Joy-it JT3.5TR Handleiding
Bekijk gratis de handleiding van Joy-it JT3.5TR (9 pagina’s), behorend tot de categorie Speelgoed. Deze gids werd als nuttig beoordeeld door 78 mensen en kreeg gemiddeld 4.8 sterren uit 39.5 reviews. Heb je een vraag over Joy-it JT3.5TR of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/9
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
3.2" / 3.5" TOUCH DISPLAY-
For the pinning on the Raspberry Pi
1. GENERAL INFORMATION
Dear customer,
Thank you for purchasing our product. In the following, we will show you
which things should be noted during the use.
Should you encounter any unexpected problems, do not hesitate to contact
us
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
2. OVERVIEW
3.2" Display 3.5" Display
Controller XPT2046
Resolution 320 x 240 480 x 320
Colors 65.536
3. CONNECTION
Put the 3.2" / 3.5" TFT Display on the Raspberry Pi so that the first 26 -
pins of the GPIO pin header are plugged in. Aer that, the
backgroundlight of the display is turned on.
4. INSTALLATION OF THE SOFTWARE
Install the TFT image on your SD card with a program like the - - Win32 Disk- -
Imager. You can download the images via the following links:
For the 3.2" display, you find the downloads .here
For the 3.5" display, you find the downloads .here
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
Manual installation
If you already use another Raspbian image and you want to expand it
with the 3.2" / 3.5" touchscreen TFT, you can install the modules on your -
system subsequently.Therefore, you must edit the file
config.txt
.
You have to open the terminal on your Raspberry Pi and enter following
command:
sudo nano /boot/config.txt
Add here, depending on the display, the following lines at the beginning of
the opened file:
For the 3.2" TFT display:-
dtparam=spi=on
dtoverlay=joy IT Driver32b overlay:rotate=270,swapxy=1- -Display- -
dtparam=audio=on
max_usb_current=1
hdmi_force_hotplug=1
config_hdmi_boost=7
hdmi_drive=1
hdmi_ignore_edid=0xa5000080
For the 3.5" TFT display:-
dtparam=spi=on
dtoverlay=joy IT- -Display_Driver35a- overlay:rotate=270,swapxy=1
dtparam=audio=on
max_usb_current=1
hdmi_force_hotplug=1
config_hdmi_boost=7
hdmi_drive=1
hdmi_ignore_edid=0xa5000080
With the ,you have to make some additional settings. For Raspberry Pi 4
that, you have to comment out in the file config.txt beneath point
[pi4]
the
command
dtoverlay=vc4 fkms v3d - -
so it looks like the following:
[pi4]
# Enable DRM VC4 V3D driver on top of the dispmanx display stack
#
#dtoverlay=vc4 fkms v3d < Diese Einstellung muss mit einer # auskommentiert werden- - ----
max_framebuffers=2
Now safe the file with the key combination , confirm with CTRL + O Enter
and leave the file with . Now the file CTRL + X
cmdline.txt
must be edited:
sudo nano /boot/comdline.txt
Product specificaties
| Merk: | Joy-it |
| Categorie: | Speelgoed |
| Model: | JT3.5TR |
Heb je hulp nodig?
Als je hulp nodig hebt met Joy-it JT3.5TR stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Speelgoed Joy-it
5 Juli 2023
4 Juli 2023
4 Juli 2023
29 Juni 2023
Handleiding Speelgoed
- Easypix
- Kids Knex
- Crivit
- Quadro
- Spin Master
- Sun Baby
- MJX
- Jobe
- Tiamo
- Woodlii
- Syma
- Cosco
- Sunny
- Swurfer
- Darwin FPV
Nieuwste handleidingen voor Speelgoed
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025