Jung 2424 REG HE Handleiding
Pagina's 13 Niet gecategoriseerd
Bekijk de handleiding van Jung 2424 REG HE gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
Blind actuator RMD, Shutter actuator RMD
Blinds actuator, 4-gang DC 12-48 V
Art. No. 2424 REG HE
Blinds actuator, 2-gang AC 230 V, 1-gang DC 12-48 V
Art. No. 2502 REG HE
Blinds actuator, 4-gang AC 230 V, 2-gang DC 12-48 V
Art. No. 2504 REG HE
Blinds actuator, 8-gang AC 230 V, 4-gang DC 12-48 V
Art. No. 2508 REG HE
Art. No. 2514 REG HE
Shutter actuator 4-gang AC 230 V
Art. No. 2504 REGHER
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
For parallel connection of several motors to an output it is essential to observe the
corresponding instructions of the manufacturers, and to use a cut-off relay if necessary.
The motors may be destroyed.
Use only venetian blind motors with mechanical or electronic limit switches. Check the
limit switches for correct adjustment. Observe the specifications of the motor
manufacturers. Device can be damaged.
Danger of electric shock on the SELV/PELV installation. Do not connect loads for mains
voltage and SELV/PELV together on a single Venetian blind actuator.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1
(1) Button field for manual control
(2) Programming button and LEDs
(3) KNX connection
(4) Connection for mains supply
1/13
82560273
J:0082560273
19.04.2013
(5) Status LEDs for outputs
(6) Connection for Venetian blind motors
3 Function
System information
This device is a product of the KNX system and complies with the KNX directives. Detailed
technical knowledge obtained in KNX training courses is a prerequisite to proper
understanding.
The function of this device depends upon the software. Detailed information on loadable
software and attainable functionality as well as the software itself can be obtained from the
manufacturer´s product database.
Planning, installation and commissioning of the device are carried out with the aid of KNX-
certified software. Full functionality with KNX commissioning software version ETS3.0d
onwards.
An updated version of the product database, technical descriptions and conversion programs
and other auxiliary programs are available on our Internet website.
Intended use
- Switching of electrically driven Venetian blinds, rolling shutters, awnings and similar
hangings for AC 230 V mains voltage or DC 12...48 V extra-low voltage.
- Mounting on DIN rail according to EN 60715 in distribution boxes
Product characteristics
- Outputs can be operated manually, construction site mode
- Blind/shutter position directly controllable
- Acknowledgement of the blind/shutter position in bus and manual mode
- Safety functions: 3 independent wind alarms, rain alarm, frost alarm
- Integration into the temperature management of the building
- Disabling of individual outputs manually or via bus
i Delivery state: Outputs can be operated using button field, construction site mode.
Only shutter actuators:
- Suitable for 230 V AC motors and 12...48 V DC motors
- Automatic operation time detection for 230 V motors can be set
- Slat position directly controllable
- Acknowledgement of travelling state and slat position in bus and manual mode
- Light scene function
- "Top" and "Bottom" forced position via higher-level controller
- Sun protection function
Only Venetian blind actuator 2414 RMD HE:
- Blind/shutter correction for lower end position (e.g. for ventilation position for roller blinds)
- Status feedback for automatic operation
2/13
82560273
J:0082560273
19.04.2013
Blind actuator RMD, Shutter actuator RMD
4 Operation
Operating elements
Figure 2
(5) Status LEDs for outputs
(7) Button – Manual control c
(8) LED – on: continuous manual mode c
(9) Button : move hanging up/Stop n
(10) LED – on: hanging moves up, manual mode n
(11) Button : move hanging downwards/Stop o
(12) LED – on: hanging moves down, manual mode o
(13) Button : Stop all hangings ALL OFF
In operation with the button field the device distinguishes between a short and a long press.
- Short: pressing for less than 1 second
- Long: pressing for between 1 and 5 seconds
Status indication
The status LED (5) indicate the states of the outputs. A1...
- Off: Output switched off
- On: Output switched on
- Flashes slowly: Output in manual mode
- Flashes quickly: Output disabled via continuous manual mode
Operating modes
- Bus operation: Operation via push-button sensors or other bus devices
- Short-term manual operation: Manual operation locally with button field, automatic return to
bus operation.
- Continuous manual mode: Exclusively manual operation on the device
i No bus operation is possible in manual mode.
i No manual mode is possible in case of bus failure.
i After a bus failure and restoration the device switches to bus operation.
i After a power failure and restoration the device switches to bus operation.
i The manual mode can be disabled in ongoing operation via a bus telegram.
Priorities
- Highest priority: manual mode
- 2nd priority: forced position
- 3rd priority: safety function
- 4th priority: sun protection
- Lowest priority: bus mode: moving up/down, slat positioning, scenes, positioning
Switching on the temporary manual control
Operation using the button field is programmed and not disabled.
o Press the button briefly. c
3/13
82560273
J:0082560273
19.04.2013
Blind actuator RMD, Shutter actuator RMD
Product specificaties
| Merk: | Jung |
| Categorie: | Niet gecategoriseerd |
| Model: | 2424 REG HE |
Heb je hulp nodig?
Als je hulp nodig hebt met Jung 2424 REG HE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden