Jung 521ZNAUF Handleiding

Jung Stopcontact 521ZNAUF

Bekijk gratis de handleiding van Jung 521ZNAUF (4 pagina’s), behorend tot de categorie Stopcontact. Deze gids werd als nuttig beoordeeld door 10 mensen en kreeg gemiddeld 4.5 sterren uit 5.5 reviews. Heb je een vraag over Jung 521ZNAUF of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/4

SCHUKO socket with surge voltage protection

SCHUKO socket with surge voltage protectionSCHUKO socket with surge voltage protection

Art. no.: A521UF..

SCHUKO socket with surge voltage protection

SCHUKO socket with surge voltage protectionSCHUKO socket with surge voltage protection

Art. no.: 521ZNAUF

SCHUKO socket with surge voltage protection

SCHUKO socket with surge voltage protectionSCHUKO socket with surge voltage protection

Art. no.: ..521NAUF..

Operating instructions

Operating instructionsOperating instructions

11 Safety instructions

Safety instructions

Safety instructionsSafety instructions

Installation only by persons with appropriate electrotechnical knowledge and experience

Installation only by persons with appropriate electrotechnical knowledge and experienceInstallation only by persons with appropriate electrotechnical knowledge and experience

in the following areas:

in the following areas:in the following areas:

– The "5 safety rules" to be observed are: disconnect; secure against reconnection; determ-

ine that no voltage is present; ground and short-circuit; cover or block off adjacent live

parts

– Selection of suitable tools, measuring devices and, if necessary, personal protective

equipment

– Evaluation of the measurement results

– Selection of the electrical installation material to ensure the shutdown conditions

– IP degrees of protection

– Installation of the electrical installation material

– Type of mains supply (TN system, IT system, TT system) and the resulting connection re-

quirements (classic earthing, protective earthing, necessary additional measures, etc.)

Improper installation endangers your own life and the lives of users of the electrical system and

there is a risk of serious damage to property, e.g. through fire. You are at risk of personal liabil-

ity for personal injury and damage to property.

Contact an electrical contractor!

Contact an electrical contractor!Contact an electrical contractor!

Serious injuries, fire or property damage possible. Please read and follow manual fully.

Serious injuries, fire or property damage possible. Please read and follow manual fully.Serious injuries, fire or property damage possible. Please read and follow manual fully.

To protect against high-energy surges, install multistage selective protection. Otherwise con-

To protect against high-energy surges, install multistage selective protection. Otherwise con-To protect against high-energy surges, install multistage selective protection. Otherwise con-

nected devices may be damaged.

nected devices may be damaged.nected devices may be damaged.

These instructions are an integral part of the product, and must remain with the end customer.

These instructions are an integral part of the product, and must remain with the end customer.These instructions are an integral part of the product, and must remain with the end customer.

22 Device components

Device components

Device componentsDevice components

Figure1: Device components

(1) Socket outlet

(2) Red light emitting diode = protection function not in operation

(3) Red light emitting diode = mains voltage present

1 / 4

32515863 22.06.2021

J0082515863

SCHUKO socket with surge voltage protection

33 Intended use

Intended use

Intended useIntended use

– Type 3 fine protection for protecting electrical and electronic devices against transient

power surges according to EN 61643-11

– For use only in combination with Type 1 coarse protection and Type 2 medium protection

– For use in TN, TT and IT systems

– Stationary installation indoors in appliance box according to DIN 49073.

44 Instructions for operation

Instructions for operation

Instructions for operationInstructions for operation

– The device protects electrical and electronic devices against transient power surges.

– Failure of the protection function is indicated by an acoustic and visual signal.

– Keep cables between loads (5) and surge protection socket outlet (1) as short as possible,

max. 4 m.

– Do not lay protected cables parallel to unprotected cables. There is a danger of surge

voltage coupling.

– When performing insulation measurements on the system, all surge protection products

should always be disconnected, because otherwise the test voltage will be limited by the

protective modules, thus leading to incorrect measurements.

55 Information for electrically skilled persons

Information for electrically skilled persons

Information for electrically skilled personsInformation for electrically skilled persons

5.1

5.15.1 Fitting and electrical connection

Fitting and electrical connection

Fitting and electrical connectionFitting and electrical connection

DANGER!

Electrical shock when live parts are touched.

Electrical shock when live parts are touched.Electrical shock when live parts are touched.

Electrical shocks can be fatal.

Electrical shocks can be fatal.Electrical shocks can be fatal.

Before carrying out work on the device or load, disengage all the corresponding cir-

Before carrying out work on the device or load, disengage all the corresponding cir-Before carrying out work on the device or load, disengage all the corresponding cir-

cuit breakers. Cover up live parts in the working environment.

cuit breakers. Cover up live parts in the working environment.cuit breakers. Cover up live parts in the working environment.

Connecting and fitting the device

Connecting and fitting the deviceConnecting and fitting the device

Figure2: Connection diagram for single socket outlet

2 / 4

32515863 22.06.2021

J0082515863

SCHUKO socket with surge voltage protection

Figure3: Connection diagram for socket outlet combination

(1) Surge protection socket outlet

(4) Socket outlet with normal design

(5) Load

￭ Connect surge protection socket outlet according to connection diagram for single socket

outlet (Figure 2) or connection diagram for socket outlet combination (Figure 3).

The maximum continuous voltage (see Technical data) must not be exceeded. In multiple

combinations, when a surge protection socket outlet is used the other socket outlets used

in the combination are also protected in the normal design. For this the socket outlets

have to be installed on the same conductor.

￭ Install overvoltage protection socket outlet in appliance box.

￭ Mount the cover and frame. Observe correct installation position. Otherwise the LED will

not function.

66 Technical data

Technical data

Technical dataTechnical data

Overvoltage protection Type 3 arrester (one port)

Rated voltage AC AC 230 V ~ (± 10%)

Mains frequency 50 / 60 Hz

Maximum continuous voltage AC 255V~ (U

)

No-load voltage 4kV (U

)

Rated load current 16A (I

)

Short circuit strength 1.5kA (I

SCCR

)

Protection level

L/N ≤ 1.25kV (U

)

L/PE;N/PE ≤ 1.25kV (U

)

TOV characteristic 442V/5s/120min (U

)

Circuit breaker max. 16A (gG/C)

Ambient temperature -5 ... +40 °C

Relative humidity 5 ... 95 % (no moisture condensation)

Clampable conductor cross-section 1.5 ... 2.5mm²

3 / 4

32515863 22.06.2021

J0082515863

Product specificaties

Merk:	Jung
Categorie:	Stopcontact
Model:	521ZNAUF
Materiaal behuizing:	Kunststof
Aantal per verpakking:	1 stuk(s)
Bedrijfstemperatuur (T-T):	-5 - 40 °C
Stopcontact type:	Type F
Frequentieclassificatie:	50/60 Hz