Juno IC22 Handleiding

Bekijk gratis de handleiding van Juno IC22 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen. Heb je een vraag over Juno IC22 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

REV-2/09

DIMENSIONS

6” ECONOMY UNIVERSAL

IC HOUSING

INCANDESCENT LAMPS

IC22

G1.2.0

Project:

Fixture Type:

Location:

Contact/Phone:

7 1/8"

13 1/2"

Will expand

to 25"

(Reduces to 8 1/2"

with breakaway

feature)

7 1/2"

9 1/2"

13 1/8"

PRODUCT CODES

Catalog Number Input Voltage Lamp Rating (max.)

IC22120V

A19/BR30/BR40/PAR16/PAR20/PAR30/PAR30L/PAR38/R20 (See reverse for max. trim rating)

PRODUCT DESCRIPTION

IC Air-Loc

®

Housing • Energy efficient, sealed housing • Can

be completely covered with insulation • When used with Air-Loc

Gasket (see accessories), stops infiltration and exfiltration of air,

reducing heating and cooling costs • Trims shown with Air-Loc

symbol do not require a gasket.

PRODUCT SPECIFICATIONS

Lamp Lamp ratings based on trim selected–see reverse.

Socket Medium base porcelain with nickel-plated copper screw

shell • Adjustable socket plate and detachable socket with snap-in

springs to accommodate various lamp and trim combinations

• Socket plate secured at two points for consistent, straight lamp

positioning.

Trims Trim selection shown on reverse.

Labels U.L. listed for through-branch wiring, damp locations and

IP • Product thermally protected against improper use of lamps

• UL Listed/CSA certified • Trims 239, 241 and 242 are wet

location approved for covered ceiling applications • Trims 28, 29

are wet location approved for covered ceiling applications, when

used with outdoor rated lamps.

Testing All reports are based on published industry procedures;

field performance may differ from laboratory performance.

Product specifications subject to change without notice.

INSTALLATION

Real Nail 3 Bar HangersTelescoping, patent-pending Real Nail

3

system permits quick placement of housing anywhere within 24”

O.C. joists or suspended ceilings • Integral T-bar notch and clip

secures housing in suspended ceiling grid – no accessory clips

required • 24” expansion stop allows quick placement of fixture

in standard grid spacing • Bars scored in two locations for fast,

clean breaking, allowing housing installation in tight applications

• Bars captive to mounting frame • Edge-mounted for extra

strength • Captive bugle-headed ring shank nail for quick one-

step installation and easy removal with claw hammer for fixture

relocation • Quick-Loc slot (location identified on the mounting

frame) and oversized locking set screw lock fixture in position

• Bar hanger foot contoured to align to bottom of construction joist

• Alternate mounting holes included.

Junction BoxPre-wired junction box provided with (5)

1

⁄2” and

(1)

3

⁄4” knockouts, (4) Non-metallic sheathed cable connectors and

ground wire, U.L. listed/CSA certified for through-branch wiring,

maximum 8 No. 12 AWG 90˚ C branch circuit conductors (4 in,

4 out) • Junction box provided with removable access plates

• Knockouts equipped with pryout slots.

Mounting Frame22-gauge die-formed galvanized steel

mounting frame • Rough-in section (junction box, mounting frame,

housing and bar hangers) fully assembled for ease of installation

• Sight lines embossed on mounting frame to allow for easy

viewing when aligning fixtures.

HousingIC housing, .032” aluminum sealed for Air-Loc

Compliance • Housing is vertically adjustable to accommodate up

to a 1” ceiling thickness.

ACCESSORIES

Catalog No. Description

ALG6Air-Loc Gasket

To order, specify catalog number.

6 7/8” CEILING CUTOUT

Product specificaties