOD

CORPORATION HAS NO OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR

MODIFICATIONS.

THIS DOCUMENT DESCRIBES APPLICATION PROGRAMMING INTERFACE TO CONTROL JVC CAMERA RECORDERS

VIA NETWORK, AND IT SHALL NOT BE USED FOR ANY OTHER PURPOSE.

Page 2

History

Version

Outline

1.00 First release

1.01 Added GY-HM660 to the command table

Added "3.1.15 Set streaming server settings(RTP)" command only GY-HM660.

Added PcrJitter parameter in "3.1.18 Get streaming server settings" and "3.1.19 Set streaming server settings(UDP)" commands

1.02

Added "3.1.14 Set streaming server settings(RTP)" command for all cameras.

Type "TCP" is effective in "GY-HM650" and "GY-HM660" in command with a streaming type parameter.

Added "Variable Gain" parameter to "3.3.1 Get Camera Status" and "3.3.6 Set Web Event" for "GY-LS300".

1.03

Type "TCP" is effective in "GY-HM650" in command with a streaming type parameter.

Type "UDPN" and "UDPL" are effective in "GY-HM660" in command with a streaming type parameter.

1.04 Supported KY-PZ100 newly.

Added "3.1.3 Set streaming framerate" command for "KY-PZ100".

Added "3.1.6 Available streaming framerate settings" command for "KY-PZ100".

Added "3.4. PTZ Camera Support Command" for "KY-PZ100".

Added "3.5. How to acquire JPEG data" for "KY-PZ100".

1.05 Added "3.1.3 Set streaming framerate" command for "GY-HM200", "GY-LS300", "GY-HM8x0", and "GY-HM660".

Added "3.1.6 Available streaming framerate settings" command for "GY-HM200", "GY-LS300", "GY-HM8x0", and "GY-HM660".

Added "3.5. How to acquire JPEG data" for "GY-HM200", "GY-LS300", "GY-HM8x0", and "GY-HM660".

Added "3.6. How to use interruptible feedback function" for "GY-HM660".

1.06 Error correction. 2.1.1.

Another client is able to connect while first client is using API interface.

3.2.2 SessionRenewal command has become obsolete.

Added "3.6. How to use interruptible feedback function" for "GY-HM8x0".

Type "UDPN" and "UDPL" are effective in "GY-HM8x0" in command with a streaming type parameter

of "3.1.7 Available streaming bitrate settings" command.

1.07 Error correction. "3.1.10 Get streaming server settings".

Revised wrong parameters. They are effective to all models.

Error correction. "3.3.6. Set Web Button Event".

Some parameters are not supported on "KY-PZ100".

Added "MasterBlack" parameters to "3.3.1 Get Camera Status" and "3.3.6 Set Web Event"

for "GY-HM8x0", "GY-HM660", and "GY-HM200".

Added "Detail" parameters to "3.3.1 Get Camera Status" and "3.3.6 Set Web Event" for "GY-HM8x0", "GY-HM660", and "GY-HM200".

Added "3.4.3 Zoom switch operation" command for "GY-HM8x0", "GY-HM660", and "GY-HM200".

Added "3.3.10 Seesaw switch operation" command for "GY-HM8x0", "GY-HM660", and "GY-HM200".

Added Gain event "Up1"/"Down1" parameters to "3.3.6 Set Web Event" for "GY-HM8x0", "GY-HM660", and "GY-HM200".

Added target models "GY-HM8x0", "GY-HM660", and "GY-HM200" to MenuStatus of "3.3.1 Get Camera Status"

Added "3.7. How to control tally system" description for "GY-HM8x0", "GY-HM660", "GY-HM200", and "KY-PZ100".

Changed ""3.3.5. Tally lamp control" description correspond to it.

1.08 Added "Serial" parameter to "3.2.1. Get System Information" for "GY-HM660","GY-HM8x0","GY-HM200", and "KY-PZ100".

Added "3.2.6 Get NTP Status","3.2.7 Set NTP Server", and "3,2,8 Set NTP settings" Commands

for "GY-HM660","GY-HM8x0","GY-HM200", and "KY-PZ100".

Supported GY-HM25x newly.

Error correction.

Added "Whb" "Status" parameter to "3.3.1. Get camera status".

Changed "3.3.1. Get camera status". Parameter ("Enable" "Streaming" "On/Off") is not effective in "GY-HM200" and "GY-HM25x".

1.09 Added "Serial" parameter to "3.2.1. Get System Information" for "GY-HM650".

Added "3.5. How to acquire JPEG data" for "GY-HM650".

Supported GY-HC900 newly.

1.10 for "GY-HC900" updates as below.

Added some resolution and bitrate parameters to "3.1. Streaming Setting Command".

Added "Smpte2022Fec" to "3.1.10. Get streaming server settings" and "3.1.16. Set streaming server settings(RTP)".

Added "AdaptiveBitrate" to "3.1.10. Get streaming server settings" and "3.1.14. Set streaming server settings(ZIXI)" .

Added "3.8. Return over IP Command" for "GY-HC900".

Added "Resolution" and "FrameRate" to "3.8.3. GetReturnOverIpServerSettings" and "3.8.4. SetReturnOverIpServerSettings(RTSP/Zixi)".

Added "3.8.3.1. AvailableTypeOfReturnOverIP" and "3.8.3.2. AvailableFrameRateOfReturnOverIP" commands.

Added "IrisBar" parameter to "3.3.7. Set Web Slider Event".

Added "Position(Iris)" parameter "3.3.1. Get camera status".

Added "PCR Mode" to "3.1.10. Get streaming server settings" and "3.1.16. Set streaming server settings(UDP/Zixi/RTP)" .

Added "Overlay" and "Tagging" parameter to 3.2.1. Get System Information.

Error correction. GY-HC900 does not support "Iris PushAuto" of "3.3.6 Set Web Event".

1.11 Supported GY-HC5x0 newly.

Added "3.2.6. Get NTP Status" and "3.2.7. Set NTP Server" for "GY-HC5x0".

Added SRT parameter for "GY-HC5x0".

"3.2.1. Get System Information", "3.1.7. Available streaming bitrate settings",

"3.1.10. Get streaming server settings", and "3.1.18. Set streaming server settings(SRT)".

Added "PCR Mode" parameter to "3.1.10. Get streaming server settings"

and "3.1.16.Set streaming server settings(UDP/Zixi/RTP)" for GY-HC5x0.

Added "RTMPS" protocol for "GY-HC5x0".

"3.1.7. Available streaming bitrate settings" and "3.1.10. Get streaming server settings"

and "3.1.16. Set streaming server settings(RTMPS)".

1.12 Added "3.2.6. Get NTP Status" and "3.2.7. Set NTP Server" for "GY-HC900".

Added SRT parameter for "GY-HC900".

"3.2.1. Get System Information", "3.1.7. Available streaming bitrate settings",

"3.1.10. Get streaming server settings", and "3.1.18. Set streaming server settings(SRT)".

Added "3.8. Return over IP Command" 30p/25p parameter for "GY-HC5x0".

Added "IrisBar" parameter to "3.3.7. Set Web Slider Event" for "GY-HC5x0".

Added "Position(Iris)" parameter "3.3.1. Get camera status" for "GY-HC5x0".

Added "KA_EN200" parameter to 3.2.1. Get System Information for "GY-HC5x0" and "GY-HC900".

Added "422 60p" and "422 50p" parameters to each available streaming settings

for "GY-HC5x0" and "GY-HC900" when "KA-EN200" is enabled.

"3.1.1. Get streaming settings" and other available settings.

Added "EXT slot information" to "3.3.1. Get camera status" for "GY-HC900".

Page 3

Product specificaties

Merk:	JVC
Categorie:	Bewakingscamera
Model:	KY-PZ100BE
Kleur van het product:	Zwart
Gewicht:	2000 g
Breedte:	154 mm
Diepte:	191 mm
Hoogte:	200.7 mm
Soort:	IP-beveiligingscamera
LED-indicatoren:	Ja
Vormfactor:	Torentje
Automatisch scherpstellen:	Ja
USB-poort:	Ja
Ondersteuning voor plaatsing:	Binnen
Connectiviteitstechnologie:	Bedraad en draadloos
Ethernet LAN:	Ja
Montagewijze:	Bureau
Maximum resolutie:	1920 x 1080 Pixels
Totaal aantal megapixels:	13 MP
Type stroombron:	DC, PoE
Aantal cameras:	1
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	MicroSDHC, MicroSDXC
Nachtvisie:	Ja
Zoomcapaciteit:	Ja
Aantal HDMI-poorten:	1
Aantal Ethernet LAN (RJ-45)-poorten:	1
Brandpuntbereik:	4.3 - 129 mm
Omvang optische sensor:	1/2.8 "
Aansluiting voor netstroomadapter:	Ja
Type beeldsensor:	CMOS
Digitale zoom:	12 x
Optische zoom:	30 x
Effectieve sensorresolutie:	13 Pixels
Temperatuur bij opslag:	-20 - 50 °C
Luchtvochtigheid bij opslag:	30 - 85 procent
Signaal/ruis-verhouding:	48 dB
PTZ control:	Ja
Pan bereik:	-175 - 175 °
Aantal lenzen:	1
Maximum aperture number:	4.7
Minimum aperture number:	1.6
Controle camerapanning:	Ja
Kantelfunctie camera:	Ja
Draai-snelheid:	300 °/sec
Pan snelheid:	480 °/sec
Aantal sensoren:	1
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	30 - 80 procent
Bereik kantelhoek:	-30 - 90 °