Juki IP-110F Handleiding
Juki
Naaimachine
IP-110F
Lees hieronder de 📖 handleiding in het Nederlandse voor Juki IP-110F (42 pagina's) in de categorie Naaimachine. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/42
ENGLISH
* "CompactFlash(TM)" is the registered trademark of SanDisk Corporation, U.S.A.
IP-110 TYPE F
INSTRUCTION MANUAL
No.00
40
i
CONTENTS
1. INSTALLING THE OPERATION PANEL .......................................................................1
2. CONNECTING THE CORD ...........................................................................................1
3. MACHINE HEAD SETTINGS ........................................................................................2
4. ADJUSTING THE MACHINE HEAD ANGLE
(DIRECT-DRIVE MOTOR TYPE SEWING MACHINE ONLY) .......................................3
5. EXPLANATION OF THE OPERATION PANEL.............................................................4
5-1. Names and functions of each components .................................................................................4
5-2. Adjusting the contrast of the operation panel screen ................................................................6
5-3. Connection of the production support switch ............................................................................6
5-4. Basic screen ...................................................................................................................................7
5-5. How to operate the operation panel for sewing stitching patterns ...........................................9
(1) Reverse stitching pattern ...................................................................................................................9
(2) Overlapped stitching pattern ...........................................................................................................11
(3) Programmed stitching pattern .........................................................................................................12
(4) Cycle sewing pattern ........................................................................................................................16
6. BOBBIN COUNTER ....................................................................................................18
7. NO. OF PCS. COUNTER .............................................................................................19
8. RE-SEWING SWITCH .................................................................................................19
9. NEEDLE UP/DOWN COMPENSATION SWITCH .......................................................20
10. ON/OFF SWITCH OF THE MATERIAL EDGE SENSOR ......................................20
11. AUTOMATIC THREAD TRIMMING SWITCH ........................................................20
12. ONE-SHOT AUTOMATIC STITCHING SWITCH ...................................................20
13. THREAD TRIMMING PROHIBITION SWITCH ......................................................21
14. SIMPLIFIED FUNCTION SETTING .............................................................................22
15. KEY-LOCK FUNCTION SETTING ..............................................................................23
16. FUNCTION SETTING ..................................................................................................24
17. OPTIONAL INPUT/OUTPUT SETTINGS ....................................................................29
18. AUTOMATIC COMPENSATION OF NEUTRAL POINT OF THE PEDAL SENSOR ....30
19. INITIALIZATION OF THE SETTING DATA .................................................................31
20. INFORMATION ............................................................................................................32
(1) Maintenance management function ................................................................................................32
(2) Working measurement function ......................................................................................................36
21. EXTERNAL INTERFACE ............................................................................................38
22. ERROR DISPLAY ........................................................................................................38
22-1. Error code list (Error display in panel).....................................................................................39
- 1 -
1) Remove side plate setscrews 1 from the side plate.
2) Install operation panelInstall operation panel 2 on the machine head using screws 5, plain washer 3, toothed washer 6 and
rubber seat 4 supplied with the panel.
1. INSTALLING THE OPERATION PANEL
< The relation between the respective machine heads and the positions of installing hole of the bracket are as described in the table. >
WARNING :
To prevent personal injury caused by abrupt start of the sewing machine, carry out the work after
turning OFF the power switch and ascertaining that the motor has completely stopped.
WARNING :
This Instruction Manual describes the operation panel IP-110F.
Be sure to use this operation panel after having read to fully understand the "Safety precautions" in
the Instruction Manual for the SC-920 (control box).
In addition, be careful not to splash water or oil on it, or shock such as dropping and the like since
this product is a precision instrument.
1. DDL-9000B (Not provided with AK) is given as an example of installing procedure.
2. Screw to install the panel changes according to the machine head used. Refer to Table 1 and con-
rm the kind of screw.
Table 1
Installing hole
Screw
DDL-9000A 1 - 5M5 X 12 Screw supplied with panel
as accessories
DDL-9000B 1 - 5M5 X 16 Screw supplied with panel
as accessories
DLN-9010 2 - 53/16-28 L=14 Screw supplied with panel
as accessories
LH-3500A 2 - 5M5 X 14 Side plate setscrew
1) Route cord 1 of the operation panel through
hole A in the table toward the underside of the
table.
2) Refer to the Instruction Manual for the SC-920
for how to connect the connector.
2. CONNECTING THE CORD
1
A
1
12 3 45 6
2
4
5
3
6
Product specificaties
| Merk: | Juki |
| Categorie: | Naaimachine |
| Model: | IP-110F |
Heb je hulp nodig?
Als je hulp nodig hebt met Juki IP-110F stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Naaimachine Juki
19 Maart 2024
5 Januari 2024
5 Januari 2024
5 Januari 2024
1 December 2023
22 Maart 2023
9 Juli 2023
8 Juli 2023
8 Juli 2023
8 Juli 2023
Handleiding Naaimachine
- Naaimachine IKEA
- Naaimachine AEG
- Naaimachine Medion
- Naaimachine Siemens
- Naaimachine Aigger
- Naaimachine Alfa
- Naaimachine Ambiano
- Naaimachine Anker-Bernette
- Naaimachine Baby Lock
- Naaimachine Bernina
- Naaimachine Bestron
- Naaimachine Blaupunkt
- Naaimachine Brother
- Naaimachine Durabase
- Naaimachine Durkopp Adler
- Naaimachine Easy Home
- Naaimachine Easymaxx
- Naaimachine Elna
- Naaimachine Emerio
- Naaimachine Empisal
- Naaimachine ER
- Naaimachine Feiyue
- Naaimachine Gritzner
- Naaimachine Hema
- Naaimachine Hofmann
- Naaimachine Home Electric
- Naaimachine Huskystar
- Naaimachine Husqvarna
- Naaimachine Husqvarna-Viking
- Naaimachine Kayser
- Naaimachine Kenmore
- Naaimachine Kohler
- Naaimachine Lervia
- Naaimachine Lewenstein
- Naaimachine Lifetec
- Naaimachine Livoo
- Naaimachine Mediashop
- Naaimachine Micromaxx
- Naaimachine Mio Star
- Naaimachine Muller
- Naaimachine Necchi
- Naaimachine Novamatic
- Naaimachine Pfaff
- Naaimachine Primera
- Naaimachine Privileg
- Naaimachine Siemssen
- Naaimachine Silver
- Naaimachine Silvercrest
- Naaimachine Singer
- Naaimachine Sinojo
- Naaimachine Solac
- Naaimachine Termozeta
- Naaimachine Tesco
- Naaimachine Toyota
- Naaimachine Vendomatic
- Naaimachine Veritas
- Naaimachine Victoria
- Naaimachine W6
- Naaimachine Weasy
- Naaimachine Yamata
- Naaimachine Zippy
- Naaimachine Janome
- Naaimachine Jata
- Naaimachine Jocca
- Naaimachine Crofton
- Naaimachine Guzzanti
- Naaimachine Mellerware
- Naaimachine Sinbo
- Naaimachine Carina
- Naaimachine Kunft
- Naaimachine Prince
- Naaimachine RCE
- Naaimachine Yamato
- Naaimachine Prixton
- Naaimachine Bernette
- Naaimachine Union Special
- Naaimachine Meister Craft
- Naaimachine Łucznik
- Naaimachine LERAN
- Naaimachine SteamMax
Nieuwste handleidingen voor Naaimachine
25 April 2024
25 April 2024
25 April 2024
25 April 2024
25 April 2024
25 April 2024
25 April 2024
25 April 2024
25 April 2024
25 April 2024