JVC GR-DVM1 Handleiding

JVC Camcorder GR-DVM1

Lees hieronder de 📖 handleiding in het Nederlandse voor JVC GR-DVM1 (33 pagina's) in de categorie Camcorder. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/33
For Customer Use:
Enter below the Serial Nos. of the
GR-DVM1U camcorder and the
AA-V80U AC Power Adapter/Charger.
The serial numbers are located on the
bottom of the GR-DVM1U and the
AA-V80U.
Model No. GR-DVM1U/AA-V80U
Serial No.
GR-DVM1
DIGITAL VIDEO CAMERA
LYT0002-038B
INSTRUCTIONS
MODE D’EMPLOI
MANUAL DE INSTRUCCIONES
CAMERA VIDEO NUMERIQUE
CAMARA DE VIDEO DIGITAL
ENGLISHFRANÇAISESPAÑOL
2
WARNING:
TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR
MOISTURE.
Warning on lithium cell battery
The battery used in this device may present a fire or
chemical burn hazard if mistreated. Do not recharge,
disassemble, heat above 100°C (212°F) or incinerate.
Replace battery with Panasonic (Matsushita Elec-
tronic), Sanyo or Maxell CR2025; use of another
battery may present a risk of fire or explosion.
n Dispose of used battery properly.
n Keep away from children.
n Do not disassemble and do not dispose of in fire.
CAUTION (applies to the Docking Station):
TO REDUCE THE RISK OF FIRE,
DO NOT REMOVE COVER (OR
BACK). NO USER–SERVICEABLE
PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
NOTES:
●
The rating plate (serial number plate) and safety
caution are on the bottom and/or the back of the
main unit.
●
The rating plate (serial number plate) of the AC
Power Adapter/Charger is on its bottom.
●
The rating plate (serial number plate) of the Docking
Station is on its bottom.
This Class B digital apparatus meets all requirements of
the Canadian Interference – Causing Equipment
Regulations.
“Cet appareil numérique de la classe B respecte toutes
les exigences du Règlement sur le matériel brouilleur
du Canada.”
This camcorder is designed to be used with NTSC-type
color television signals. It cannot be used for playback
with a television of a different standard. However, live
recording and viewfinder playback are possible
anywhere. Use the BN-V812U battery pack and, to
recharge it, the provided multi-voltage AC Power
Adapter/Charger AA-V80U. (An appropriate conver-
sion adapter may be necessary to accommodate
different designs of AC outlets in different countries.)
Dear Customer,
Thank you for purchasing this Digital Video Camera.
Before use, please read the safety information and
precautions contained in the following pages to ensure
safe use of this product.
Using This Instruction Manual
• All major sections and subsections are listed in the Table
Of Contents (Z pg. 7).
• Notes appear after most subsections. Be sure to read
these as well.
• Basic and advanced features/operation are separated for
easier reference.
It is recommended that you . . .
...... refer to “Controls, Indications and Connectors”
(Z pgs. 73 – 76) and familiarize yourself with button
locations, etc. before use.
...... read thoroughly the Safety Precautions and Safety
Instructions that follow. They contain extremely
important information regarding the safe use of your
new camcorder.
You are recommended to carefully read the cautions
on pages 78 and 79 before use.
SAFETY
PRECAUTIONS
The AA-V80U AC Power Adapter/Charger should be
used with:
AC 120 V , 60 Hz in the USA and Canada,`
AC 110 – 240 V , 50/60 Hz in other countries.`
CAUTION (applies to the AA-V80U)
TO PREVENT ELECTRIC SHOCK MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION (s'applique à l'AA-V80U)
POUR ÉVITER LES CHOCS ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRISE
ET POUSSER JUSQU'AU FOND.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
3
5. Ventilation
Slots and openings in the cabinet are provided for
ventilation. To ensure reliable operation of the product and
to protect it from overheating, these openings must not be
blocked or covered.
• Do not block the openings by placing the product on a
bed, sofa, rug or other similar surface.
• Do not place the product in a built-in installation such as
a bookcase or rack unless proper ventilation is provided
or the manufacturer’s instructions have been adhered to.
6. Wall or Ceiling Mounting
The product should be mounted to a wall or ceiling only as
recommended by the manufacturer.
ANTENNA INSTALLATION
INSTRUCTIONS
1. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the
product, be sure the antenna or cable system is grounded
so as to provide some protection against voltage surges and
built-up static charges. Article 810 of the National Electrical
Code, ANSI/NFPA 70, provides information with regard to
proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
2. Lightning
For added protection for this product during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line
surges.
3. Power Lines
An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
IMPORTANT PRODUCT
SAFETY INSTRUCTIONS
Electrical energy can perform many useful functions. But
improper use can result in potential electrical shock or fire
hazards. This product has been engineered and
manufactured to assure your personal safety. In order not to
defeat the built-in safeguards, observe the following basic
rules for its installation, use and servicing.
ATTENTION:
Follow and obey all warnings and instructions marked on
your product and its operating instructions. For your safety,
please read all the safety and operating instructions before
you operate this product and keep this manual for future
reference.
INSTALLATION
1. Grounding or Polarization
(A) Your product may be equipped with a polarized
alternating-current line plug (a plug having one blade
wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature.
If you are unable to insert the plug fully into the outlet,
try reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the
polarized plug.
(B) Your product may be equipped with a 3-wire
grounding-type plug, a plug having a third (grounding)
pin. This plug will only fit into a grounding-type power
outlet. This is a safety feature.
If you are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the
grounding-type plug.
2. Power Sources
Operate your product only from the type of power source
indicated on the marking label. If you are not sure of the
type of power supply to your home, consult your product
dealer or local power company. If your product is intended
to operate from battery power, or other sources, refer to the
operating instructions.
3. Overloading
Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or
electric shock.
4. Power Cord Protection
Power supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit
from the product.
ANTENNA
LEAD IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION
810-20)
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM
(NEC ART 250. PART H)
NEC – NATIONAL ELECTRICAL CODE
ELECTRIC SERVICE
EQUIPMENT
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
GROUND CLAMP

Product specificaties

Merk: JVC
Categorie: Camcorder
Model: GR-DVM1

Heb je hulp nodig?

Als je hulp nodig hebt met JVC GR-DVM1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Camcorder JVC

JVC

JVC Everio GZ-MG630 Handleiding

2 Juli 2023
JVC

JVC GR-AXM18 Handleiding

19 Juni 2023
JVC

JVC Everio GZ-R440 Handleiding

7 Juni 2023
JVC

JVC GR-D370 Handleiding

6 Juni 2023
JVC

JVC GZ-HM670BUS Handleiding

23 Mei 2023
JVC

JVC Everio GZ-E505BE Handleiding

22 Mei 2023
JVC

JVC Everio R GZ-R445DE Handleiding

21 Mei 2023
JVC

JVC Everio GZ-E205WE Handleiding

20 Mei 2023
JVC

JVC GR-SXM37 Handleiding

20 Mei 2023
JVC

JVC GZ-MG20E Handleiding

16 Mei 2023

Handleiding Camcorder

Nieuwste handleidingen voor Camcorder

CamOne

CamOne Infinity COIN01 Handleiding

18 April 2024
Panasonic

Panasonic NV-DS29 Handleiding

8 April 2024
Samsung

Samsung VP-DC171 Handleiding

8 April 2024
Rollei

Rollei Racy Handleiding

25 Maart 2024
Rollei

Rollei Wireless Camcorder Handleiding

25 Maart 2024
Rollei

Rollei Action One Handleiding

25 Maart 2024
Rollei

Rollei Actioncam 5s Handleiding

25 Maart 2024
Denver

Denver ACK-8064 Handleiding

22 Maart 2024
Goclever

Goclever Extreme PRO 4k Handleiding

21 Maart 2024
Bolex

Bolex H16 SB Handleiding

19 Maart 2024